The documentation for G_TYPE_CHAR says:
"The type designated by G_TYPE_CHAR is unconditionally an 8-bit signed
integer."
However the return value for g_value_get_char() was just "char" which
in C has an unspecified signedness; on e.g. x86 it's signed (which
matches the GType), but on e.g. PowerPC or ARM, it's not.
We can't break the old API, so we need to suck it up and add new API.
Port most internal users, but keep some tests of the old API too.
https://bugzilla.gnome.org/show_bug.cgi?id=659870
Otherwise we might collide with an interface called Connection.
https://bugzilla.gnome.org/show_bug.cgi?id=659699
This is for the same reason that GDBusProxy has its properties
prefixed with g-.
Signed-off-by: David Zeuthen <davidz@redhat.com>
We ignore entries with mountpoint of "swap" and "ignore". Add "none" to
that list, since Debian uses it.
Probably we should move to using our already-existing internal list of
things to ignore, but this patch is more minimally intrusive for now.
https://bugzilla.gnome.org/show_bug.cgi?id=654563
Commit afa82ae805 introduced a compilation
regression on BSD systems that use the sysctl(3) interface; we need to
declare the buffer len in _g_get_unix_mount_points()
BZ #659528
In registration_data_export_interface(), the object_path is obtained using:
object_path = g_dbus_object_get_object_path (G_DBUS_OBJECT (data->object));
But when exporting an object uniquely, the object_path is not assigned
to the GDBusObject until after all the interfaces are exported.
Therefore, registration_data_export_interface() is trying to export
the interface on the non-unique object path, which can lead to
run-time errors if an object already exists on that path.
Instead, registration_data_export_interface() should be passed the
object_path explicitly, as is done in
g_dbus_object_manager_server_export_unlocked().
Signed-off-by: David Zeuthen <davidz@redhat.com>
Ensure that the output/target stream in a g_output_stream_splice_async()
operation is marked as closed if G_OUTPUT_STREAM_SPLICE_CLOSE_TARGET is
passed to g_output_stream_splice_async(). This removes the possibility of
local FDs being closed twice because the stream's not marked as closed.
This is implemented by calling g_output_stream_close() from within
g_output_stream_splice_async() instead of calling the stream's close_fn()
directly.
Closes: bgo#659324
Otherwise, we could use-after-free the GDBusWorker, if its last-unref
is immediately after _g_dbus_worker_new returns (before the worker thread
does its initial read).
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=651268
Bug-NB: NB#271520
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Zeuthen <davidz@redhat.com>
This member is written in _g_dbus_worker_stop from arbitrary threads, and
read by the worker thread, so it should be accessed atomically.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=651268
Bug-NB: NB#271520
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Zeuthen <davidz@redhat.com>
We can't safely close the output part of the I/O stream until any
pending write or flush has been completed. In the worst case, this could
lead to an assertion failure in the worker (when the close wins the
race) or not closing the stream at all (when the write wins the race).
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=651268
Bug-NB: NB#271520
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Zeuthen <davidz@redhat.com>
num_writes_pending was a counter, but it only took values 0 or 1, so make
it a boolean: it would never make sense to be trying to write out two
messages at the same time (they'd get interleaved).
Similarly, we can never be writing and flushing at the same time (that'd
mean we were flushing halfway through a message, which would be pointless)
so combine it with flush_pending too, calling the result output_pending.
Also assert that it takes the expected value whenever we change it,
and document the locking discipline used for it, including a subtle
case in write_message_in_idle_cb where it's not obvious at first glance
why we don't need the lock.
(Having the combined boolean at the top of the block of write-related
struct members improves struct packing on 64-bit platforms, by packing
read_num_ancillary_messages and output_pending into one word.)
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=651268
Bug-NB: NB#271520
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add an extra state pointer and an extra GDestroyNotify function
to the 'Chunk' definition... allowing bindings to attach some extra
state to memory chunks (to get memory management correctly from
language bindings).
Bug #589887
The GApplication test case tried to fork() while using GMainLoop,
causing problems. Avoid doing that by splitting the child process into
a separate program and spawning it in the usual way.
https://bugzilla.gnome.org/show_bug.cgi?id=658999
The 'key' variable is no longer valid outside the cycle, owned and
probably already freed by GVariant. This causes apps to segfault
when proxy is constructed and a property on remote d-bus service
changes (actually is invalidated). Looks like a typo anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=659070
* Do not ignore the system default
* Do not exclude the last used being set from the default list
This fixes the default applications dialog in control-center.
https://bugzilla.gnome.org/show_bug.cgi?id=658188
Historically we've added random symbols to the public API with warnings
that they're private; examples are:
glib_gettext(), glib_pgettext()
g_thread_functions_for_glib_use, g_thread_use_default_impl, etc.
And we almost added "GWakeup" to public API just to share between glib and
gio.
This new glib__private__() API exports a hidden vtable, and adds a macro
GLIB_PRIVATE_CALL() that makes it generally convenient to use.
