Add G_DBUS_ERROR codes for:
* org.freedesktop.DBus.Error.UnknownObject
* org.freedesktop.DBus.Error.UnknownInterface
* org.freedesktop.DBus.Error.UnknownProperty
* org.freedesktop.DBus.Error.PropertyReadOnly
These were discussed on the dbus mailing list
and introduced in the following libdbus commit:
2c34514620c4b79ea4ec71d1db583379138d01ac
https://bugzilla.gnome.org/show_bug.cgi?id=727900
g_tls_certificate_list_new_from_file() was supposed to ignore non-PEM
content, but it accidentally required that there not be anything after
the last certificate. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=727692
Make sure that the @ sign is inside the authority part before attempting
to parse the userinfo. We do this by checking if the @ sign comes before
any of the possible authority delimiters.
Add unit test to verify parsing of ftp://ftp.gnome.org/start?foo=bar@baz
https://bugzilla.gnome.org/show_bug.cgi?id=726040
Rather than having special code in gsocket.c, handle Winsock errors
along with other Win32 errors in gioerror.c
Also, reference g_win32_error_message() from the
g_io_error_from_win32_error() docs, and update the
g_win32_error_message() docs to clarify that it works with Winsock
error codes too.
Map EPROTONOSUPPORT, ESOCKTNOSUPPORT, EPFNOSUPPORT and EAFNOSUPPORT to
G_IO_ERROR_NOT_SUPPORTED in g_io_error_from_errno(). (GSocket's
socket_io_error_from_errno() already did this with the corresponding
Winsock errors.)
Also map EOPNOTSUPP, which on Linux is the same as ENOTSUP, but may
not be on other platforms.
Also, rewrite the EAGAIN/EWOULDBLOCK section to use the simpler idiom
used by EEXIST/ENOTEMPTY and (now) ENOTSUP/EOPNOTSUPP.
Use #GVariant instead of GVariant.
g_notification_add_button_with_target,
g_notification_set_default_action_and_target:
Replace 'format_string' with 'target_format'.
g_notification_set_default_action_and_target_value:
Remove paragraph that apparently had been accidentally copied from
g_notification_set_default_action_and_target.
https://bugzilla.gnome.org/show_bug.cgi?id=727123
In the event that a GSettings object is being destroyed just as a change
signal is being delivered, the destroying thread will race with the
dconf worker thread for acquiring the lock on the GSettingsBackend.
If the signalling thread gets there first then the destroying thread
will block on the lock. The signalling thread adds a reference to the
GSettings object that is being destroyed and releases the lock. The
idea is that this should prevent the GSettings object from being
destroyed and thus maintain its entry in the list. Unfortunately, the
weak reference notify function is already running and as soon as we
release the lock, the list entry is removed.
The signalling thread crashes.
This bug is indicative of a serious problem encountered in many
situations where GObject instances are touched from multiple threads.
Ideally, we will move to a place where g_object_ref() is not called at
all on the GSettings object from the dconf worker thread and instead, a
dispatch will be done without holding a reference (similar to how
GAppInfoMonitor presently works). This would also prevent the
unfortunate case of someone dropping what they assume to be the last
reference on a GSettings object, only to have an already-pending signal
delivered once they return to the mainloop, crashing their program.
Making this change for GSettings (with multiple instances per thread,
the possibility of multiple backends and each instance being interested
in different events) is going to be extremely non-trivial, so it's not a
change that makes sense at this point in the cycle.
For now, we can do a relatively small and isolated tweak so that we
never access the list except under a lock. We still perform the bad
pattern of acquiring a ref in a foreign thread which means that we still
risk delivering a signal to a GSettings object that the user has assumed
is dead (unless they explicitly disconnect their signal handler). This
is a problem that we already had, however.
https://bugzilla.gnome.org/show_bug.cgi?id=710367
Change the order of the arguments on the (internal) keys_changed callback in
GSettingsListenerVTable.
This means that all functions in the table now fit the following signature:
void (* f) (GObject *target,
GSettingsBackend *backend,
const gchar *name_or_path,
gpointer origin_tag,
const gchar * const *names);
allowing the possibility of arguments ignored at the end.
This allows us to simplify our dispatch-to-thread code in GSettingsBackend,
making it a bit less generic.
So far, this should be a straight refactor.
https://bugzilla.gnome.org/show_bug.cgi?id=710367
The _finish functions for GUnixVolume _mount and _eject functions were
never implemented, having been simply stubbed out as 'return TRUE;'.
Implement them.
https://bugzilla.gnome.org/show_bug.cgi?id=724916
The existing code is buggy and now that we have GSubprocess, we should just use
it instead, allowing for some substantial reduction in complexity.
https://bugzilla.gnome.org/show_bug.cgi?id=724916
As of e6af432, g_content_type_get_symbolic_icon() returns non-symbolic
fallbacks. Thus, we can't append another symbolic icon to the fallbacks.
The special case was a bit of a hack anyway. It was only applied to
themed icons and there was no generic fallback for mime types that are
not folders.
https://bugzilla.gnome.org/show_bug.cgi?id=726046
We need to have these in BUILT_SOURCES so that 'make' knows to generate them
before attempting to compile other .c files in the same directory (since some
of these files include the header).
Should fix up remaining issues about partial versions of this file being
included under parallel builds.
https://bugzilla.gnome.org/show_bug.cgi?id=725891
Add a test for GSubprocess to test setting, unsetting and inheritance of
environment variables. Use communicate() to give it a bit more of a
workout as well.
https://bugzilla.gnome.org/show_bug.cgi?id=725651
On the splice for stdout or stderr completing, GSubprocess calls
_slice_finish() to collect the result.
We assume that a zero return value here means failure, but in fact this
function returns a gssize -- the number of bytes transferred, or -1 for
an error.
This causes GSubprocess to mistakenly think that it has an error when it
actually just has an empty buffer (as would be the case when collecting
stderr from a successful command).
Check for -1 instead of FALSE to detect the error.
https://bugzilla.gnome.org/show_bug.cgi?id=724916
Add the basename from the first component of the Exec line to the list of
strings to search for via g_desktop_app_info_search().
We treat Exec as a fairly strong match -- just below the visible name.
Add a testcase to make sure everything is working OK.
https://bugzilla.gnome.org/show_bug.cgi?id=725023
Visual C++ is quite zealous about checking against the types used in the
initializing of array of structures, even up to Visual C++ 2013. Fix this
by splitting up the initializing steps.
https://bugzilla.gnome.org/show_bug.cgi?id=724609
There is no longer any code left in the check/prepare functions on UNIX,
so put %NULL in the GSourceFuncs vtable.
This also allows us to simplify some logic.
https://bugzilla.gnome.org/show_bug.cgi?id=724707
We are reusing the GPollFD.revents field of the source to store a
temporary value. Use a local variable for that instead.
This is a refactor to make the next commit easier to understand.
https://bugzilla.gnome.org/show_bug.cgi?id=724707
Now that GCancellable's GSource is based on _set_ready_time() instead of
an fd, we should use it as a child source, instead of forcing the
creation of the fd and adding it as a poll.
https://bugzilla.gnome.org/show_bug.cgi?id=724707
Windows does not come with inet_aton(), and this check on IPv4 addresses
is actually not needed on Windows as the getaddrinfo() implementation on
Windows already rejects non-standard and non-real IPv4 numbers-and-dots
addresses.
https://bugzilla.gnome.org/show_bug.cgi?id=724609
After getting an EINTR, g_socket_condition_timed_wait() has to adjust
its timeout, but it was trying to convert from nanoseconds to
microseconds by multiplying by 1000 rather than dividing... Oops.
https://bugzilla.gnome.org/show_bug.cgi?id=724239
There is a race condition in the makefile that can result in build failures like this in parallel builds:
| ./gdbus-test-codegen-generated.h:7:0: error: unterminated #ifndef
| #ifndef __GDBUS_TEST_CODEGEN_GENERATED_H__
This is because a rule like this:
x.c x.h: prerequisites
@commands
doesn't consider x.c and x.h together. Instead, it expands to two rules, one to
generate x.c and one to generate x.h, which happen to run the same commands. In
the worst case they execute in parallel, overwriting each other's output.
Signed-off-by: Ross Burton <ross.burton@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=723616
If a GSimpleAsyncResult has a NULL source tag, allow it to compare
valid to a non-NULL source tag in g_simple_async_result_is_valid(), to
simplify cases where, eg, g_simple_async_result_new() and
g_simple_async_result_report_error_in_idle() are both used.
https://bugzilla.gnome.org/show_bug.cgi?id=721458
We have a configure.ac check for lib.exe that attempts to enable
creation of .lib files for our 5 public libraries. That has been broken
for a long time for two reasons:
1) the Makefiles hardcode 'lib' instead of 'lib.exe'
2) we dropped generation of .def files quite some time ago (except for
in gthread where we have the two-symbol file under version control)
Add new rules for creating .def files from dumpbin.exe (which you should
have if you have lib.exe) and fix the .lib rules to use lib.exe.
Add a bit of $(AM_V_GEN) all around, as well.
https://bugzilla.gnome.org/show_bug.cgi?id=722033
In addition to the standard "192.168.1.1" format, there are numerous
legacy IPv4 address formats (such as "192.168.257",
"0xc0.0xa8.0x01.0x01", "0300.0250.0001.0001", "3232235777", and
"0xc0a80101"). However, none of these forms are ever used any more
except in phishing attempts. GLib wasn't supposed to be accepting
these addresses (neither g_hostname_is_ip_address() nor
g_inet_address_new_from_string() recognizes them), but getaddrinfo()
accepts them, and so the parts of gio that use getaddrinfo()
accidentally did accept those formats.
Fix GNetworkAddress and GResolver to reject these address formats.
https://bugzilla.gnome.org/show_bug.cgi?id=679957
Windows needs a special inefficient hack to implement
g_socket_get_available() correctly for UDP sockets, but that hack
isn't needed for TCP, and in fact, might give the wrong answer in that
case. Fix it to only use the hack with UDP.
Also, fix that case to handle non-blocking sockets as well.
And add a test case for g_socket_get_available() with TCP.
https://bugzilla.gnome.org/show_bug.cgi?id=723422
Since we are no longer using sgml mode, using /* */ to
escape block comments inside examples does not work anymore.
Switch to using line comments with //
Our check for inotify_init1() being defined is broken. We happily
declare that inotify is supported, even if the check fails.
This was originally intended to check for inotify_init1 in the libc so
that we could fall back to inotify_init if it was not yet defined.
FreeBSD has a libinotify that emulates the inotify API via kqueue. It
installs a <sys/inotify.h> header and requires linking to -linotify. We
don't want to falsely detect working inotify in this case.
Treat the lack of inotify_init1() in the libc as a lack of inotify
support. This requires only a new libc -- we still support old kernels:
in the case that inotify1_init() fails, we fall back to inotify_init().
https://bugzilla.gnome.org/show_bug.cgi?id=724330
It’s not enough to close a connection by calling g_input_stream_close()
and g_output_stream_close() on its two substreams: to close the
underlying socket, one must use g_io_stream_close(). Document that.
https://bugzilla.gnome.org/show_bug.cgi?id=724278
Since all element markup is now gone from the doc comments,
we can turn off the gtk-doc sgml mode, which means that from
now on, docbook markup is no longer allowed in doc comments.
To make this possible, we have to replace all remaining
entities in doc comments by their replacement text, & -> &
and so on.
Add support for parsing command line options with GApplication.
You can add GOptionGroup and GOptionEntry using two new APIs:
g_application_add_option_group() and
g_application_add_main_option_entries().
Also add a "handle-local-options" signal that allows handling of
commandline arguments in the local process without having to override
local_command_line.
As a special feature, you can have a %NULL @arg_data in a GOptionEntry
which will cause the argument to be stored in a GVariantDict. This
dictionary is available for inspection and modification by the
"handle-local-options" signal and can be forwarded to the primary
instance in cases of command line invocation (where it can be fetched
using g_application_command_line_get_options()).
https://bugzilla.gnome.org/show_bug.cgi?id=721977
In some virtualization setups, ifindexes can end up becoming very
large, and so the existing code that assumes that *some* interface
must have an index less than 255 fails.
Fix this by explicitly looking for "lo" first. And then if that fails
(on Windows, or other systems where the loopback interface is not
called "lo"), try indexes up to 1024 rather than 255.
https://bugzilla.gnome.org/show_bug.cgi?id=723048
For some reason, IPv6 link-local multicast routing changes all the
time. GNetworkMonitorBase was already ignoring them for purposes of
emitting network-changed, but GNetworkMonitorNetlink would still
trigger a re-dump after getting one, so network-changed would end up
getting emitted anyway.
glocalfile.c: In function 'g_local_file_measure_size_of_file':
glocalfile.c:2654:3: warning: passing argument 2 of 'g_lstat' from
incompatible pointer type [enabled by default]
if (g_lstat (name->data, &buf) != 0)
^
In file included from glocalfile.c:68:0:
../glib/gstdio.h:135:5: note: expected 'struct GStatBuf *' but argument
is of type 'struct _stati64 *'
https://bugzilla.gnome.org/show_bug.cgi?id=711547
gdbusauthmechanismexternal.c: In function 'mechanism_client_initiate':
gdbusauthmechanismexternal.c:355:3: warning: 'initial_response' may be
used uninitialized in this function [-Wmaybe-uninitialized]
return initial_response;
^
gdbusauthmechanismexternal.c:332:10: note: 'initial_response' was
declared here
https://bugzilla.gnome.org/show_bug.cgi?id=711547
glocalfileinfo.c: In function '_g_local_file_info_get':
glocalfileinfo.c:1955:11: warning: passing argument 3 of
'get_thumbnail_attributes' from incompatible pointer type [enabled by
default]
get_thumbnail_attributes (path, info, &statbuf);
^
glocalfileinfo.c:1285:1: note: expected 'const struct GStatBuf *' but
argument is of type 'struct _stati64 *'
get_thumbnail_attributes (const char *path,
https://bugzilla.gnome.org/show_bug.cgi?id=711547
If the action is stateful and the user doesn't have their own activate handler
then do some reasonable things for ourselves.