This adds an extremely tiny cost for the double indirection; but it has
the benefit that we don't need to either:
1) compile the code into both glib and gio (like GWakeup), with the
inefficiency that implies.
2) Export a "do not use this" symbol; the serious problem with this is
that someone CAN use it pretty easily. Particularly if we document
it. It's far, far harder to peek into a structure without a public
header file.
https://bugzilla.gnome.org/show_bug.cgi?id=657992
g_thread_gettime() is an undocumented public function pointer that
points to a function that returns the monotonic time in nanoseconds.
g_get_monotonic_time() does the same in microseconds, so it can be used
instead.
GLib had one internal user in GFileMonitor that only cared about
millisecond accuracy; it has been ported to g_get_monotonic_time().
In particular, remove the libasyncns import, which was only used by
GUnixResolver, which is only used when threads are not available.
Likewise remove GWin32Resolver, and the hacky broken non-threaded
parts of GIOScheduler.
https://bugzilla.gnome.org/show_bug.cgi?id=616754
G_THREADS_ENABLED still exists, but is always defined. It is still
possible to use libglib without threads, but gobject (and everything
above it) is now guaranteed to be using threads (as, in fact, it was
before, since it was accidentally impossible to compile with
--disable-threads).
https://bugzilla.gnome.org/show_bug.cgi?id=616754
Non-technical users won't know that "stating" refers to stat(2), so we
just use "error when getting information" now.
Signed-off-by: Federico Mena Quintero <federico@gnome.org>
When g_settings_apply() is called on a delayed settings backend and
there is a D-Bus error when communicating with dconf-service, recent
versions of the dconf GSettingsBackend call a function in GLib that
improperly delivered the signal directly instead of using
g_main_context_invoke().
This patch fixes this function to route in the same way as the others so
that the signal is dispatched in the proper GMainContext.
- getmntinfo can take struct statfs or statvfs depending on the
OS. Use getvfsstat and if not found getfsstat instead. Idea from
Dan Winship.
- g_local_file_query_filesystem_info(): use statvfs.f_fstypename
if available
https://bugzilla.gnome.org/show_bug.cgi?id=617949
The threaded tests are using the default main context in the worker
thread, but were not g_main_context_acquire()ing it first, which meant
that g_tls_interaction_invoke_ask_password() in the main thread would
sometimes succeed in acquiring it itself and thus performing the
operation in the wrong thread. Fix that.
Also, we can't unref the loop from the worker thread, because the main
thread isn't holding a reference on it, and so it might end up being
destroyed while that thread is still inside g_main_loop_quit().
(which shouldn't ever have been part of the API. Grr.)
Solaris /etc/services doesn't even have "http", which was causing
tests/network-address to fail...
On Solaris, getsockname() on an unconnected socket gives an addrlen of
0 and doesn't set the sockaddr. So use the SO_DOMAIN sockopt to find
the socket family in that case. (SO_DOMAIN doesn't exist everywhere,
so we can't use it unconditionally. Also, we have to only use it if
getsockname() fails, since SO_DOMAIN returns a bogus value for
accept()ed sockets on both Linux and Solaris...)
Also, link libgio to -lresolv explicitly, rather than depending on
getting it implicitly via the libasyncns build (which should
eventually be going away).
https://bugzilla.gnome.org/show_bug.cgi?id=645336
* Add 'invoke' style method, which can be used to call an interaction
from any thread. The interaction will be run in the appropriate
#GMainContext
* Sync methods can be called whether main loop is running or not.
* Derived classes can choose to implement only sync or async
interaction method, and the invoke method will fill in the blanks.
* Documentation for the above.
* Tests for the above.
https://bugzilla.gnome.org/show_bug.cgi?id=657567
g_desktop_app_info_set_as_default_for_type() and
g_desktop_app_info_set_as_last_used_for_type () require the
application's ID, but depending on how the GAppInfo was created,
we might not be have one, and would thus silently fail to set
the default application, or last used application.
https://bugzilla.gnome.org/show_bug.cgi?id=657445
The test was using a socket in a temporary directory, but not actually
creating that temporary directory. This worked fine on Linux since it
actually ended up using an abstract socket instead, but failed on
unixes without abstract sockets.
https://bugzilla.gnome.org/show_bug.cgi?id=657517
The docs for g_socket_set_timeout() claimed that if an async operation
timed out, the GIOCondition passed to the source callback would be
G_IO_IN or G_IO_OUT (thus prompting the caller to call
g_socket_receive/send and get a G_IO_ERROR_TIMED_OUT), but in fact it
ended up being 0, and gio/tests/socket.c was erroneously testing for
that instead of the correct value. Fix this.
* Load modules from paths listed in GIO_EXTRA_MODULES environment
variable first.
* Ignore duplicate modules based on module basename.
* Add the concept of GIOModuleScope which allows other callers to
skip duplicate loaded modules, or block specific modules based on
basename.