After a lot of experience using stateful GSimpleAction it turns out that
people almost always end up using it in the same ways:
A boolean-typed stateful action with no parameter is most likely going
to want to be toggled. Any other type of action that has the parameter
type equal to the state type probably intends for activation to
represent a request to change the state.
This patch implements those two cases. This will let people stop
writing their own trivial handlers over and over.
https://bugzilla.gnome.org/show_bug.cgi?id=722503
Clarify in the documentation that the commandline arguments passed
around by GApplication (to local_command_line and returned via
g_application_command_line_get_arguments()) are in the GLib filename
encoding (ie: UTF-8) on Windows, not the system code page.
Fix the mismatch that would result from having argv passed to
g_application_run() in main() on Windows (where it is in the system
code page) by ignoring argc/argv on Windows and calling
g_win32_get_command_line() for ourselves. Document this.
This might be a slight API break on Windows: we documented that it was
possible to call g_application_run() with arguments other than argc/argv
and now doing that will result in those arguments being ignored. It has
always been recommended practice to only call g_application_run() from
main() directly, however, and all of our code examples have shown only
this. We will see if this causes any issues and consider reevaluating
the situation if so.
https://bugzilla.gnome.org/show_bug.cgi?id=722025
Add a note to the documentation for g_file_new_for_commandline_arg()
that this function is intended to operate on strings already in the GLib
filename encoding on Windows.
This has been the case for a long time, but this documents the
requirement.
https://bugzilla.gnome.org/show_bug.cgi?id=722025
g_strconcat() allocates memory, it needs to be freed.
==10653== 1,400 bytes in 50 blocks are definitely lost in loss record
1,838 of 1,851
==10653== at 0x4A0645D: malloc (in
/usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==10653== by 0x54ACB22: g_malloc (gmem.c:102)
==10653== by 0x54ACE4D: g_malloc_n (gmem.c:343)
==10653== by 0x54C8463: g_strconcat (gstrfuncs.c:589)
==10653== by 0x4D6ED38: get_xattrs_from_fd (glocalfileinfo.c:660)
==10653== by 0x4D71622:
_g_local_file_info_get_from_fd (glocalfileinfo.c:2028)
==10653== by 0x4D731A0:
g_local_file_input_stream_query_info (glocalfileinputstream.c:356)
==10653== by 0x4C996D8:
g_file_input_stream_query_info (gfileinputstream.c:148)
==10653== by 0x4C863F6: file_copy_fallback (gfile.c:3120)
==10653== by 0x4C86DD2: g_file_copy (gfile.c:3398)
https://bugzilla.gnome.org/show_bug.cgi?id=722357
The default local_command_line handler has a fast return path for the
case that we handle the commandline by forwarding it to the primary
instance, but this doesn't account for the fact that we may want to
become a service.
Allow for this by making sure we don't take the fast path of the service
flag is set.
Add a --gapplication-service switch to the default implementation of
local_command_line. This name is unlikely to clash with any option used
by an existing application.
When a normal application (neither service nor launcher) is launched with
exactly this one argument, G_APPLICATION_IS_SERVICE will be set.
The idea is that people will write their D-Bus service file with
--gapplication-service on the Exec line. This provides a nice
compromise for people who want the benefits of DBusActivatable
applications but without losing the ability to easily run them directly
(under the debugger or inside jhbuild, etc.)
https://bugzilla.gnome.org/show_bug.cgi?id=710965
Make sure we escape any special characters that are found in annotation
names or values to avoid emitting a malformed XML document in response
to an Introspect call.
https://bugzilla.gnome.org/show_bug.cgi?id=721796
The file extension of the GIO module could be something other than .so,
depending on platform. Use G_MODULE_SUFFIX so that the test will run
correctly on non-*nix platforms, such as Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=719344
If installed tests are not enabled, installed_testdir is not
defined, so we end up trying to create /modules and to chmod
things in /x-content/, which is not right.
When losing the D-Bus connection, we would write to stdout about it just
before killing ourselves with SIGTERM. We're a library, so we should
probably use stderr instead.
https://bugzilla.gnome.org/show_bug.cgi?id=721324
Part of the purpose of g_settings_get_child() was that it could be used
after you delay() a GSettings object, and then apply() all of the
settings together. In order for that to work, we need to share the
backend.
https://bugzilla.gnome.org/show_bug.cgi?id=720891
The x-content/win32-software type is only recognized if
the autorun.exe file is executable. Since the file is installed
as data, we need to fix up its permissions in an
install-data-hook.
This test is inspired by its namesake in GTK+. We instantiate
all types, and check the default values of their properties,
with some exceptions for types that are known not to work.
In case an object is already monitored, we lock then return without
unlocking it which can then result in a self deadlock. So properly
unlock before returning.
https://bugzilla.gnome.org/show_bug.cgi?id=721074
Use g_variant_parse_error_print_context() to format the error message
from the GVariant parser.
There is a slightly dubious interaction with the "parse me harder"
functionality here. We're probably going to have to deal with that
separately.
https://bugzilla.gnome.org/show_bug.cgi?id=715028
I recently had to track down why these tests failed. Turned
out that some rogue package on my system had installed mime
types that declared all files with 3 letter names to be
'chemical/x-turbomole-vibrational'.
This change will make it more obvious what is going on by
mentioning the mime types in the assertion message.
When replacing a version of goa-daemon (from gnome-online-accounts)
by a newer version with some added interfaces, evolution-data-server
and the gvfs-goa volume monitor might crash as there's no interface
definition for this new interface.
Work-around this by returning earlier from the _notify() implementation,
rather than accessing invalid memory.
https://bugzilla.gnome.org/show_bug.cgi?id=720539
Add missing (allow-none) annotations to
g_desktop_app_info_launch_uris_as_manager(). Tested with
python -c "from gi.repository import GLib, Gio; Gio.DesktopAppInfo.new('gcalctool.desktop').launch_uris_as_manager([], None, GLib.SpawnFlags.SEARCH_PATH|GLib.SpawnFlags.STDOUT_TO_DEV_NULL, None, None, None, None)"
which is necessary to do a launch_uris() without leaking stdout.
https://launchpad.net/bugs/1259721
GDBusConnection cleanup is inherently racy due to its use of worker
threads. Put tests that expect a NULL G_BUS_TYPE_SESSION singleton
as the first tests to work around cleanup races.
https://bugzilla.gnome.org/show_bug.cgi?id=719837
Allow only format strings that copy all values (i.e, don't contain '&'),
as the returned pointers might become invalid in some rare cases.
Since this is technically an API break, this patch only prints a
critical when a faulty format string is detected, but still fetches the
values.
https://bugzilla.gnome.org/show_bug.cgi?id=719979
Usually async methods copy/ref its arguments so caller can
forget about them. g_file_replace_contents_async() and
g_output_stream_write_async() are exceptions.
https://bugzilla.gnome.org/show_bug.cgi?id=690525
The desktop-files directory contains a mimeapps.cache file
that was not installed as data for installed tests, causing
the file measure test to fail only in when installed.
Make the testcase compare the byte size to what is reported
by du. Also add a test for the async api, and mak eit test
the progress reporting callback.
Comparing the code generated for the setter and other methods without
(real) return value, I noticed that the setter does not unref the
gvariant it gets.
https://bugzilla.gnome.org/show_bug.cgi?id=719472
This function turns a varargs argument list into a string array,
but forgets to NULL-terminate it. This function was not covered
by unit tests...so it was broken.
The test reveals that there's something fishy with this monitor.
One has to call g_app_info_get_all() for it to start working,
and then it only works once.
The previous patch to simplify the GSettings commandline tool by making
more use of global variables went a bit too far and broke 'gsettings
monitor' when used without a specific key.
Fix that up again.
The static analyser (correctly) considers a type check to fail if the
variable is NULL. In this case, the address must be non-NULL as no error
was thrown by g_socket_connection_get_remote_address(), but the static
analyser doesn’t know this.
Add a non-NULL assertion anyway, both to shut the analyser up, and
because it’s good extra testing.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
These prevent some false positives from the static analyser which are
caused by it not inspecting the invariants of
g_subprocess_communicate[_utf8]_finish() (i.e. that stdout and
stdout_str will always be set unless an error was returned).
They’re also good testing anyway.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
If the initial part of the header (‘MIME-TreeMagic’) is valid, but the
following line does not start with ‘[’ (i.e. is not a valid section
line), insert_matchlet() will be called with a NULL match pointer, and
will crash with a NULL pointer dereference.
Fix this by bailing out if a valid section line isn’t encountered before
the first insert_matchlet() call (i.e. between the header line and the
first data line).
Note that this has not been tested against a real treemagic file; the
fix is purely theoretical.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
In the case that (n_fds == 0 && fds == NULL), memcpy() would be called
against a NULL src pointer. Even though the number of bytes to copy is
0, avoid the possibility of a crash by only calling if fds is non-NULL.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
The static analyser will check dynamic type assertions and assume that
if they fail, the variable can either have the wrong type, or be NULL
(which is correct). The analyser doesn’t know that other constraints in
the API ensure the variable is non-NULL.
Add a non-null assertion to help the static analyser and shut it up in
this case.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
This can happen if the hash table lookup for ‘noncefile’ fails, and
hence the first ‘goto out’ is hit, at which point resolver is still
NULL.
Found with scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
Be a little bit more careful in regards to initializing a primitive type
variable before passing it by reference, as it could have random stuff
in the variable's address depending on the CRT, such as MSVCR110.DLL,
causing random, invalid stuff being written in that address.
This will fix this test when built with Visual Studio 2012.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
G_OS #ifdefs are only available once glibconfig.h has been
evaluated ; that is, after including glib headers.
Move this block down so it gets correctly evaluated.
Make it possible to skip the terminal-launching test simply
by setting DISPLAY= . Previously, you had to unset DISPLAY,
which is a little more cumbersome.
https://bugzilla.gnome.org/show_bug.cgi?id=711178
One testcase was launching appinfo-test from a GAppInfo that
does not have a filename. In this case, the G_LAUNCHED_DESKTOP_FILE
envvar is not exported. Make appinfo-test deal with that, without
spewing warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=711178
The actions test tests the GSimpleActionGroup API. Maybe this
should be moved to use GActionMap, but for now, just disable
the deprecations.
There was also one test that wasn't actually hooked up, so
do that as well.
Most _list_schemas() uses were to check for the availability
of a particular schema. g_settings_schema_source_lookup() is
a better way to do this.
https://bugzilla.gnome.org/show_bug.cgi?id=712315
In Windows development environments that have it, <unistd.h> is mostly
just a wrapper around several other native headers (in particular,
<io.h>, which contains read(), close(), etc, and <process.h>, which
contains getpid()). But given that some Windows dev environments don't
have <unistd.h>, everything that uses those functions on Windows
already needed to include the correct Windows header as well, and so
there is never any point to including <unistd.h> on Windows.
Also, remove some <unistd.h> includes (and a few others) that were
unnecessary even on unix.
https://bugzilla.gnome.org/show_bug.cgi?id=710519
Assume unix platforms support the original POSIX.1 standard.
Specifically, assume that if G_OS_UNIX, then we have chown(),
getcwd(), getgrgid(), getpwuid(), link(), <grp.h>, <pwd.h>,
<sys/types.h>, <sys/uio.h>, <sys/wait.h>, and <unistd.h>.
Additionally, since all versions of Windows that we care about also
have <sys/types.h>, we can remove HAVE_SYS_TYPES_H checks everywhere.
Also remove one include of <sys/times.h>, and the corresponding
configure check, since the include is not currently needed (and may
always have just been a typo for <sys/time.h>).
https://bugzilla.gnome.org/show_bug.cgi?id=710519
Assume all supported platforms implement C90, and therefore they
(correctly) implement atexit(), memmove(), setlocale(), strerror(),
and vprintf(), and have <float.h> and <limits.h>.
(Also remove the configure check testing that "do ... while (0)" works
correctly; the non-do/while-based version of G_STMT_START and
G_STMT_END was removed years ago, but the check remained. Also, remove
some checks that configure.ac claimed were needed for libcharset, but
aren't actually used.)
Note that removing the g_memmove() function is not an ABI break even
on systems where g_memmove() was previously not a macro, because it
was never marked GLIB_AVAILABLE_IN_ALL or listed in glib.symbols, so
it would have been glib-internal since 2004.
https://bugzilla.gnome.org/show_bug.cgi?id=710519
My application (hotssh) would like to get the resolved address from DNS,
before we start the connect().
We could add a new event, but it's easy enough to just cache it on the
GSocketConnection; this avoids any new API.
https://bugzilla.gnome.org/show_bug.cgi?id=712547
It makes sense to match on GenericName in case an application does
not provide any keywords, but the Keywords field has been added
to explicitly support the search case, while GenericName was used
to be displayed in menus, so it makes more sense to consider
Keywords more (or equally) relevant for search.
https://bugzilla.gnome.org/show_bug.cgi?id=711640
Just copy the schemas to the builddir and compile them in place instead
of trying to mess around with creating the compiled file in a different
dir. This solves issues in the summary/description testcase when
GSettings expects the usual situation of having the .xml files present
in the same directory.
We need to check for the correct line endings on Windows (\r\n) for the
echo tests and currently need to skip the test_echo_eof test there, as
it depends on the cat utility that is not normally found on Windows, and
using an external installation of cat via MSYS or Cygwin would render the
test program to hang as cat waits for user input.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
Various tests were depending on local_error being set by a callback
when it could never have been the case. Simplify async error detection
logic in those cases, and fix leak of GError.
https://bugzilla.gnome.org/show_bug.cgi?id=711802
We had a GApplication testcase that handled both open and commandline.
This only way that this worked was by implementing the commandline
handler without actually setting the HANDLES_COMMAND_LINE flag.
This behaviour is now invalid, so just rip out the offending part of the
test.
https://bugzilla.gnome.org/show_bug.cgi?id=711099
The first time this function is called we load all of the keyfiles in
the directory, ignoring the 'Hidden' ones and build an index out of the
interesting fields using g_str_tokenize_and_fold().
We do prefix matching on the tokens to find relevent desktop files.
Right now this is implemented as a hashtable that we iterate over,
checking prefixes on each token. This could possibly be sped up by
creating an array, but it's already pretty fast...
https://bugzilla.gnome.org/show_bug.cgi?id=711557
...so that the generated code will build on all platforms, as compilers
like Visual C++ does not like #ifdef checks during a definition/use of
a macro.
https://bugzilla.gnome.org/show_bug.cgi?id=711049
In each DesktopFileDir, store a list of desktop files for that
directory. This speeds up opening desktop files by name because we can
skip statting in directories that we know don't have the file and also
speeds up _get_all() because we can avoid enumeration.
This also improves our support for dealing with names like
'kde4/kate.desktop' (equivalent to kde4-kate.desktop) since we find out
about all of these files are the start and don't need to guess about
which '-' to change to a '/'. It also means that we can easily deal
with more than one level of such prefixes.
We use a file monitor to watch for changes, invalidating our lists when
we notice them.
https://bugzilla.gnome.org/show_bug.cgi?id=711520
Include unistd.h only on *NIX and define items as necessary on Windows,
also replace instances of ssize_t with the GLib-equivilant gssize so to fix
the build on platforms that do not have ssize_t, such as Visual C++.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
We need to use g_content_type_get_mime_type() to look up the mime type of
the file from the registry on the content type that was acquired on
Windows, as g_file_info_get_content_type() does not acquire the
file mime type (unlike on *NIX).
g_content_type_get_mime_type() on *NIX is more or less an no-op as it
simply returns the g_strdup()-ed version of the passed-in content type.
This will enable the resources test to pass on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
The overridden implementation of the skip method for
GLocalFileInputStream allows skipping past the end of the file which is
inconsistent with the documentation. Prevent this by first seeking to
the end of the file and then seeking backwards from there as much as
is necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=711048
If the goal is to make sure we don't have a dbus connection, it has
to call g_test_dbus_unset() instead which is much more complete.
In this case, g_test_dbus_unset() is called already, so it should be
fine.
https://bugzilla.gnome.org/show_bug.cgi?id=697348
This is to avoid having again the subtil bug in dbus-appinfo.c:
session_bus_down() was called before g_test_run() so the test was
running on the user's dbus session.
https://bugzilla.gnome.org/show_bug.cgi?id=697348
A reference to the session bus is now stored in GNotificationBackend.
Remove the extraneous one in the gtk backend and stop using it in
withdraw_notification.
https://bugzilla.gnome.org/show_bug.cgi?id=711051
Don't hold the lock when calling the user's callback during
g_cancellable_connect() for the case that the cancellable has already
fired.
Taken from a patch by Alex Larsson.
Doc updates from Colin Walters.
https://bugzilla.gnome.org/show_bug.cgi?id=705395
If someone calls org.gtk.Actions.Describe on a non-existent action then
return an exception instead of a trivial description (disabled, no
state, etc.).
https://bugzilla.gnome.org/show_bug.cgi?id=687185
If someone calls org.gtk.Actions.Describe on a non-existent action then
return an exception instead of a trivial description (disabled, no
state, etc.).
https://bugzilla.gnome.org/show_bug.cgi?id=687185
g_object_set() allowed us to bypass the usual checks that the state
doesn't change type and also leaked.
Fix that up by turning the state into a construct property (so that it
always gets set once during construction, even if only to NULL) and
then route the further sets through the C API so that they are subject
to the same checks.
https://bugzilla.gnome.org/show_bug.cgi?id=696424
Ignore qualified (in the XML namespace sense) tags and attributes when
compiling GSettings schemas.
This will allow people to add custom tags and attributes to their schemas
without tripping up the compiler.
https://bugzilla.gnome.org/show_bug.cgi?id=635641
Ignore qualified (in the XML namespace sense) tags and attributes when
parsing D-Bus introspection XML.
This will allow people to add custom tags and attributes to their D-Bus
interfaces without tripping up GDBus.
https://bugzilla.gnome.org/show_bug.cgi?id=665634
Stop using the recently-deprecated GSettings APIs.
Use the GSettingsSchema-based APIs instead.
This fixes a number of bugs and also a net reduction of code. In
particular, list-schemas will now work in context of a given --schemadir
argument.
https://bugzilla.gnome.org/show_bug.cgi?id=695558
The number of arguments passed to each function is about to increase, so
just use global variables instead.
This is a commandline tool, after all...
https://bugzilla.gnome.org/show_bug.cgi?id=695558
Add g_settings_schema_has_key() and _get_range(), _range_check(),
_get_value_type(), _get_default_value() methods on GSettingsSchemaKey.
Deprecate the equivalent APIs on GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=683017
Add two new APIs: g_settings_get_user_value() and
g_settings_get_default_value(). Together, these should allow the
inspection of all interesting cases of "is this key set?" and "what
would happen if I reset this key?"
https://bugzilla.gnome.org/show_bug.cgi?id=668233
Add two boolean parameters to our internal getter utility function in
anticipation of the coming addition of g_settings_get_user_value() and
g_settings_get_default_value() APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=668233
This will get the 'user' value from the database (ie: the one that the user has
control over).
Provide a default implementation that chains to ->read(). That will work for
all of our internal backends which don't have a concept of layering or
lockdown.
The delayed backend implments "user value" by returning anything that's
in the changeset (incuding an explicit NULL) or chaining up otherwise.
We will use this for g_settings_get_user_value().
https://bugzilla.gnome.org/show_bug.cgi?id=668233
The G_ADD_PRIVATE() macro, and the auto-generated get_instance_private()
internal function, should be used conditionally depending on the maximum
allowed version of GLib, as defined by the GLIB_VERSION_MAX_ALLOWED
pre-processor symbol.
This allows generating code that can be compiled in projects that wish
to use an older API version of GLib through the use of the
GLIB_VERSION_MAX_ALLOWED symbol.
https://bugzilla.gnome.org/show_bug.cgi?id=710133
Prevent a crash in the case that gvdb_table_list() returns NULL (ie:
because a schema has no keys).
Stop a memory leak caused by pointlessly stealing keys from a hashtable
(after we quarked them already).
Stop allocating an extra entry at the end of an array for a terminator
(that we never wrote anyway) when all functions using this API refer to
the out-parameter length array.
https://bugzilla.gnome.org/show_bug.cgi?id=711016
Ignore the keyfile being deleted (ie: by the user) instead of reporting
it to the application as all values being reverted back to their
originals.
https://bugzilla.gnome.org/show_bug.cgi?id=637956
Support the 'extends' attribute that has been supported by the compiler
for a long time by doing three things:
- when creating a schema that extends another schema, lookup that other
schema
- when looking up keys and we can't find them in the schema, check
(recursively) in the 'extends' schema
- when listing all keys in a schema, also visit the extends schemas,
but take care to avoid duplicates caused by overrides
Extend the testsuite to verify that it works.
https://bugzilla.gnome.org/show_bug.cgi?id=645453
g_settings_list_schemas() and g_settings_list_relocatable_schemas() are
now deprecated.
This will allow listing off schemas on non-default sources and is a
better fit with the new direction the API is going.
https://bugzilla.gnome.org/show_bug.cgi?id=680838
Add an API to read the summary and description from the .xml schema
files.
This will be used by dconf-editor and gnome-tweak-tool.
This API is a bit heavy -- it parses the XML and builds a table. It
also loads gettext domains for translation. It only does these things
if it is used, however, so it will not impact normal applications.
We store the summary/description in a pair of hash tables on the schema
source (which we have a backref to as of a few commits ago). We can't
use a global table because people might want to request summary and
description from non-default sources. We don't want to use per-schema
tables because we'd have to reparse the directory every time (since we
cannot guess which file a schema may have been in).
https://bugzilla.gnome.org/show_bug.cgi?id=668232
Take this private API and make it public along with a boxed type and
ref/unref functions.
Future commits will add accessors with new functionality and some that
allow us to deprecate functions on GSettings itself (such as
g_settings_get_range).
https://bugzilla.gnome.org/show_bug.cgi?id=668232
The way we created the global schema list predates
g_settings_schema_source_new_from_directory() and therefore doesn't use
it.
Update it to use that function, removing some code.
https://bugzilla.gnome.org/show_bug.cgi?id=668232
If a broken (or malicious) remote client calls Open or CommandLine
on a GApplication that does not implement those, return a DBus
error instead of going through and then emitting a warning.
https://bugzilla.gnome.org/show_bug.cgi?id=710885
This code was added for use by the G_FILE_ATTRIBUTE_THUMBNAIL_IS_VALID
file attribute, but may end up being used elsewhere (e.g. in GVfs) as well.
As it’s dealing with untrusted external files, and the non-trivial PNG file
format, this commit adds several test cases to cover valid and invalid PNG
files.
The security model for the thumbnail verification code is that the user’s
cache directory is untrusted, and potentially any PNG file which is passed
to the verifier has been manipulated arbitrarily by an attacker.
This is a follow-up to commit fe7069749f.
https://bugzilla.gnome.org/show_bug.cgi?id=709898
This indicates whether the thumbnail (given by G_FILE_ATTRIBUTE_THUMBNAIL_PATH)
is valid — i.e. to represent the file in its current state. If
G_FILE_ATTRIBUTE_THUMBNAIL_IS_VALID is FALSE (for a normal _or_ failed
thumbnail) it means the file has changed since the thumbnail was generated, and
the thumbnail is out of date.
Part of checking thumbnail validity (by the spec) involves parsing
headers out of the thumbnail .png so we include some (small) code to do
that in a separate file. We will likely want to copy this code to gvfs
to do the same for GVfsFile.
Heavily based on a patch from Philip Withnall <philip.withnall@collabora.co.uk>
who suggested the feature and designed the API.
https://bugzilla.gnome.org/show_bug.cgi?id=709898
It is our intention that memory output streams should operate in two
distinct modes, depending on if a realloc function was provided or not.
In the case that we have a realloc function (resizable mode), we want
the stream to behave as if it were a file that started out empty. In
the case that we don't have a realloc function (fixed-sized mode), we
want the stream to behave as a block device would.
To this end, we introduce two changes in functionality:
- seeking to SEEK_END on a resizable stream will now seek to the end of
the valid data region, not to the end of the allocated memory (which
is really just an implementation detail)
- seeks past the end of the allocated memory size are now permitted,
but only on resizable streams. The next write will grow the buffer
(inserting zeros between).
Some tweaks to testcases were required in order not to break the build,
which indicates that this is an API break, but it seems unlikely that
anyone will be effected by these changes 'in the real world'.
Updates to documentation and further testcases are in following commits.
Based on a patch from Maciej Piechotka <uzytkownik2@gmail.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=684842
Introduce the concept of "fixed" vs. "resizable" streams and document
how g_seekable_seek() works for each case.
We don't include g_seekable_is_fixed_size() at this point because we
don't know if anyone would require it. This may appear in the future if
someone asks for it, however.
https://bugzilla.gnome.org/show_bug.cgi?id=684842
D-Bus versions < 1.6.18 (i.e. all current versions) have a bug with the
path_namespace='/' match rule key. It should conceptually match everything,
but actually matches nothing. This results in no property change (or other)
signals being forwarded to the D-Bus client.
The work-around implemented in GDBusObjectManagerClient is to remove the
path_namespace match key if its value is ‘/’.
For the upstream D-Bus bug, see:
https://bugs.freedesktop.org/show_bug.cgi?id=70799https://bugzilla.gnome.org/show_bug.cgi?id=710726
Move a method from GNotificationBackend into the fdo backend (since it
was only used from here). Remove the accessors for the already-public
(in private header) ->dbus_connect and ->application on
GNotificationBackend.
https://bugzilla.gnome.org/show_bug.cgi?id=688492
g_buffered_input_stream_finalize() is already declared as static in this
gbufferedinputstream.c file, so just remove the redundant declaration.
Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
https://bugzilla.gnome.org/show_bug.cgi?id=710345
Replaced several usages of GError with g_return_val_if_fail() for
developer-only messages. As additional value, it also removes those
messages from the list to translate, simplifying translator's work a
bit.
https://bugzilla.gnome.org/show_bug.cgi?id=569017
Over many years of writing code interacting with subprocesses, a pattern
that comes up a lot is to run a child and get its output as UTF-8, to
put inside a JSON document or render in a GtkTextBuffer, etc.
It's very important to validate at the boundaries, and not say deep
inside Pango.
We could do this a bit more efficiently if done in a streaming fashion,
but realistically this should be OK for now.
We weren't closing the streams after we were done reading or writing,
which is kind of essential. The easy way to fix this is to just use
g_output_stream_splice() to a GMemoryOutputStream rather than
hand-rolling it. This results in a substantial reduction of code
complexity.
A second serious issue is that we were marking the task as complete when
the process exits, but that's racy - there could still be data to read
from stdout. Fix this by just refcounting outstanding operations.
This code, not surprisingly, looks a lot like the "multi" test.
Next, because processes output binary data, I'd be forced to annotate
the char*/length pairs as (array) (element-type uint8). But rather than
doing that, it's *far* simpler to just use GBytes.
We need a version of this that actually validates as UTF-8, that will be
in the next patch.
There are a number of nice things this class brings:
0) Has a race-free termination API on all platforms (on UNIX, calls to
kill() and waitpid() are coordinated as not to cause problems).
1) Operates in terms of G{Input,Output}Stream, not file descriptors
2) Standard GIO-style async API for wait() with cancellation
3) Makes some simple cases easy, like synchronously spawning a
process with an argument list
4) Makes hard cases possible, like asynchronously running a process
with stdout/stderr merged, output directly to a file path
Much rewriting and code review from Ryan Lortie <desrt@desrt.ca>
https://bugzilla.gnome.org/show_bug.cgi?id=672102
This is essentially a commandline implementation of the client-side of
the org.freedesktop.Application D-Bus interface.
It includes support for tab-completion based on desktop files and their
contents.
https://bugzilla.gnome.org/show_bug.cgi?id=704218
The GApplicationCommandLine DBus implementation currently calls
g_dbus_method_invocation_return_value() in its finalize() implementation
only, relying on the object being destroyed after g_object_unref() is
called on it inside g_application_impl_method_call().
While this is usually fine for C applications, when overriding the
command_line vfunc from language bindings, the binding might add extra
references to the object, which might not be released immediately - e.g.
because they're garbage collected, or possibly even leaked. The same
scenario could happen in a C application that decides to keep a
reference to the passed-in GApplicationCommandLine object.
To ensure the CommandLine DBus method always gets a reply after the
invocation of command_line in the primary instance, explicitly send the
message back before dropping our reference to the object.
https://bugzilla.gnome.org/show_bug.cgi?id=708042
It's not difficult to do; not all backends implement it, and for some
it may be difficult to implement query_info_on_read(), so let's just
do both.
https://bugzilla.gnome.org/show_bug.cgi?id=706254
Since it could confuse callers (admittedly who are already violating
a precondition).
Just spotted while adapting some bits of this code for a ssh library.
This commit factors out a function for comparing string suffixes, and at
the same time makes it safe for mime types that are shorter than the
"/*" suffix.
==25418== Invalid read of size 1
==25418== at 0x3C6D0F9D22: __gio_xdg_cache_mime_type_subclass (xdgmimecache.c:848)
==25418== by 0x3C6D09ED8C: g_content_type_is_a (gcontenttype.c:158)
==25418== by 0x34D8031E95: gtk_recent_filter_filter (gtkrecentfilter.c:733)
==25418== by 0x34D802F167: _gtk_recent_chooser_get_items (gtkrecentchooserutils.c:387)
==25418== by 0x34D802D07F: idle_populate_func (gtkrecentchoosermenu.c:1011)
==25418== by 0x34D7A20477: gdk_threads_dispatch (gdk.c:804)
==25418== by 0x3C6C0492F5: g_main_context_dispatch (gmain.c:3065)
==25418== by 0x3C6C049677: g_main_context_iterate.isra.23 (gmain.c:3712)
==25418== by 0x3C6C04972B: g_main_context_iteration (gmain.c:3773)
==25418== by 0x34D7FC2AF4: gtk_main_iteration (gtkmain.c:1262)
==25418== by 0x408EB4: main (in /usr/bin/glade)
https://bugzilla.gnome.org/show_bug.cgi?id=708529
Rather than having lots of obscure platform-based #ifdefs all over
gio, define some macros in gcredentialsprivate.h, and use those to
simplify the rest of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=701482
Sometimes the application doesn't want to autostart a service
when it creates a proxy, but wants the service autostarted when
it makes the first method call. Allow that behavior with a new
flag.
https://bugzilla.gnome.org/show_bug.cgi?id=708828
Fix up a lot of whitespace issues in this file since we're about to do
some pretty serious rewriting here anyway...
Add some fold markers while we're at it.
Change the search path to be a global array of 'DesktopFileDir' structures and
change the 'get' function to an 'ensure' function.
This is just a straight-up refactor. Future patches will expand the
DesktopFileDir structure.
Add a convenient and race-free method of watching local files from the
GLib worker thread.
Without this, the race-free way to create a monitor that dispatches
events to the worker thread looked something like this:
- dispatch an idle to the worker thread
- from the idle, create the monitor and connect signals
- from the original thread, wait (on a cond?) until the worker thread
has finished setting up the monitor
- read the file that you were monitoring
which is just ridiculously complicated...
To use the new API:
monitor = g_local_file_monitor_new_in_worker ("/path/to/some/file",
G_FILE_MONITOR_NONE,
&error);
g_assert_no_error (error);
g_signal_connect (monitor, "changed", G_CALLBACK (callback), NULL);
g_local_file_monitor_start (monitor);
'callback' will run from the GLib worker thread.
This is the reason that the start() call was introduced in the previous
commit. The backends that don't use the start() call will have a very
thin race between creating the monitor and connecting the signal, but
hopefully they will be fixed soon.
These new APIs will be used (at least) from gdesktopappinfo to watch for
changes in the desktop file directories.
https://bugzilla.gnome.org/show_bug.cgi?id=704887
and start using the new start() vcall on the local monitor classes.
I only port inotify because I am uncomfortable making changes to the
other monitor backends without having a way of testing them.
https://bugzilla.gnome.org/show_bug.cgi?id=704887
Stop abusing constructor() to do startup work, adding _start() calls
instead.
The backends themselves still use constructor() although a patch will be
following to also fix inotify.
The reason for using a separate start() call instead of constructed()
will become apparent in future commits.
https://bugzilla.gnome.org/show_bug.cgi?id=704887
During initialisation of a directory monitor with the
G_FILE_MONITOR_WATCH_MOUNTS flag set, GLocalDirectory monitor will add a
UNIX mount watch in case the file notification backend doesn't support
reporting these events for itself.
Unfortunately, it was performing the check incorrectly, resulting in a
monitor always being added.
Fix that, and add the #define for G_LOCAL_DIRECTORY_MONITOR_GET_CLASS()
that was also missing (since the fix depends on it).
https://bugzilla.gnome.org/show_bug.cgi?id=704882
Matthew Barnes noted this on IRC a few days ago. I just had this file
open for other reasons and decided to tweak the docs to make this trap
more clear.
https://bugzilla.gnome.org/show_bug.cgi?id=709301
Don't return children with invalid schemas from
g_settings_list_children() (ie: missing schemas or mismatched paths).
This prevents gsettings list-recursively from crashing when broken
schemas are installed on the system.
https://bugzilla.gnome.org/show_bug.cgi?id=705688
There are some corner cases where using the sync version of read/write
in a thread could cause thread-safety issues. In these cases it's
possible to override the output stream's splice_async() function,
but for input streams one would need to do some acrobatics to
stay thread-safe. Alternatively, some implementations may not even
override their sync read/write functions.
This patch refactors the default splice_async() implementation to
call the sync read and write functions in a thread only when both
async versions are thread-based. When one or both are non-threaded,
it calls the virtual write_async() and read_async() functions of the
involved streams within the same thread.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
Refactor g_output_stream_close_async() into itself and an internal
variant for potential use inside other operations (splice_async).
The internal version must be called between
g_output_stream_set_pending() and g_output_stream_clear_pending().
https://bugzilla.gnome.org/show_bug.cgi?id=691581
Previously, no testcases tested the close flags of
g_output_stream_splice_async. This patch adds tests for that and
also tests various combinations of threaded and non-threaded
GInputStream async reads and GOutputStream async writes.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
In implementing a better g_output_stream_splice_async() and possibly
other situtations it's helpful to know whether the output stream's
write function internally uses threads. If it and the input stream's
read async functions use threads, then the splice function could
spawn a single thread for better efficiency.
This patch adds a function to determine whether an output stream's
g_output_stream_write_async() function internally uses threads.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
In implementing a better g_output_stream_splice_async() and possibly
other situtations it's helpful to know whether the input stream's
read function internally uses threads. If it and the output stream's
write async functions use threads, then the splice function could
spawn a single thread for better efficiency.
This patch adds a function to determine whether an input stream's
g_input_stream_read_async() function internally uses threads.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
Rather than always calling out to g_file_get_path() (which
might block, whatever the documentation might say), postpone
the call until we actually need it.
https://bugzilla.gnome.org/show_bug.cgi?id=708753
g_cancellable_disconnect will wait until any pending "cancelled"
handlers finish. This is useful because disconnecting a handler can have the
side-effect of freeing data that the cancelled handler may rely on.
Unfortunately, the code used to enforce this synchronization between
"cancelled" handlers and g_cancellable_disconnect will also cause
deadlock if the cancelled handler itself calls g_cancellable_disconect.
Obviously, if g_cancellable_disconnect is explicitly called by a "cancelled"
handler, then the "cancelled" handler is shouldering the responsibility
of not using any data that may be freed by disconnection.
Also, g_cancellable_disconnect can be called in unexpected places by
lower layers in the code (for instance as a result of g_source_destroy).
In practice, this means it's easy for deadlocks to inadvertently crop
up when using "cancelled" handlers.
For these reasons, it would be good to fix the deadlock.
This commit prevents the deadlock by allowing foregoing synchronization,
if a pending "cancelled" handler is in the same thread as the
g_cancellabale_disconnnect call.
https://bugzilla.gnome.org/show_bug.cgi?id=705395
In the real_..._async wrapper for GFile.measure_disk_usage, skip the
wrapping of the progress callback in the case that the user gave a NULL
callback to the async function. This is a performance improvement
because the sync version won't have to do continuous sampling of the
clock to issue a call to the wrapper which will then do nothing.
Unfortunately, I made this simplifying assumption when writing the
wrapper, but forgot to actually implement it when making the sync call.
As a result, the wrapper is still called, and invokes the NULL callback,
causing a segfault.
Make sure we pass NULL if the user's callback was NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=707787
Make use of __wgetmainargs() on Windows so that we can get wide char
versions of the argv's that are passed in when this test program is being
invoked. This is necessary as one might enter non-ASCII, such as
CJK characters filenames and/or directories to run the test program
against, so that we can process the name(s) and pass the proper
UTF-8-encoded name(s) of the files/directories that is being tested.
https://bugzilla.gnome.org/show_bug.cgi?id=707787
It turns out that although dirent is available on mingw32 (where the
code was originally tested), it is not usable from MSVC.
Avoid portability problems by just using GDir.
Also, be careful about ensuring that we utf8-format filenames in our
error messages, and leave out the "file://" component since the strings
we're displaying are not URIs (and we don't want to make them URIs since
the extra escaping would reduce legibility).
Thanks to Chun-wei Fan <fanchunwei@src.gnome.org> for portions of this
patch and for reviews.
https://bugzilla.gnome.org/show_bug.cgi?id=707787
Virtaal installs a mime package for various .po-like file formats, one
of which has the extension .txt. This causes GLib to report ".txt"
files still as "text/plain" but no longer with complete certainty.
The result is that asserting !uncertain during the testsuite causes the
test to fail if Virtaal happens to be installed.
Remove this assertion.
On Windows and OS X, FIONREAD on a UDP socket gets the total number of
bytes available, not the number of bytes available in the next packet,
which is the more useful number (and how the function always behaved
on Linux).
On OS X, fix this by using SO_NREAD. On Windows, fix this by doing a
MSG_PEEK recv() into a giant buffer, since there is apparently no
other way to get the information.
https://bugzilla.gnome.org/show_bug.cgi?id=686786
The requested_conditions list access is not threadsafe. When passing
the socket ownership from a GSource callback to another thread, which
also creates a GSocketSource for the socket, it can happen that the
original GSocketSource is finalized at the same time as the new one
is created. This would cause inconsistencies in the requested_conditions
list and can cause assertions or completely undefined behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=705027
The RunDLL command call during get_session_address_dbus_launch() was
expecting _g_win32_run_session_bus@16 and g_win32_run_session_bus
on Win32 and Win64 respectively at least when GLib is compiled with MSVC,
not g_win32_run_session_bus@16, which caused annoying RunDLL error dialogue
boxes to show up during the use of GtkApplication (such as when running
gtk3-demo-application on Windows), prevented GtkApplication items from
being run for more than one time during the lifespan of the program,
and this also interfered with some GTK+ tests, causing them to fail.
Update accordingly to address the issue.
GNetworkAddress was allowing IPv6 scope ids in g_network_address_new()
/ g_network_address_parse(), but not in g_network_address_parse_uri().