* Document behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=656914
* Add cancellable argument to g_tls_interaction_ask_password
and g_tls_interaction_ask_password_async.
* This is API breakage, but this API has not yet been released
in a stable release (and very unlikely used yet).
* Since we're breaking unreleased API, expand amount of padding
on GTlsInteractionClass because we're going to need it.
https://bugzilla.gnome.org/show_bug.cgi?id=656443
Change the hardcoded /usr/bin/python shebag from gdbus-codegen.in into
@PYTHON@. Is used in Makefile.am to use detected python binary.
$(AM_V_GEN) sed -e 's,@libdir\@,$(libdir),' -e 's,@PYTHON\@,$(PYTHON),'
$< > $@.tmp && mv $@.tmp $@
Signed-off-by: Ionut Biru <ibiru@archlinux.org>
https://bugzilla.gnome.org/show_bug.cgi?id=657274
Rework property getters to use a vfunc so we can take the fast path
and avoid allocating memory for both the skeleton and the proxy
cases. This requires some special case because of how GVariant expects
you to free memory in some cases, see #657100. Add test cases for
this.
Document the _get_ functions as not being thread-safe and also
generate _dup_ C getters (which are thread-safe).
Mark all the generated _get_, _dup_ and _set_ as (skip) as non-C
languages should just use GObject properties and not the (socalled)
"C binding".
Signed-off-by: David Zeuthen <davidz@redhat.com>
The main rationale for adding it was to avoid having gnome-shell
mmap'ing /etc/localtime once a second. However, we can just as easily
run inotify there, and given no one else was clamoring for a way to
detect when the time zone changes, I don't see a need for public API
here - at least not yet.
In the bigger picture, I just don't believe that the vast majority of
applications are going to go out of their way to instantiate and keep
around a random GTimeZoneMonitor class. And if they do, it's has the
side effect that for other bits of code in the process, local GDateTime
instances may start varying again!
So, if code can't rely on local GDateTime instances being in a
consistent state anyways, let's just do that always. The
documentation now says that this is the case. Applications have
always been able to work in a consistent local time zone by
instantiating a zone and then using it for GDateTime constructors.
We fix the "gnome-shell stats /etc/localtime once a second" issue by
using timerfd (in glib) and inotify (in gnome-shell).
https://bugzilla.gnome.org/show_bug.cgi?id=655129
* Update documentation to note that GCancellable can be used
concurrently by multiple operations.
* Add documentation to g_cancellable_reset that behavior is
undefined if called from within cancelled handler.
* Add test for multiple concurrent operations using the same
cancellable.
https://bugzilla.gnome.org/show_bug.cgi?id=656387
Destroying a GDBusProxy in a thread used to race with NameOwnerChanged
being delivered to the main context's thread (GNOME #651133).
Also, g_dbus_proxy_call_sync in a thread would race with NameOwnerChanged
being delivered to the main context's thread and rewriting the name_owner
(GNOME #656039).
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=656039
Bug-NB: NB#259760
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Zeuthen <davidz@redhat.com>
This changes the meaning of "properties_lock" from "lock for D-Bus
properties" to "lock for GObject properties".
The most common problem, and the only one I've reproduced in a regression
test, is name_owner, which can be updated by the thread that owns
the GDBusProxy's main context (i.e. the thread-default main context of
the thread that constructed it) at the same time that a blocking call
is made. When a GDBusProxy is constructed in a thread-pool thread for
short-term use, the main context will typically be the global default
main context (which is actively running in the main thread!), making
this extremely problematic.
The interface info is perhaps a theoretical concern - one thread could
conceivably set it at the same time that another thread uses it, but only
in relatively pathological situations. The current API for this does have
the problem that it returns a borrowed ref, but interface info is
hopefully permanent anyway.
The default timeout is probably only a theoretical concern - it's just an
int, so writes are indivisible, and there's no worry about whether
something has been freed - but to be safe, let's hold the lock for that
too.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=656039
Bug-NB: NB#259760
Signed-off-by: David Zeuthen <davidz@redhat.com>
This removes the need for async_init_get_name_owner_cb to cope with being
called without a real GAsyncResult, and will simplify the addition of
correct thread-locking.
In async_init_data_set_name_owner, use the name_owner parameter instead
of the corresponding member of GDBusProxyPrivate, partly to reduce
pointer-chasing but mainly to avoid needing to hold the lock.
Signed-off-by: David Zeuthen <davidz@redhat.com>
These ought to have thread-locking, and having it in the accessor seems
better than duplicating it here.
Signed-off-by: David Zeuthen <davidz@redhat.com>
If you run:
( cd gio/tests && G_DBUS_DEBUG=all ./gdbus-proxy-well-known-name )
you can see that in the case where the name com.example.TestService isn't
owned yet, the GDBusProxy calls GetAll() with no destination, resulting
in an error reply from the peer (the dbus-daemon itself). That's clearly
not right!