Fix that.
Part of https://bugzilla.gnome.org/show_bug.cgi?id=669724
Convert {glib,gobject,gio}/tests to use the automake TAP driver
and test harness instead of gtester. To do so, we add a glib-tap.mk
that provides the same interface as glib.mk, except for the
reporting and coverage testing functionality. Eventually, we may
want to replace glib.mk with it. I've not yet converted the
toplevel tests/ directory, since it mixes gtestutils tests with
other binaries.
https://bugzilla.gnome.org/show_bug.cgi?id=692125
With UDP sockets, g_socket_bind() with allow_reuse=TRUE on Linux
behaved in a way that the documentation didn't suggest, and that
didn't match other OSes. (Specifically, it allowed binding multiple
multicast sockets to the same address.)
Since this behavior is useful, and since allow_reuse didn't have any
other meaning with UDP sockets, update the docs to reflect the Linux
behavior, and make it do the same thing on non-Linux.
https://bugzilla.gnome.org/show_bug.cgi?id=689245
Under C locale, open() in Python 3 sets the file encoding to ASCII.
As expat looks at encoding="..." in XML declaration, gdbus-codegen can
simply open the input file as binary and let expat decode the content.
https://bugzilla.gnome.org/show_bug.cgi?id=696633
When running a task in a thread, GTask may still be internally holding
a ref on the task in that thread even after the callback is called in
the original thread (depending on thread scheduling). Fix the test to
handle that by using a weak notify that signals a GCond, and wait for
that GCond from the main thread. (And add a corresponding check to
test_return_on_cancel().)
https://bugzilla.gnome.org/show_bug.cgi?id=705152
When an icon is requested as symbolic, our generic fallback algorithm
uses fullcolor icons when the specified icon name is not found, treating
the "-symbolic" suffix as another component of the icon name.
Change the algorithm to check beforehand if the icon is symbolic, remove
the suffix if so, and re-add it at the end for all the generated icon
names.
https://bugzilla.gnome.org/show_bug.cgi?id=680926
GFileMonitor takes great care to sample the thread-default main context
at the time that it is created in order that events can be dispatched to
the correct thread when they come in.
The inotify GFileMonitor implementation uses a global file descriptor
shared between all watches. It has to poll this file descriptor from
somewhere so it arbitrarily picks the default main context.
The problem with that is that the user might not be running it.
Let's use the GLib worker thread for this instead. It's guaranteed to
be running if you need it, and this is exactly the sort of problem it
was meant to solve.
https://bugzilla.gnome.org/show_bug.cgi?id=704873
The default GNOME 3.10 login process right now has gdm spawn a session
for the login screen, retaining the X server, but closing the session
bus. Right now in this scenario many GNOME components such as
gnome-settings-daemon attempt to "clean up" on shutdown by releasing
their owned names.
But they're shutting down because the session bus went away, so
releasing the name is pointless, and presently spews an error into the
journal.
This patch avoids that error spew, which helps system administrators
find *real* problems.
https://bugzilla.gnome.org/show_bug.cgi?id=704567
Add a missing Name entry, and add a terminal ; to the Actions
entry in org.gtk.test.dbusappinfo.desktop. desktop-file-validate
still contains about the DBusActivatable entry and about the
missing Exec entries. The former will go away when desktop-file-validate
gets updated for the latest spec revision.
Update GCancellableSource to call g_source_set_ready_time() when its
cancellable is cancelled, rather than manually checking the state of
the cancellable from prepare() and check().
This means that we now need to use g_cancellable_connect() rather than
g_signal_connect() at construction time, to avoid the connect/cancel
race condition. Likewise, use g_cancellable_disconnect() to avoid the
disconnect/cancel race condition when freeing the source. (In fact,
that was necessary in the earlier code as well, and might have
occasionally caused spurious criticals or worse.)
https://bugzilla.gnome.org/show_bug.cgi?id=701511
GPollableSource and GSocket's "broken" source never trigger on their
own, so with the changes to GSources in the last cycle, their check
and prepare functions are unnecessary (and undesired).
https://bugzilla.gnome.org/show_bug.cgi?id=701511
The unix input/output streams were using a gio-only source type that
was mostly identical to GUnixFDSource. Get rid of that source type
and just use GUnixFDSource instead.
https://bugzilla.gnome.org/show_bug.cgi?id=701511
For the glib-defined source types, and any source type that defines a
closure callback but not a closure marshal, use
g_cclosure_marshal_generic. And then remove all the other remaining
source closure marshals.
https://bugzilla.gnome.org/show_bug.cgi?id=701511
A counterpart for parsing of detailed actions into (name, target) pairs,
this new function prints them back.
We also add a new function to check for validity of action names. Only
valid action names are allowed when printing. Parsing accepts _some_
invalid names for backwards compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=704157
If the default route is via a device rather than a particular IP
address, then neither RTA_DST nor RTA_GATEWAY will be present in the
RTM_NEWROUTE message, and so GNetworkMonitorNetlink would ignore it,
and then think there was no default route. (This could happen with
certain kinds of VPNs, if they were set to route all traffic through
the VPN.)
Fix this by recognizing routes that specify RTA_OIF ("output
interface") instead of RTA_GATEWAY.
https://bugzilla.gnome.org/show_bug.cgi?id=701609
Add a fairly realistic testcase that ensures that GDesktopAppInfo with
DBusActivatable=true can successfully talk to GApplication for a variety
of purposes.
https://bugzilla.gnome.org/show_bug.cgi?id=699259
A previous version of the patch had OnlyShowIn support for desktop file
actions. This was removed from the spec and the patch rewritten, but
this bit of documentation slipped through. Remove it.
For some time, the desktop file specification has supported "additional
application actions". This is intended to allow for additional methods
of starting an app, such as a mail client having a "Compose New Message"
action that brings up the compose window instead of the folder list.
This patch adds support for this with a relatively minimal API.
In the case that the application is a GApplication and DBusActivatable,
desktop actions are translated into GActions that have been added to the
application with g_action_map_add_action(). This more or less closes
the loop on being able to activate an application with an action
invocation (instead of 'activate').
https://bugzilla.gnome.org/show_bug.cgi?id=664444
Add a new type of GAction that represents the value of a property on an
object. As an example, this might be used on the "visible-child-name"
property of a GtkStack.
https://bugzilla.gnome.org/show_bug.cgi?id=703270
It's possible to get a org.freedesktop.Properties.GetAll call even if we
have no readable properties in the introspection, in which case we
should return the empty list in the usual way.
We should certainly _not_ be dispatching to the method call handler of
an interface which has no properties (since it will not be expecting
this).
Add a check to make sure that there is at least one readable property
before assuming that a NULL get_property handler implies that we want to
handle properties asynchronously.
Add a testcase that was failing before the change and works after it.
https://bugzilla.gnome.org/show_bug.cgi?id=703437
We don't use # or other forms of links in the section headings.
We also capitalize them and don't put a final period.
This commit corrects several headings to follow these rules.
As it turns out, we have examples of internal functions called
type_name_get_private() in the wild (especially among older libraries),
so we need to use a name for the per-instance private data getter
function that hopefully won't conflict with anything.
cd html && gtkdoc-mkhtml $mkhtml_options gio ../gio-docs.xml
../xml/gdbusconnection.xml:2063: parser error : Opening and ending tag mismatch: literal line 2062 and para
</para>
^
We do a bunch of new validity checks for return values in response to
calls on the D-Bus property API but we miss the 'goto out' in one case.
Add it.
https://bugzilla.gnome.org/show_bug.cgi?id=698375
Add some type checking for the values returned from async property
handling calls, similar in spirit to the type checking we do for normal
method calls.
https://bugzilla.gnome.org/show_bug.cgi?id=698375
The existing advice in the documentation to "simply" register the
"org.freedesktop.DBus.Properties" interface if you want to handle
properties asynchronously is pretty unreasonable. If you want to handle
this interface you have to deal with all properties for all interfaces
on the path, and you have to do all of the checking for yourself. You
also have to provide your own introspection data.
Introduce a new convention for dealing with properties asynchronously.
If the user provides NULL for their get_property() or set_property()
functions in the vtable and has properties registered then the
properties are sent to the method_call() handler. We get lucky here
that this function takes an "interface_name" parameter that we can set
to "org.freedesktop.DBus.Properties".
We also do the user the favour of setting the GDBusPropertyInfo on the
GDBusMethodInvocation for their convenience (for much the same reasons
as they might want the already-available GDBusMethodInfo).
Add a testcase as well as a bunch of documentation about this new
feature.
https://bugzilla.gnome.org/show_bug.cgi?id=698375
Separate the code for validating a method call from the code for
actually scheduling it for dispatch.
This will allow property Get/Set/GetAll calls to be dispatched to the
method_call handler without duplicating a lot of code.
https://bugzilla.gnome.org/show_bug.cgi?id=698375
We presently do a lot of checks on property sets (signature check,
correct interface, property exists, etc.) from the worker thread before
dispatching the call to the user's thread. The typecheck, however, is
saved until just before calling the user's vfunc, in their thread.
My best guess is that this was done to save having to unpack the value
from the tuple twice (since we don't unpack it until we're just about
the call the user).
This patch moves the check to the same place as all of the other checks.
The purpose of this change is to allow for sharing this check with the
(soon-to-be-introduced) case of handing property sets from
method_call().
This change has a minor side effect: error messages generated by sending
invalid values to property sets are no longer guaranteed to be correctly
ordered with respect to the void returns from successful property sets.
They will instead be correctly ordered with respect to the other error
messages.
https://bugzilla.gnome.org/show_bug.cgi?id=698375
When parsing an address, we need to re-set "len" between IPv4 and
IPv6, since WSAStringToAddress() might set it to sizeof(struct sin_addr)
when trying to parse the string as IPv4, even if it fails. Also, we
need to make sure to not pass strings to WSAStringToAddress() that it
will accept but that we don't want it to.
When stringifying an address, we need to clear the sockaddr before
filling it in, so we don't accidentally end up with an unwanted
scope_id or the like.
https://bugzilla.gnome.org/show_bug.cgi?id=701401
Previously, g_file_copy() would (on Unix) create files with the
default mode of 644. For applications which might at user request
copy arbitrary private files such as ~/.ssh or /etc/shadow, a
world-readable copy would be temporarily exposed.
This patch is suboptimal in that it *only* fixes g_file_copy()
for the case where both source and destination are instances of
GLocalFile on Unix.
The reason for this is that the public GFile APIs for creating files
allow very limited control over the access permissions for the created
file; one can either say a file is "private" or not. Fixing
this by adding e.g. g_file_create_with_attributes() would make sense,
except this would entail 8 new API calls for all the variants of
_create(), _create_async(), _replace(), _replace_async(),
_create_readwrite(), _create_readwrite_async(), _replace_readwrite(),
_replace_readwrite_async(). That can be done as a separate patch
later.
https://bugzilla.gnome.org/show_bug.cgi?id=699959
Previously, we called g_file_query_info() *again* on the source at the
very end of the copy. This has the lame semantics that if the source
happened to be deleted, we would fail to apply attributes to the
destination. This could even be a security flaw.
This commit changes things so that we query info from the source
*stream* after opening - i.e. on Unix we use the proper fstat() and
friends. That way we operate more atomically.
https://bugzilla.gnome.org/show_bug.cgi?id=699959
The freedesktop application specification is largely overlapping the
GLib application D-Bus interface but implementing it will allow for
applications to be launched directly from desktop files, which we want.
We keep the old Gtk interface for compatibility reasons and because it
has some functionality not in the freedesktop spec (Busy state,
CommandLine, etc.).
https://bugzilla.gnome.org/show_bug.cgi?id=699259
Since services are based on D-Bus activation and desktop files are
supposed to be named like the busname for DBusActivatable applications
and since gnome-shell wants wmclass equal to the desktop file name, we
therefore want wmclass equal to the application ID in this case.
wmclass is determined from the prgname, which is otherwise pretty
pointless to set to some random thing in $(libexec) for a D-Bus service,
so set that to the appid.
This means that for D-Bus services, the following things are now all the
same:
- application ID
- prgname
- wmclass property set on all windows
- desktop file name
- well-known bus name
There are not many applications running as D-Bus services at present so
this shouldn't impact anybody except for gnome-clocks (where this change
will be fixing a bug) and gnome-terminal.
https://bugzilla.gnome.org/show_bug.cgi?id=699259
OS X's getaddrinfo() only supports IPv6 scope IDs that are interface
names, not numbers. So use if_indextoname() to get the name of an
interface and construct an address using that.
https://bugzilla.gnome.org/show_bug.cgi?id=700123
In the case that HAVE_DBUS_DAEMON was undefined (as in ostree where glib
is built before D-Bus) this test was failing. Move it inside the
HAVE_DBUS_DAEMON block.
Remove the complications that were introduced in an attempt to make the
gsettings and gschema-compile tests function as installed tests. These
tests are designed (in large part for gsettings and entirely for
gschema-compile) to test the in-tree tools and should not be testing the
system versions.
In the future we may want to move the use of the in-tree tools from the
gsettings testcase into the Makefile and install the resulting files,
allowing this testcase to run against those files, installed.
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
This should be the last users that need to be ported.
For some of the oldschool non-gtester-ified tests, we call g_test_init()
from main() because it is necessary in order to use
g_test_build_filename().
Since this feature is so utterly automake-centric, we may as well be
using the same terminology as automake itself (ie: although it's
BUILT_SOURCES, it's DIST_EXTRA, not DISTED).
Also add some comments to the enum explaining that these terms are
really corresponding directly to the automake terms.
https://bugzilla.gnome.org/show_bug.cgi?id=549783
Both g_[file|bytes]_icon_load() leave the `type' out parameter
untouched, while the async methods g_[file|bytes]_icon_load_finish()
always set it to NULL.
For consistency's sake NULLify it in the sync methods too.
https://bugzilla.gnome.org/show_bug.cgi?id=700725
While those strings ("Expecting 1 control message, got %d" and
"Expecting one fd, but got %d\n") have same singular/plural form
in english, it is not necessarily the case in other languages.
https://bugzilla.gnome.org/show_bug.cgi?id=695233
It's a recipe for race conditions and error; on some hardware
architectures one thread isn't guaranteed to see the results
of writes from another thread without a cache flush.
https://bugzilla.gnome.org/show_bug.cgi?id=700855
The test /gdbus/connection/large_message waits for a dbus name to appear.
The dbus name is created by a another process executed in the background.
If for some reason this fails, the test will likely wait forever.
This will avoid this situation by making the test fail if the dbus service
has not appeared after 10 seconds.
https://bugzilla.gnome.org/show_bug.cgi?id=698981
Back in the far-off twentieth century, it was normal on unix
workstations for U+0060 GRAVE ACCENT to be drawn as "‛" and for U+0027
APOSTROPHE to be drawn as "’". This led to the convention of using
them as poor-man's ‛smart quotes’ in ASCII-only text.
However, "'" is now universally drawn as a vertical line, and "`" at a
45-degree angle, making them an `odd couple' when used together.
Unfortunately, there are lots of very old strings in glib, and also
lots of new strings in which people have kept up the old tradition,
perhaps entirely unaware that it used to not look stupid.
Fix this by just using 'dumb quotes' everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=700746
It tries to run glib-compile-schemas and glib-mkenums, which
we won't have in the runtime tree.
Anyways it's kind of a dumb test since the best test for
compilation tools is...compiling things, which we already
do frequently.
Although none of the in-tree GSocketConnectable types need it, other
types (like SoupAddress) may find it useful to be able to pass a URI
and a default-port to GProxyAddressEnumerator separately (the same way
you can with GNetworkAddress). So add a default-port property.
https://bugzilla.gnome.org/show_bug.cgi?id=698877
The GError should be initialized to NULL, otherwise we'll
"pile up" errors, then try to free an uninitialized pointer.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=699493
Not all systems have /usr/bin/true. Some have it in /bin/true.
Instead of trying to guess a hardcoded path to find it, let
g_app_info_create_from_commandline() internally search PATH
to find the program.
https://bugzilla.gnome.org/show_bug.cgi?id=698655
GUnixSocketAddress has some very strange logic for interpreting its
construct paramters. This logic behaves differently in these two cases:
g_object_new (G_TYPE_UNIX_SOCKET_ADDRESS,
"abstract", FALSE,
"address-type", ...,
NULL);
and
g_object_new (G_TYPE_UNIX_SOCKET_ADDRESS,
"address-type", ...,
NULL);
even though the default value for "abstract" is already FALSE.
Change the way the code works so that it is not sensitive to people
merely setting a property to its default value.
https://bugzilla.gnome.org/show_bug.cgi?id=698686
This function takes a GIcon, serialises it and sets the resulting
GVariant as the "icon" attribute on the menu item. We will need to add
a patch to Gtk to actually consume this icon.
Also add G_MENU_ATTRIBUTE_ICON.
https://bugzilla.gnome.org/show_bug.cgi?id=688820
Add support for serialising a GIcon to a GVariant and deserialising the
result back to a GIcon.
This solves a number of problems suffered by the existing to_string()
API, primarily these:
- not forcing the icon to be a utf8 string means that we can
efficiently encode a PNG (ie: just give the array of bytes)
- there is no need to ensure that proper types are loaded before using
the deserialisation interface. 'Foreign' icon types will probably
emit a serialised format the deserialises to a GBytesIcon.
We additionally clearly document what is required for being a consumer
or implementation of #GIcon.
Further patches will be required to GdkPixbuf and GVfsIcon to bring
their implementations in line with the new rules (essentially: introduce
implementations of the new serialize() API).
https://bugzilla.gnome.org/show_bug.cgi?id=688820
GBytesIcon is an icon that has a GBytes inside of it where the GBytes
contains some sort of encoded image in a widely-recognised file format.
Ideally this will be a PNG.
It implements GLoadableIcon, so GTK will already understand how to use
it, but we will add another patch there to make things more efficient.
https://bugzilla.gnome.org/show_bug.cgi?id=688820
Split out the 'simple string format' cases of URIs, file paths and
themed icons to a separate function.
This function will be shared by g_icon_deserialize().
https://bugzilla.gnome.org/show_bug.cgi?id=688820
In the *_async_thread() functions, call the corresponding synchronous
function instead of calling the interface vfunc, which can be NULL.
In some cases the check for the vfunc == NULL was done, but to be
consistent it is better to always call the synchronous version (and the
code is simpler).
https://bugzilla.gnome.org/show_bug.cgi?id=548353
This feature is intended for clients that want to signal a desktop shell
their busy state, for instance because a long-running operation is
pending.
The API works in a similar way to g_application_hold and
g_application_release: applications can call g_application_mark_busy()
to increase a counter that will keep the application marked as busy
until the counter reaches zero again.
The busy state is exported read-only on the org.gtk.Application interface
for clients to use.
https://bugzilla.gnome.org/show_bug.cgi?id=672018
It is possible that the upstream servers return something, but
we then filter all results because they are of the wrong type.
In that case the API and subsequent GTask calls expect a GError
to be set.
https://bugzilla.gnome.org/show_bug.cgi?id=696857
to avoid warnings when built with -Wredundant-decls:
sessionmanager-presence-generated.c:316:1: warning: redundant redeclaration of ‘session_manager_presence_default_init’ [-Wredundant-decls]
sessionmanager-presence-generated.c:281:1: note: previous definition of ‘session_manager_presence_default_init’ was here
sessionmanager-presence-generated.c:1273:1: warning: redundant redeclaration of ‘object_default_init’ [-Wredundant-decls]
sessionmanager-presence-generated.c:1259:1: note: previous definition of ‘object_default_init’ was here
https://bugzilla.gnome.org/show_bug.cgi?id=696108
Expand and formalise the syntax for detailed action names, adding a
well-documented (and tested) public parser API for them.
Port the only GLib-based user of detailed action names to the new API:
g_menu_item_set_detailed_action(). The users in Gtk+ will also be
ported soon.
https://bugzilla.gnome.org/show_bug.cgi?id=688954
We need to close the stream *before* applying the file modes, because
g_file_replace() allocates a temporary file. At the moment we're
applying the modes to the extant file, then immediately rename()ing
over it with the default perms.
This regressed with commit 166766a89f.
The real fix here is to have g_file_create_with_info() so that we can
atomically create a file with the permissions we want.
https://bugzilla.gnome.org/show_bug.cgi?id=696014
_g_dbus_method_invocation_new is said to allow method_info == NULL,
but will crash inside g_dbus_method_info_ref when the method_info
really is NULL, because g_dbus_method_info_ref does not allow NULL as
parameter. Fixed by checking for NULL in _g_dbus_method_invocation_new
itself.
The leak itself happens because _g_dbus_method_invocation_new stores a
new reference to the method_info without also unreferencing it. Fixed
by adding the missing unref, protected by an if because the pointer
may be NULL.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=695376
We were using PATH_MAX to size a static array for reading lines from
the .hidden file. Some platforms (Hurd) don't declare a PATH_MAX.
Switch to using g_file_get_contents() and g_str_split('\n') instead.
Also take the time to clean up a bit with a switch to using a 'set mode'
GHashTable (since this code was originally written before we had those).
This patch is largely based on a patch from Emilio Pozuelo Monfort (who
also reported the bug).
https://bugzilla.gnome.org/show_bug.cgi?id=695147
Commit f641699 (for bug 675333) introduced a check whether the Exec= program in
a .desktop actually exists. This broke the /appinfo/mime/* test cases which use
executable names like "my_app".
Use real ones instead (like "echo" and "sleep"), and add a new
/appinfo/mime/ignore-nonexisting test case which verifies that
g_desktop_app_info_new() indeed ignores nonexisting executables.
https://bugzilla.gnome.org/show_bug.cgi?id=695191
Some (broken) toolchains for example trip up
-Werror=missing-prototypes in system headers. This patch allows
people to skip the formerly hardcoded "baseline" warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=694757
The documentation was suggesting that using G_APPLICATION_IS_SERVICE
would automatically set an inactivity timeout (ie: app stays around for
a while after the use count drops to zero).
In reality, it only adds an initial 10 second wait for the first
activation message to arrive after which it uses the normal inactivity
timeout mechanism.
Implement the g_network_monitor_can_reach_async() rather than falling
back to the default implementation, which calls the sync version (not
in a thread).
https://bugzilla.gnome.org/show_bug.cgi?id=694181
Enumerate the GSocketConnectable before checking for a default route.
For some connectable types this will involve a DNS lookup. This will
elminate false positives for hosts behind a VPN since DNS lookup will
fail if the VPN is not connected.
https://bugzilla.gnome.org/show_bug.cgi?id=694181
If the resolver reloads (ie, if /etc/resolv.conf changes),
GNetworkAddress needs to re-resolve its addresses the next time it's
enumerated. Otherwise hosts that have different IP addresses inside
and outside a VPN won't work correctly if you hold on to a
GNetworkAddress for them for a long time.
https://bugzilla.gnome.org/show_bug.cgi?id=694181
If a GNetworkAddress is created with a hostname like "fe80::xxx%em1",
make sure that the scope_id corresponding to "em1" is present in the
GSocketAddresses it returns when used as a GSocketConnectable.
https://bugzilla.gnome.org/show_bug.cgi?id=684404
Add GSimpleProxyResolver, for letting people do static proxy
resolution, and to use as a base class for other resolvers (such as
GProxyResolverGnome).
https://bugzilla.gnome.org/show_bug.cgi?id=691105
Add a proxy-resolver property to GSocketClient, to allow overriding
proxy resolution in situations where you need to force a particular
proxy rather than using the system defaults.
https://bugzilla.gnome.org/show_bug.cgi?id=691105
This is a GLib reimplementation of dbus_address_escape_value().
It's useful if you want to construct a D-Bus address from pieces:
for instance, if you have a listening Unix socket whose path is known,
and you want to connect a D-Bus peer to it.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=693673
Reviewed-by: Colin Walters <walters@verbum.org>
[amended to add Since: 2.36 as per review]
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
If we don't connect to the control proxy's 'g-signal' signal, we won't have
'object-added' or 'object-removed' signals. So, connect to the 'g-signal' not
only when there already is a name-owner, but always.
https://bugzilla.gnome.org/show_bug.cgi?id=693285
While compiling, libtool will say that undefined symbols are not allowed, and
will refuse to make you a dll. This is only one line, easy to miss. And it
doesn't prevent `make' from completing successfully.
The code this patch adds is from other Makefile.am files that use
$(no_undefined). It's absence in gio is, most likely, an oversight.
Fixes#692058
The flowinfo and scope_id fields of struct sockaddr_in6 are in host
byte order, but the code previously assumed they were in network byte
order. Fix that.
This is an ABI-breaking change (since before you would have had to use
g_ntohl() and g_htonl() with them to get the correct values, and now
that would give the wrong values), but the previous behavior was
clearly wrong, and no one ever reported it, so it is likely that no
one was actually using it.
https://bugzilla.gnome.org/show_bug.cgi?id=684404
There are two benefits to this:
1) We can centralize any operating system specific knowledge of
close-vs-EINTR handling. For example, while on Linux we should never
retry, if someone cared enough later about HP-UX, they could come by
and change this one spot.
2) For places that do care about the return value and want to provide
the caller with a GError, this function makes it convenient to do so.
Note that gspawn.c had an incorrect EINTR loop-retry around close().
https://bugzilla.gnome.org/show_bug.cgi?id=682819
Ok, this function was just an awful mess before. Now the problem
domain is not trivial, and I won't claim this new code is *beautiful*,
but it should fix the bug at hand, and be somewhat less prone to
failure for the next person who tries to modify it. There's only one
unref call for each object now.
https://bugzilla.gnome.org/show_bug.cgi?id=692408
gio's glib-mkenums call needs to get gnetworking.h out of $(builddir),
not $(srcdir). Fix/simplify it by using $(filter) on $^ and letting
make find everything.
Also add -Wno-portability to AM_INIT_AUTOMAKE in configure.ac, so that
it doesn't warn about this (or about the gmake-specific features we
were already using in gio/tests/)
https://bugzilla.gnome.org/show_bug.cgi?id=691866
Use the same code GSocket does, to try SOCK_CLOEXEC first, and then
fall back to FD_CLOEXEC if it fails. (And fix that code to not call
fcntl if SOCK_CLOEXEC worked.)
https://bugzilla.gnome.org/show_bug.cgi?id=692332
When an error occurs while reading the file input stream in
g_file_load_contents (e.g. because the operation was cancelled), the
code is correctly calling g_task_return_error(), but in the callback
from the close operation, g_task_return_boolean() will be called again.