However, if priv->name is NULL, that indicates the special case where we
really do want to talk directly to a peer, instead of via the bus daemon
(most likely to be used on peer-to-peer connections); in that special
case, do call GetAll().
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is needed because the proxy may need to update its internal state
which a signal handler connected to the manager may rely on.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This avoids calling g_variant_unref and g_free on uninitialized memory
if PropertiesChanged is received in the creating thread's thread-default
main context's thread, at the same time as releasing the last ref in
another thread. This would result in "goto out" before the variables
freed after that label had been initialized to NULL.
Based on a patch by Simon McVittie, bug 656282
Prepare for the future where udisks will use $XDG_USER_DIR/Volumes
instead of /media when mounting filesystems on behalf of the user.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Found by GIR compiler when building gobject-introspection:
gir/gio-2.0.c:33525: Warning: Gio: g_tls_password_set_description: unknown
parameter 'flags' in documentation comment, should be one of 'password',
'description'
gir/gio-2.0.c:14568: Warning: Gio: g_action_group_action_state_changed: unknown
parameter 'state' in documentation comment, should be one of 'action_group',
'action_name', 'value'
The database is an abstract object implemented by the various TLS
backends, which is used by GTlsConnection to lookup certificates
and keys, as well as verify certificate chains.
Also add GTlsInteraction, which can be used to prompt the user
for a password or PIN (used with the database).
https://bugzilla.gnome.org/show_bug.cgi?id=636572
socket->priv->connected was only being set if g_socket_connect()
succeeded right away; in the case where it returns G_IO_ERROR_PENDING,
it never got set. Fix that by having g_socket_check_connect_result()
set it on success.
Otherwise, we may run into trouble as opening a peer-to-peer
connection uses a socket client, which uses a proxy resolver
which may end up using gsettings, whose dconf backend may end
up using the session bus to talk to dconfd...
Also add convenience _with_unix_fd_list variants to GDBusConnection,
GDBusProxy and GDBusMethodInvocation types to easily support this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
The code-generator already uses GVariant* so generated code didn't
really work at all. We want that instead of gint to avoid confusion
because a 'h' instance is an _index_ into a GUnixFDList, not a file
descriptor.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is possible now that we have better support for object path
arrays, see
http://git.gnome.org/browse/glib/commit/?id=19878998bc386db78614f1c92ff8524a81479c7b
Note that this breaks the ABI of generated code but since
gdbus-codegen(1) has never yet been in a stable GLib release, this is
fine.
Signed-off-by: David Zeuthen <davidz@redhat.com>
- move choice of statfs vs statvfs from gio/glocalfile.c to configure.ac
- if statvfs is the choice, then don't check number of arguments to statfs()
- use choice in gio/gunixmounts.c as well
https://bugzilla.gnome.org/show_bug.cgi?id=617949
This function implements the following logic:
if (g_variant_is_floating (value))
g_variant_ref_sink (value);
which is used for consuming the return value of callbacks that may or
may not return floating references.
This patch also replaces a few instances of the above code with the new
function (GSettings, GDBus) and lifts a long-standing restriction on the
use of floating values as the return value for signal handlers by
improving g_value_take_variant().
https://bugzilla.gnome.org/show_bug.cgi?id=627974
The -e parameter to echo isn't recognized by echo in POSIX sh,
but isn't needed when no escaped characters need to be
interpreted.
This fixes building glib with a mingw cross compiler on Mac OS X.
https://bugzilla.gnome.org/show_bug.cgi?id=654085
-In gio/Makefile.am, the name for one of the filters for capturing the
sources for the GIO VS Project Files is corrected.
-Remove the GIO source file items in the VS project files templates as
a result for this change, and move the entry of the "new"
gregistrysettingsbackend.c into the filter in gio/Makefile.am
GAction is a read-only interface (as is visible by the lack of _set() functions
on its API). The properties on the interface currently force implementors to
support writing of the properties at construct time, however.
Lift that restriction.
Take advantage of this from GSimpleAction by nuking the set_property
function and setting the fields directly in the constructor.
This commit represents an API break to GAction in the following ways:
- the 'set_state' entry in the GActionInterface vtable has been
renamed to 'change_state'. The number and order of vtable items has
not otherwise changed.
- g_action_set_state() has been renamed to g_action_change_state() to
match the updated vtable entry.
- the "state" property of the GAction interface has been changed to
read-only to reflect the fact that g_action_set_state() no longer
exists.
- GSimpleActionClass has been hidden. GSimpleAction can no longer be
subclassed.
>> Rationale
g_action_set_state() has never been a true setter in the sense that
calling it will update the value of the "state" property. It has always
been closer to "request 'state' to be changed to this value" with
semantics defined by the implementor of the interface. This is why the
equivalent method in GActionGroup had its name changed from 'set' to
'change'. This change makes the two interfaces more consistent and
removes any implication about the effect that calling set_state() should
have on the 'state' property.