Code that cleans up its state in the async callback will then be called
twice, leading to invalid memory access.
https://bugzilla.gnome.org/show_bug.cgi?id=692202
Declare explicit support for monitor NFS from the fam file monitoring
backend. This will cause it to be preferred for monitoring on NFS, if
it is installed.
https://bugzilla.gnome.org/show_bug.cgi?id=592211
Add a pair of new extension points: 'gio-nfs-file-monitor' and
'gio-nfs-directory-monitor'.
Add a check to GLocalFile when creating a file monitor. If the
requested file is in the user's home directory and the user has an NFS
home directory then attempt to use an implementation of one of the new
extension points. If we don't have any implementations then fall back
to the normal "local" monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=592211
Get rid of the complicated default module detection code in
GLocalFileMonitor and GLocalDirectoryMonitor and use the new
_gio_module_get_default_type() function instead.
This change also adds the ability to override the default file monitor
via the GIO_USE_FILE_MONITOR environment variable in the same way as can
be done for GIO_USE_VFS.
https://bugzilla.gnome.org/show_bug.cgi?id=592211
_gio_module_get_default() is a very convenient function for modules
implementing a singleton -- it finds the default module by priority
subject to override by a given environment variable name, instantiates
it, and caches the instance for future calls. It also has the ability
to query instances for being 'active' using a callback.
It doesn't work very well for non-singletons (like file monitors).
Add a new function _gio_module_get_default_type() that skips the
instantiation, returning the GType instead. As a replacement for the
'active' callback, a vtable offset can be given for a virtual function
to use to query if a particular backend is supported.
https://bugzilla.gnome.org/show_bug.cgi?id=592211
We have various sub directories in glib/ and gio/ (eg: inotify, gnulib,
pcre, xdgmime, etc.) that build convenience libraries that are then
included into libglib and libgio. The files in these directories need
to be built with the same visibility policy as the files in the first
level directories, so add CFLAGS for them all.
This wasn't a problem when the visibility flags were set directly in
CFLAGS but then we had to deal with some modules that we built that we
explicitly wanted to export symbols from.
For now, we can keep things the way they are because it's less hacky and
although it's a theoretical hazard to forget these CFLAGS, we rarely add
new subdirectories to the build.
Before this commit, the only difference between the expected and actual
ABI were the addition of _init and _fini symbols in each module (now
that regexp-based export control is not catching those).
Add read_async() and skip_async() tests to buffered-input-stream.
Fix and re-enable filter-streams's existing close_async() tests, and
add read_async(), skip_async(), and write_async() tests as well. Also,
redo the tests to use dummy GFilterInputStream and GFilterOutputStream
subclasses rather than GBufferedInput/OutputStream, so that we're
testing the base filter stream implementations of everything (since
the buffered stream overrides are already getting tested in the
buffered-input-stream and buffered-output-stream tests anyway).
Add a skip_async() test to unix-streams. (This one would crash without
the bugfix in the previous commit.)
skip_callback_wrapper expect the user_data (callback_data)
to be the task holding the task_data, not the task_data
itself.
Otherwise the task_data is cast as GTask and then task_data
is extracted from this bogus task.
https://bugzilla.gnome.org/show_bug.cgi?id=691812
We only want to control the default visibility for our five main
installable libraries: libglib, libgthread, libgmodule, libgobject,
libgio. We should therefore only set -fvisibility=hidden when building
those.
Use a separate substitution variable for this purpose.
Using CFLAGS directly leads to some modules built in testcases not
exporting their symbols (and then the tests fail). It also affects the
fam file monitoring module.
Colin had originally done it this way in his visibility patch series but
I failed to understand why so I didn't copy it. Now I do.
Also: revert changes made to two testcases in an attempt to work around
this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=691756
Add an #ifdef G_OS_UNIX around the GLIB_AVAILABLE_IN_ALL annotation on
the _get_type() functions for GLocal{File,Directory}Monitor.
These symbols are in private header files and are only exported so that
the in-tree file monitoring modules can subclass. This is only needed
on UNIX and was therefore never part of the public ABI on Windows.
Caught by Dieter Verfaillie.
One of our testcases builds a small giomodule for testing the loading of
modules containing resources. Unfortunately, this module gets built
using the same CFLAGS as the rest of GLib, including the visibility
flags (defaulting to hidden).
Use "config.h" to get a declaration of _GLIB_EXTERN that will export
symbols properly and use it to annotate the necessary APIs.
The kqueue file monitoring backend was misusing G_GNUC_INTERNAL for want
of 'static' in a couple of places and also using it to declare a lock
that was never used at all.
Fix those up.
With visibility now under the control of __declspec(dllexport) we no
longer need to build .def files or use them for building our various
.dll files.
.def files used to be installed (even though it is only really useful
when creating the .dll or .lib file). Don't do that anymore either.
The Makefiles still contain rules to create a .lib file for use with
Visual Studio and these rules require .def files. There are special
requirements to using these rules (like having installed and setup
Microsoft tools for use during the build) and therefore the problem of
creating a .def file for use with them is left open to anyone willing to
make the effort. Many options are available depending on which
toolchain is in use (dlltool, pexport, gendef, dumpbin.exe, just to name
a few).
If we can find a free tool for creating .lib files in the future, we
should probably revisit this issue and add proper support back to our
build system.
Add the GLIB_AVAILABLE_IN_ALL annotation to all old functions (that
haven't already been annotated with the GLIB_AVAILABLE_IN_* macros or a
deprecation macro).
If we discover in the future that we cannot use only one macro on
Windows, it will be an easy sed patch to fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=688681
glib-mkenums is not currently clever enough to know which version an
enum type was added in, so just mark all the _get_type() functions as
available in all versions.
https://bugzilla.gnome.org/show_bug.cgi?id=688681
This allows compilation with clang without errors, even when
-Wformat-nonliteral is active (as long as there are no real cases of
non literal formatting).
https://bugzilla.gnome.org/show_bug.cgi?id=691608
g_input_stream_real_skip_async() wants to use read_async() normally,
but will use skip() in a thread instead if it sees that read_async()
will end up using threads. Except that the test for "will read_async()
use threads" never got updated to know about the GPollableInputStream
support in read_async(), so it was doing the wrong thing in that case.
Fix.
Also remove a small bit of pre-GTask cruft noticed nearby.
https://bugzilla.gnome.org/show_bug.cgi?id=691489
For OSTree, I use Gio and also really care about performance. It's
disturbing to see open('.hidden') all over my straces and such. At
the moment I have an explicit set of things to query, as opposed to
"standard::*", since even before this that also implies an lstat() of
the parent directory.
This matches up with what we do for all the other attributes.
See https://bugzilla.gnome.org/show_bug.cgi?id=587806https://bugzilla.gnome.org/show_bug.cgi?id=691558
Since we're dynamically loading objects, after the g_type_init()
change, we now need to ensure people building with --as-needed don't
lose the DT_NEEDED on libgobject.
https://bugzilla.gnome.org/show_bug.cgi?id=691077
Some OS (e.g. OpenBSD) do not implement IP v4-mapped addresses. When
this is the case, then we get a "Connection refused", so force the test
to pass to that further tests can run.
https://bugzilla.gnome.org/show_bug.cgi?id=686058
The attached patch adds support for the btrfs "clone" ioctl which
makes Copy-on-Write reflinks, resulting in cheap O(1) copies when
source/destination are on the same filesystem. The ioctl itself is
quite straightforward, and GNU coreutils has had support since 7.5
(--reflink=auto --sparse=auto).
The ioctl only operates on regular files and symlinks, and always
follows symlinks; checks have been added accordingly.
This patch would be very useful for everyone who uses btrfs
filesystems (Meego folks for instance). On systems that don't have
btrfs, or if the the source is not on a btrfs filesystem, the ioctl
returns EINVAL, and the fallback code is triggered. Hence this will
cause no problems for non-btrfs users.
https://bugzilla.gnome.org/show_bug.cgi?id=626497
a5876e5f made GMemoryInputStream subclassable, but accidentally broke
read_async() and skip_async() in the process. The immediately
following e7983495 fixed read_async() (and added a test for it), but
skip_async() accidentally got... skipped.
Fix it now and add a test for it.
Also, GMemoryInputStream's skip_async() was assuming that skip() could
never fail, which is true of its own implementation, but might not be
true of a subclass's, so do proper GError handling too.
This will let us drop the dbus-python dependency.
The C version does not 100% reproduce all the hash table
and array manipulation of the python version, but the tests
do not rely on it anyway.
This greatly simplifies the test since everything is now in a single
process and possible bugs / quirks in libdbus-1 will not interfere
with the tests. On the other hand, we no longer test interoperability
with libdbus-1. This is somewhat moot, however, since other tests that
involve a message bus (e.g. GTestDBus users which include most of the
GDBus test suite itself) will test this.
Also ensure that we don't pollute existing D-Bus keyrings for the
DBUS_COOKIE_SHA1 authentication method (e.g. files in the
~/.dbus-keyrings directory) by setting the environment variables
G_DBUS_COOKIE_SHA1_KEYRING_DIR and
G_DBUS_COOKIE_SHA1_KEYRING_DIR_IGNORE_PERMISSION.
All in all, this change avoids some thorny issues where the GDBus and
libdbus-1 implementations disagree on whether an item in the D-Bus
keyring is still valid (items have an age etc.). In reality, since the
DBUS_COOKIE_SHA1 authentication method is never used in production,
this is never hit in production. This bug was, however, frequently hit
if you just ran the test suite repeatedly for 15 minutes or so.
Also add TODO items to mention that we currently don't test corner
cases involving
- DBUS_COOKIE_SHA1 timeouts
- libdbus-1 interoperability
Signed-off-by: David Zeuthen <zeuthen@gmail.com>
This DTD wasn't syntactically correct, and didn't actually
describe keys correctly. This change makes it a bit too lax,
but at least it can be used now.
https://bugzilla.gnome.org/show_bug.cgi?id=690538
This returns a GInputStream corresponding to the stdin on the
commandline that caused this invocation.
The local case works on both UNIX (GUnixInputStream on stdin) and
Windows (GWin32InputStream on GetStdHandle(STD_INPUT_HANDLE)). The
remote case works only on UNIX (by fd passing over D-Bus).
https://bugzilla.gnome.org/show_bug.cgi?id=668210
Add a new GFileMonitorFlag: G_FILE_MONITOR_WATCH_HARD_LINKS. When set,
changes made to the file via another hard link will be detected.
Implement the new flag for the inotify backend.
https://bugzilla.gnome.org/show_bug.cgi?id=532815
As RFC 2292 points out, some platforms (e.g. Darwin 9.8.0) provide
CMSG_FIRSTHDR(msg) which just returns msg.msg_control without first
checking if msg.msg_controllen is non-zero. We need a workaround for
such platforms not to let g_socket_receive_message() segfault.
https://bugzilla.gnome.org/show_bug.cgi?id=690388
If tasks block waiting for other tasks to complete then the system can
end up starved for threads. Avoid this by bumping up max-threads in
that case.
This also reverts 7b1f8c58 and reverts max-threads for GTask's
GThreadPool back to 10.
https://bugzilla.gnome.org/show_bug.cgi?id=687223
On IPv6 sockets, set both the IPv4 and IPv6 versions of IP socket
options, in case the socket is (or might become) IPv4-wrapped. (But
ignore errors when setting the IPv4 version.)
Similarly, when joining or leaving a multicast group, pick the sockopt
to use based on the address family of the multicast address rather
than the address family of the socket.
https://bugzilla.gnome.org/show_bug.cgi?id=687092
Since Windows builds by Visual C++ do not make use of autotools during
its build process, we need to dist a pre-configured
gio/gnetworking.h(.win32) for such builds.
The vs9/vs10 (and therefore vs11) property sheets are updated as well
https://bugzilla.gnome.org/show_bug.cgi?id=690163
This is a new convenience method designed to simplify some use
cases of GFileEnumerator, by making it easy to get the next file
from a file enumerator.
https://bugzilla.gnome.org/show_bug.cgi?id=690083
Add g_socket_get_option() and g_socket_set_option(), wrapping
getsockopt/setsockopt for the case of integer-valued options. Update
code to use these instead of the underlying calls.
https://bugzilla.gnome.org/show_bug.cgi?id=623187
Install a public "gnetworking.h" header that can be used to include
the relevant OS-dependent networking headers. This does not really
abstract away unix-vs-windows however; error codes, in particular,
are incompatible.
gnetworkingprivate.h now contains just a few internal URI-related
functions
Also add a g_networking_init() function to gnetworking.h, which can be
used to explicitly initialize OS-level networking, rather than having
that happen as a side-effect of registering GInetAddress.
https://bugzilla.gnome.org/show_bug.cgi?id=623187
Since there is only one resolver implementation now, we can move the
resolver utility functions from gresolver.c into gthreadedresolver.c,
and remove the prototypes from gnetworkingprivate.h.
https://bugzilla.gnome.org/show_bug.cgi?id=623187
The G_OBJECT_WARN_INVALID_PROPERTY_ID() macro uses a local variable
named "_object"; work around this by using "object" as the variable we
pass in.
https://bugzilla.gnome.org/show_bug.cgi?id=689377
This makes sure not to ifdef _g_io_win32_get_module() out when glib is
built as a static lib, and also fixes it to work when DllMain isn't
available.