>> Impact
This incompatible API break was undertaken only because I strongly
suspect that it will go entirely unnoticed. If the break actually
affects anybody, then we will accommodate them (possibly going as far as
to revert this commit entirely).
The virtual table change only impacts implementors of GAction. I
strongly suspect that this is nobody (except for GSimpleAction).
The hiding of GSimpleActionClass only impacts impacts subclasses of
GSimpleAction. I strongly suspect that none of these exist.
The changing of the property to be read-only only affects people who
were trying to change the state by using GObject properties. I strongly
suspect that this is nobody at all.
The removal of the g_action_set_state() call is the most dangerous, but
I still suspect that it will impact nobody outside of GLib. If anybody
is impacted by this change then, at their request, I will reintroduce
the API as a deprecated alias for g_action_change_state().
To help cross compilation, don't use glib-genmarshal in our
build. This is easy now that we have g_cclosure_marshal_generic().
In gobject/, add gmarshal.[ch] to git (making the existing entry
points stubs).
In gio/, simply switch to using g_cclosure_marshal_generic().
https://bugzilla.gnome.org/show_bug.cgi?id=652168
... otherwise we might end up using the worker after it has been
freed. Reported by Dan Winship and Colin Walters.
This fix uncovered a bug in the /gdbus/nonce-tcp test case so "fix"
that as well to use a better way of having one thread wait for another
(using quotes for the word "fix" since it's pretty hackish to
busy-wait in one thread to wait for another).
Signed-off-by: David Zeuthen <davidz@redhat.com>
These will validate the resulting line, and throw a conversion error.
In practice these will likely be used by bindings, but it's good
for even C apps too that don't want to explode if that text file
they're reading into Pango actually has invalid UTF-8.
https://bugzilla.gnome.org/show_bug.cgi?id=652758
g_data_input_stream_read_line() and
g_data_input_stream_read_line_finish() don't do any encoding checks,
so we shouldn't call the returned value a "string" (which I'd like to
mean UTF-8). Annotate them as byte arrays and add encoding warnings
to the docstrings.
https://bugzilla.gnome.org/show_bug.cgi?id=652758
Matthew Bucknall pointed out
GDBusMessage does not serialize/deserialize double values correctly
on platforms with strict alignment constraints (in my particular
case, ARM926EJ-S).
This was reported in
https://bugzilla.gnome.org/show_bug.cgi?id=652197
Signed-off-by: David Zeuthen <davidz@redhat.com>
Rather than having the gtk-doc build machinery have a list of header
files to exclude, change the GLib build to dump a list of public
header files generated from the maintained Makefile.am files for
each of glib/, gobject/, gio/.
Also, for glib, always install glib-unix.h, even on non-Unix
platforms, for the same reason we install gwin32.h even on Unix.
https://bugzilla.gnome.org/show_bug.cgi?id=651745
See https://bugs.freedesktop.org/show_bug.cgi?id=37890#c6 where it was
discovered that dbus-send(1) actually doesn't work (either libdbus-1's
flush implementation or dbus-send(1)'s usage of it is broken) so it's
useful to have here.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This avoids the generated types (e.g. ExampleAnimal, ExampleCat,
ExampleObject and ExampleObjectManagerClient) being referenced in the
core gio docs. This was requested by Matthias.
Signed-off-by: David Zeuthen <davidz@redhat.com>
I can't see a reason to spin until the worker thread runs, so don't.
This avoids ugly sched_yield() calls that show up in strace and
annoy me; the code is cleaner now too.
We now grab the types needed for the WebKit workaround in the
thread creation area, but only release them when the thread itself
exits.
https://bugzilla.gnome.org/show_bug.cgi?id=651650
In resolve_sync function in gthreadedresolver.c, if g_thread_pool_push
fails due to thread creation failure, we are just simply appending the
data to the queue of work to do. After the failure, we might wait
indefinitely in g_cond_wait. In case of g_thread_pool_push failure,
propagate the error so that this function does not blocks forever in
case of failure.
https://bugzilla.gnome.org/show_bug.cgi?id=651034
The fact that we return 0 here makes it clear that this
is not considered an error, so it makes sense to not
write these messages to stderr.
Proposed by Antoine Jacoutot,
https://bugzilla.gnome.org/show_bug.cgi?id=650882
The grouping in files/headers is not used anymore, and
the function attributes neither. Adapt abicheck scripts
and .def file generation rules accordingly.
There are some bugs caused by the way that gsettings-tool currently
attempts to help the user when they leave the quotes off of a string
value that they are setting.
Simplify the code to make it more robust and add some comments about why
it should be done this way.
https://bugzilla.gnome.org/show_bug.cgi?id=649915
For example, if setting a property on a skeleton from another thread
than where it was constructed, the idle handler responsible for
emitting the PropertiesChanged() signal could run immediately and
clear skeleton->priv->changed_properties_idle_source causing
g_source_unref() to be called with a NULL pointer. This race was
easily be fixed by adding a lock to the skeleton object.
In addition to fixing this race, also move the code for setting up the
idle handler to a class handler for the GObject::notify signal. This
change allows use of g_object_freeze_notify() and g_object_thaw_notify()
to perform atomic property changes from another thread than the one
that the skeleton was created in.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Don't drop resets from a GDelayedSettingsBackend when the writability
changes. Resets will always succeed, even against non-writable keys and
some people (gnome-screensaver) are using them in a way that they would
want them not to be forgotten.
This can easily happen if the owner of the remote object vanishes. Of
course, when that happens, user code is already notified (by e.g. the
notify::g-name-owner signal) so it can avoid using the proxy but
requiring that is a bit harsh. IOW, before this patch this critical
error was printed
GLib-GIO-CRITICAL **: g_dbus_gvariant_to_gvalue: assertion `value != NULL' failed
when that happened. With this patch, we just avoid setting the GValue
so the user will get the default value for its type instead. So, for
example, if the user code is getting a GVariant property on such a
defunct proxy, then he gets a NULL back. So unless said user code
checks the return value, criticals will still be printed if the NULL
GVariant is used for anything interesting.
Signed-off-by: David Zeuthen <davidz@redhat.com>
The code generator sprinkles a few asserts in its output of the form:
g_assert (prop_id - 1 >= 0 && prop_id - 1 < %d);\n
prop_id is unsigned, though, so this generates a compiler warning for
me.
This commit changes the code to merely check for prop_id != 0 instead of
prop_id - 1 >= 0
.. and add a C setter to do this. Also make the C getter return a
reference since the property may be set from another thread. Also
change the constructor to _not_ take a GDBusConnection since this is
something you almost always want to do _after_ creating it. The
API/ABI break is fine as there has never been a GLib release with this
type.
https://bugzilla.gnome.org/show_bug.cgi?id=648959
Signed-off-by: David Zeuthen <davidz@redhat.com>
_GNU_SOURCE must be defined before including any other (system)
header, so defining it in glib-unix.h (and hoping no one has included
anything else before that) is wrong. And the "#define _USE_GNU"
workaround for this problem in gnetworkingprivate.h is even wronger
(and still prone to failure anyway due to single-include guards).
Fix this by defining _GNU_SOURCE in config.h when building against
glibc. In theory this is bad because new releases of glibc may include
symbols that conflict with glib symbols, which could then cause
compile failures. However, most people only see new releases of glibc
when they upgrade their distro, at which point they also generally get
new releases of gcc, which have new warnings/errors to clean up
anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=649201
GDesktopAppInfo violates the GObject rule that your C constructors
should just be thin wrappers around g_object_new(). While GKeyFile
isn't introspctable, this patch allows from JavaScript:
var app = new Gio.DesktopAppInfo({ filename: '/path/to/foo.desktop' });
https://bugzilla.gnome.org/show_bug.cgi?id=648425
When an old pre-thread-default-context API that takes an explicit
GMainContext wants to call a gio API, it must call
g_main_context_push_thread_default() before, and
g_main_context_pop_thread_default() after the gio call, so that the
gio method will return its result to the desired GMainContext.
But this fails for methods like g_socket_client_connect_async() that
make a chain of multiple async calls, since the pushed/popped context
will only affect the initial call.
Fix this by having GSimpleAsyncResult itself push/pop the context
around the callback invocation, so that if the callback queues another
async request, it will stay in the same context as the original one.
https://bugzilla.gnome.org/show_bug.cgi?id=646957
This is nice to have if using gtk-doc on the generated code. We could
also generate -sections.txt and .types files but we don't do that
right now...
Signed-off-by: David Zeuthen <davidz@redhat.com>
Specific changes
- Use get_type(), not get_gtype() for the GType function
- so we need to use the lower-case name type_ for properties called type
- Don't return a function pointer, just make the function returned
available instead
- Add (type) annotations in constructors so g-ir-scanner detects them as such
- Add (transfer none) annotations to property getters
- Add (out) annotations to D-Bus method call functions
Signed-off-by: David Zeuthen <davidz@redhat.com>
It's not that it's actually a bug to do so per se, strictly speaking,
it's just pointless and wasteful.
Signed-off-by: David Zeuthen <davidz@redhat.com>
A fairly typical pattern is to have code that does
foo_set_bar (object, "");
if (some_condition)
{
foo_set_bar (object, "yes");
}
where some_condition is often true every time @object is updated.
With this code, bar is essentially always "yes" but because of how
gdbus-codegen works, useless PropertiesChanged events got scheduled
and sent out. With this patch, we avoid that by always keeping the
original value around and comparing it only when we deem it's time to
send out the ::PropertiesChanged signal (typically in an idle but can
be forced by the user via flush()).
Also add a test case for this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
More precisely, include this line
The license of this code is the same as for the source it was derived from.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Older versions of libdbus would let you construct an invalid
DBusMessage, but that's a bug, which will be fixed in 1.4.8/1.5.0.
Instead, construct a valid message of the same length, then replace
substrings in the serialized blob with their invalid counterparts.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=646326
Signed-off-by: David Zeuthen <davidz@redhat.com>
... this was causing a GDBus test-case to fail so now that it is
fixed, also reenable the test case.
https://bugzilla.gnome.org/show_bug.cgi?id=631379
Signed-off-by: David Zeuthen <davidz@redhat.com>
If g_bus_get_sync() fails in authentication (because e.g. the process
uid, doesn't match the expected in EXTERNAL), a secondary call to
g_bus_get_sync() would notice we aren't initialized, and try
to initialize.
The assertion here is just wrong; we now explicitly and clearly handle
both cases where we already have an error, or we already succeeded.
https://bugzilla.gnome.org/show_bug.cgi?id=635694
And use this for a) documentation purposes; and b) to preserve C ABI
when an interface is extended. See
https://bugzilla.gnome.org/show_bug.cgi?id=647577#c5
for more details. Also add test cases for this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is because gtk-doc scans the function in the H file but reads the
docs from the C file. Annoying.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Call g_settings_sync() just before g_applcation_run() returns. This is
really the correct thing to do in every case that you're using GSettings
and it prevents every single application from having to do it for
themselves.
Closes bug #647419.
If GSettings is uninitialised then g_settings_sync() should very
obviously just return right away (rather than attempting to initialise
GSettings first).
Add a flag to essentially short-circuit g_application_register(). The
application makes no attempt to acquire the bus name or check for
existing instances with that name. The application is never considered
as being 'remote' and all requests are handled locally.
Closes#646985.
Several flaws were pointed out by Shaun McCance. We were
leaking handled arguments, and we were mishandling the last
argument, and we were actually skipping arguments too.
https://bugzilla.gnome.org/show_bug.cgi?id=647031
When using GOption to handle commandlines, we need to disable
the builtin help handling, since it calls exit(). Also mention
this particular pitfall in the docs.
For child schemas, verify that the named schema actually exists and
issue a warning if not. This error in schema files will cause runtime
errors when iterating over the list of child schemas and attempting to
instantiate each one.
This will move from being merely a warning to a hard error in the
future.
Bug #646039.
g_tls_certificate_list_new_from_file() was leaking the file contents,
and GSource was leaking the GSourcePrivate structure that got
created when using child sources.
Without getting into a debate about the reasons why you may or may not
want to use unsigned integers, it's sufficient to note that people have
been using them and requesting this functionality.
Bug #641755.
If we have an expected interface and receive a signal not mentioned in
the interface, simply drop it. This way, the application won't have to
check for the signal itself.
This was pointed out in
https://bugzilla.gnome.org/show_bug.cgi?id=642724#c5
Signed-off-by: David Zeuthen <davidz@redhat.com>
If the proxy has an GInterfaceInfo set, validate properties against it
so the application doesn't have to do it.
Signed-off-by: David Zeuthen <davidz@redhat.com>
* gio/gfileattribute.c: (_g_file_attribute_value_get_string,
_g_file_attribute_value_set_string): These use
G_FILE_ATTRIBUTE_TYPE_STRING, which is documented as UTF-8, so
document these private functions as using UTF-8.
* gio/gfileinfo.c: (g_file_info_get_attribute_string,
g_file_info_set_attribute_string, and stringv versions):
Document that the strings are UTF-8 because the implementation uses
those private functions, that use UTF-8.
This helps language bindings (such as glibmm) whose API
distinguishes between known and unknown encodings.
* gio/application.c (g_application_real_command_line): Check that the
default signal handler is not the current one before complaining, because
it is not unusual for overloads to call the base class implementation as
a matter of habit.
g_application_real_open() and g_application_real_activate() already do this
extra check.
Make the schema argument to gsettings list-recursively optional.
This allows to search for not exactly known keys by going
gsettings list-recursively | grep 'font'
These are the updates to the autotools files to
ensure the expansion of the GIO, GLib and GObject
project files (*.vcxproj, *.vcxproj.filters) and to
enable the distribution of the VS2010 project files
The actual VS2010 project files will follow shortly
We were considering explicitly configured defaults for parent types
after we already got results for the specific type we're interested in.
This resulted in the explicit default for text/plain to override all
system defaults for subtypes of text/plain, for example. The explicit
default should not apply to subtypes that have a system default.
https://bugzilla.gnome.org/show_bug.cgi?id=642797
Accept (and silently ignore) version attributes on <interface>
and <method> elements - these occur in the wild, and ignoring
them does not cost us anything.
We were getting our length zero, yet NULL-terminated arrays in
a twist in some places. Stop passing around ignored length arguments
at the same time.
https://bugzilla.gnome.org/show_bug.cgi?id=635099
This will help applications such as zeitgeist's datahub to collect
more complete information about application launches, as the "actor"
of a launch is important for zeitgeist's magic to work properly.
If we were the initial connection owner, unref will destroy the
connection immediately, and we may lose messages. Asynchronously
flush to avoid that.
https://bugzilla.gnome.org/show_bug.cgi?id=641411
Some people are trying to write code that calls g_application_register()
then checks to see if we became the primary name owner before exporting
objects. This sort of approach worked with libdbus-1 because method
calls to the freshly-acquired name would not be dispatched until the
application returned to the mainloop. With GDBus, however, dispatches
can occur at any time (including in the brief space between acquiring
the name and actually registering the object).
Add documentation to make it clear that you should not expect this to
work.
The existing docs are a bit inconsistent in that they say to follow
the dbus convention, but then give an example that doesn't.
This commit changes things to be how Ryan says they should be.
There are now fallback functions in the Win32 portion of
g_app_info that were previously only available under UNIX,
so add them here so that they can be exported as well.
The symbols are as follows:
g_app_info_get_fallback_for_type
g_app_info_get_recommended_for_type
If code creates a GDesktopAppInfo via g_desktop_app_info_new_from_keyfile(),
we'd try to send a NULL pointer down into GVariant.
Since in this case we don't have a filename, just send the empty
string. In the future we should either:
1) Change panel to use g_desktop_app_info_new_from_filename(), and
take the hit of parsing the file twice.
2) Add a g_key_file_get_origin_filename()
3) Add g_desktop_app_info_new_from_keyfile_and_name()
https://bugzilla.gnome.org/show_bug.cgi?id=638838
Add missing properties in the GDummyTlsConnection class. Also add
namespaces to property enumerations to avoid conflicts between classes.
Reviewed-by: Dan Winship <danw@gnome.org>
This property is now a GList of GByteArray values. Each
GByteArray contains the raw DER DN of the certificate authority.
This is far more useful for looking up a certificate (with the
relevant issuer) than a string encoded DN.
https://bugzilla.gnome.org/show_bug.cgi?id=637262
A new GDesktopAppInfo specific function which provides more control
over launched processes. Intended basically only for use in GNOME
Shell, where we want:
*) To directly know the GPid for each launched program, without
having to listen to a DBus signal emitted in our own process
*) Possibly control over the process environment; for example,
we may want to call setsid() or redirect file descriptors.
And in the future:
*) To avoid recursively calling ourself via DBus, when a later
patch causes g_app_info_launch() to indirect via the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=606960
This signal contains the full path of the .desktop file, along with
the process id, which allows multiple interested components (like
GNOME Shell) to better know the state of the system (which processes
correspond to which .desktop files).
https://bugzilla.gnome.org/show_bug.cgi?id=606960
We want to be compatible with the following situation:
- there's no explicit default set in mimeapps.list
- we add support for a content type to a specific application, and that
list is empty
- the default should be picked from the system list, not overridden by
the user-added application.
So we make the default explicit in this case, by adding it to the
relevant section in mimeapps.list.
https://bugzilla.gnome.org/show_bug.cgi?id=637675
This commit also changes (maintaining compatibility) the way
user-specified default applications are stored (as in, those for which
g_app_info_set_as_default_for_type() has been called.
We now store the default application for a content type in a new group
in the mimeapps.list keyfile, and "Added Associations" tracks only the
applications that have been added by the user, following a
most-recently-used first order.
This is useful in GtkAppChooser-like widgets to pre-select the last used
application when constructing a widget.
https://bugzilla.gnome.org/show_bug.cgi?id=636311
Hiding the object/class structs in the source file makes this class not
subclassable.
Move them to the public header, and add a property for the icon, so that
subclasses can just use
g_object_new (DERIVED_TYPE,
"gicon", icon,
NULL);
to create an emblemed icon.
https://bugzilla.gnome.org/show_bug.cgi?id=636892
The necessary review and integration work has not happened, and
we don't want to enshrine it in this unproven state.
It will be back when the world is ready for it.
Previously, the code only initialized the enumerator if the address
hadn't had cached addresses. But creating an enumerator cached the
addresses, so the second one failed to work.
Make the certificate and peer-certificate properties virtual, and add
peer-certificate-errors as well. Change the documentation on
peer-certificate to say that it's not set until after the handshake
succeeds (which means notify::peer-certificate can be used to tell
when a handshake has completed).
We were combining "allow un-notified closes" and "close without
notifying" into a single property, which meant that it was impossible
to "be liberal in what you accept and conservative in what you send".
Change require-close-notify to only be about the peer behavior, and
make our connections always close-notify properly when closing (while
noting that you can just close the base-io-stream directly if you want
to do an unclean close).
Trying to do this as a signal won't work well with either
GTlsCertificateDB (in which case looking up a certificate in the db is
a blocking/asynchronous act) or session resumption support (in which
case the certificate or lack thereof is part of the session definition
and so needs to be known immediately). Make the caller use
g_tls_connection_set_certificate() ahead of time (or when retrying)
instead.
Add a method to verify a certificate against a CA; this can be used
for apps that need to test against non-default CAs.
Also make the GTlsCertificate::issuer property virtual