The implementation uses GetModuleHandleEx() which is only available on
Windows XP and later, so this commit effectively drops the Windows 2000
support in glib. Earlier commit 731b4699 already took care of defining
_WIN32_WINNT to support the Windows XP API.
https://bugzilla.gnome.org/show_bug.cgi?id=675516
Now that we're directly accessing the memory holding a message blob,
we can access strings directly while reading them. This speeds up
read_string significantly, since we no longer malloc/memcpy/free.
The three processes this test creates need to be executed
in order, and g_usleep was used to guarantee that.
However, under heavy load, that is not enough. Instead,
wait until the children start by making sure they have
written to stdout before proceeding any further.
https://bugzilla.gnome.org/show_bug.cgi?id=664627
GData*Streams incur significant overhead, and we do not need all of the
functionality that they provide, since we only ever read from/write to
memory when handling message blobs, so it is more performant to use a
simple structure.
https://bugzilla.gnome.org/show_bug.cgi?id=652650
... and g_content_type_get_generic_icon_name(). The new functions are
implemented for Win32 since commit dace477c, so we no longer need to
guard them with G_OS_UNIX.
Really, the memory output stream API is too warped around the model
where it's a fixed size buffer that you've already allocated. Even in
C, I find myself always wanting to use it to just accumulate data into
an arbitrary-sized buffer it allocates.
Unfortunately, it's also not usable from bindings because it's not
common to bind g_free() and g_realloc(), but if you just pass NULL, you
get the default of a fixed size, which is useless as per above.
I am going to use this from a gjs test case, and the GSubprocess test
cases also will use it.
https://bugzilla.gnome.org/show_bug.cgi?id=688931
Add a pair of new APIs: one to GFile to create a new file from a
commandline arg relative to a given cwd and one to
GApplicationCommandLine to create a GFile from an arg, relative to the
cwd of the invoking commandline.
https://bugzilla.gnome.org/show_bug.cgi?id=689037
If we fail to start (and don't register() or call startup()) then also
don't call shutdown(). This happens in the case of failing to parse
commandline arguments, for example.
gnome-session needs to know the startup id that was given to
a started app; this was not available via GAppLaunchContext.
This commit adds a ::launched signal to get this information.
At the same time, turn the launch_failed vfunc into a signal
as well.
https://bugzilla.gnome.org/show_bug.cgi?id=688497
gnome-session still uses EggDesktopFile, since GDesktopAppInfo is
missing a handful of APIs that are needed to implement the
autostart spec. This patch adds the minimum that is required.
https://bugzilla.gnome.org/show_bug.cgi?id=688497
This reverts commit 85976cf91d and
properly removes the offending symbols from gio.symbols.
These two private symbols were found to be exported during Colin's
recent work cleaning up function visibility (among other things).
They were never exposed in any header file and I am 100% certain that
they have never been used by anybody. They were always private -- only
exposed on the library symbol list.
This change will cause ABI checking tools to complain that we have
removed functions, but the change is completely harmless for actual
applications.
https://bugzilla.gnome.org/show_bug.cgi?id=687441
MacOS provides the O_EVTONLY flag to open(2) which allow to open a file
for monitoring without preventing an unmount of the volume that contains
it.
https://bugzilla.gnome.org/show_bug.cgi?id=688518
Re-#define a few socket functions to work around winsock's prototypes
having, eg, "int *" rather than "unsigned int *", or "char *" rather
than "void *".
(Also fix two places that mistakenly assumed guint==guint32.)
https://bugzilla.gnome.org/show_bug.cgi?id=688109
GLocalFile was (in certain situations) translating a path like
"/foo/bar/baz" to "/foo\bar\baz" on win32. Fix it to make sure the
initial directory separator gets canonicalized too.
Fixes gio/tests/g-icon on win32.
https://bugzilla.gnome.org/show_bug.cgi?id=688109
Rather than defining _WIN32_WINNT only in a handful of files, define
it in config.h, like we do with _GNU_SOURCE.
(Also remove a "#define WIN32_LEAN_AND_MEAN" that isn't really all
that useful.)
https://bugzilla.gnome.org/show_bug.cgi?id=688109
Rather than using "extern" declarations of these win32 functions
everywhere they're needed, just prototype them in glib-private.h.
(Which also fixes the fact that they weren't prototyped in the files
where they're defined.)
https://bugzilla.gnome.org/show_bug.cgi?id=688109
Written by Dmitry Matveev as part of GSoC 2011:
http://netbsd-soc.sourceforge.net/projects/kqueue4gio/
This brings native file monitoring support on systems supporting kqueue(3)
(all BSDs) and remove the need to rely on the unmaintained gamin software.
The backend adds GKqueueDirectoryMonitor and GKqueueFileMonitor.
Some parts rewritten by myself (to prevent needing a configuration file).
Helpful inputs from Colin Walters and Simon McVittie.
https://bugzilla.gnome.org/show_bug.cgi?id=679793
$ sed -i s,determing,determining,g gio/gdrive.c
$ sed -i s,determing,determining,g gio/gdbusprivate.c
http://www.merriam-webster.com/dictionary/determining
For some reason according to `git log --follow` the whole file was created during some translation update.
commit c45b813504
Author: Timo Jyrinki <timo@debian.org>
Date: Mon Mar 12 11:02:04 2012 +0200
Finnish translation update from http://l10n.laxstrom.name/wiki/Gnome_3.4 translation sprint
Darwin's poll doesn't change revents if there are no available events, though it returns 0. Initialize the fd.revents to 0 so that the test passes.
That reveals a test failure, though, because with socket streams it takes time for an event to pass through the socket. Provide an 80-usec delay to allow time for the propagation.
We were passing the wrong destroy notify when returning the list of
records, so it would crash if it got called (ie, if you didn't call
g_resolver_lookup_records_finish()).
(Also fix s/targets/records/ throughout the records functions.)
These both existed in 2.34.1, but are not exposed in headers, and were
meant to be private. Making them static (in commit 84475e43) was
technically an ABI break, and in particular it causes abicheck.sh to fail.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=687441
Reviewed-by: Colin Walters <walters@verbum.org>
Even private functions that are actually called across compilation
units should have prototypes. For g_dbus_action_group_sync(), create
one in gdbusactiongroup-private.h
https://bugzilla.gnome.org/show_bug.cgi?id=687385
Add some extra protection when 'preparing' a group that doesn't yet
contain any menus. This can happen if you subscribe to a group that
doesn't yet exist.
It was possible to crash any application using
g_dbus_connection_export_menu_model() by requesting a non-existent
subscription group over the bus.
In practice this only happened in races -- where the proxy sees a group
that exists and queries it, but by the time it does, it's already gone.
https://bugzilla.gnome.org/show_bug.cgi?id=687089
Allow GDBusObjectManagerClient to work on peer to peer DBus
connections. Don't require that a unique bus name is available
for the object manager, if the owned bus name is NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=686920
When building the file attribute table info for local files, use
thumbnail paths in $XDG_CACHE_DIR/thumbnails/large in addition to
$XDG_CACHE_DIR/thumbnails/normal.
Failing to do this would cause an application that creates large
thumbnails by default to never find any value for
G_FILE_ATTRIBUTE_THUMBNAIL_PATH, with no
G_FILE_ATTRIBUTE_THUMBNAILING_FAILED set, which might cause the
application to either think thumbnailing is still in progress, or
blindly requeue thumbnail operations in a loop.
Large thumbnails are generally preferred, so we now default to the path
of a large thumbnail (in case both are present).
https://bugzilla.gnome.org/show_bug.cgi?id=686895
Sometimes the poll duration in the /socket/timed_wait test is slightly
bigger than the requested 100000, causing failures like:
GLib-GIO:ERROR:socket.c:620:test_timed_wait:
assertion failed (poll_duration < 110000): (110057 < 110000)
Adjust the test to allow some jitter in the "too high" direction.
https://bugzilla.gnome.org/show_bug.cgi?id=686458
GBusNameVanishedCallback is called with a NULL GDBusConnection in the
case that the connection has vanished. We were doing an assert to
verify that it was the same as we had exported the menu on and that
assert was failing.
https://bugzilla.gnome.org/show_bug.cgi?id=685995
Very many testcases, some GLib tools (resource compiler, etc) and
GApplication were calling g_type_init().
Remove those uses, as they are no longer required.
https://bugzilla.gnome.org/show_bug.cgi?id=686161
We were using the user-passed value of the @property argument for
several purposes in g_settings_bind(): error messages, binding
uniqueness (ie: one-binding-per-property-per-object) and most
importantly, connecting to the detailed notify:: signal.
The user may pass a string like "property_name" when the property's
canonical name is "property-name". g_object_class_find_property() will
find the property under these circumstances, but a connection to
"notify::property_name" will not notice notifies emitted for
"property-name".
We can solve this by using the user's string to perform the lookup and
then using pspec->name for everything after that.
https://bugzilla.gnome.org/show_bug.cgi?id=684882
Reimplement gioscheduler in terms of GTask, and deprecate the original
gioscheduler methods. Update docs to point people to GTask rather than
gioscheduler and GSimpleAsyncResult, but don't actually formally
deprecate GSimpleAsyncResult yet.
https://bugzilla.gnome.org/show_bug.cgi?id=661767
GTask is a replacement for GSimpleAsyncResult and GIOScheduler, that
also allows for making cancellable wrappers around non-cancellable
functions (as in GThreadedResolver).
https://bugzilla.gnome.org/show_bug.cgi?id=661767
This is the expected (and sane) behavior - without this bug-fix you'd
have to add "Since" to every member of a newly added D-Bus interface.
Also show-case this in the codegen example.
Signed-off-by: David Zeuthen <zeuthen@gmail.com>
The newly-introduced functions, g_content_type_get_symbolic_icon() and
g_content_type_get_generic_icon_name() don't seem to be for Windows, at
least for now. So filter them out from gio.symbols on Windows.
Also, glocalfileinfo.c calls g_content_type_get_symbolic_icon() in
get_icon(), so only build that code when on Unix, for the time being.
https://bugzilla.gnome.org/show_bug.cgi?id=684278
Adding the --sourcedir option fixes these:
/path/to/src/gio/tests/test2.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
/path/to/src/gio/tests/test3.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
/path/to/src/gio/tests/test4.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
/path/to/src/gio/tests/test.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
Some programs attempt to use libglib (or even libgio) when setuid.
For a long time, GTK+ simply aborted if launched in this
configuration, but we never had a real policy for GLib.
I'm not sure whether we should advertise such support. However, given
that there are real-world programs that do this currently, we can make
them safer with not too much effort.
Better to fix a problem caused by an interaction between two
components in *both* places if possible.
This patch adds a private function g_check_setuid() which is used to
first ensure we don't run an external dbus-launch binary if
DBUS_SESSION_BUS_ADDRESS isn't set.
Second, we also ensure the local VFS is used in this case. The
gdaemonvfs extension point will end up talking to the session bus
which is typically undesirable in a setuid context.
Implementing g_check_setuid() is interesting - whether or not we're
running in a privilege-escalated path is operating system specific.
Note that GTK+'s code to check euid versus uid worked historically on
Unix, more modern systems have filesystem capabilities and SELinux
domain transitions, neither of which are captured by the uid
comparison.
On Linux/glibc, the way this works is that the kernel sets an
AT_SECURE flag in the ELF auxiliary vector, and glibc looks for it on
startup. If found, then glibc sets a public-but-undocumented
__libc_enable_secure variable which we can use. Unfortunately, while
it *previously* worked to check this variable, a combination of newer
binutils and RPM break it:
http://www.openwall.com/lists/owl-dev/2012/08/14/1
So for now on Linux/glibc, we fall back to the historical Unix version
until we get glibc fixed.
On some BSD variants, there is a issetugid() function. On other Unix
variants, we fall back to what GTK+ has been doing.
Reported-By: Sebastian Krahmer <krahmer@suse.de>
Signed-off-by: Colin Walters <walters@verbum.org>
g_dbus_connection_call_with_unix_fd_list_sync () and
g_dbus_connection_call_sync () should allow None for the
bus_name parameter.
https://bugzilla.gnome.org/show_bug.cgi?id=683771
Signed-off-by: Richard Hughes <richard@hughsie.com>
The test was assuming that all cancelled ops would finish within a
certain amount of time, but this often failed under valgrind. Instead,
just run the loop until all of the ops have actually finished.
https://bugzilla.gnome.org/show_bug.cgi?id=682560
If the interface given cannot be matched, `iface_obj' was left uninitialized and
the iface_obj == None check would end up crashing:
Traceback (most recent call last):
File "/usr/bin/gdbus-codegen", line 41, in <module>
sys.exit(codegen_main.codegen_main())
File "/usr/lib64/gdbus-2.0/codegen/codegen_main.py", line 175, in codegen_main
apply_annotations(all_ifaces, opts.annotate)
File "/usr/lib64/gdbus-2.0/codegen/codegen_main.py", line 146, in apply_annotations
apply_annotation(iface_list, iface, None, None, None, None, key, value)
File "/usr/lib64/gdbus-2.0/codegen/codegen_main.py", line 64, in apply_annotation
if iface_obj == None:
UnboundLocalError: local variable 'iface_obj' referenced before assignment
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=683088
On slower platforms, the overhead of the 240 D-BUS Sleep calls is larger than
the current maximum of 6 seconds. A run on a Panda board sometimes fails with
ERROR:/build/buildd/glib2.0-2.33.8/./gio/tests/gdbus-threading.c:409:test_method_calls_on_proxy:
assertion failed (elapsed_msec < 6000): (7365 < 6000)
Bump maximum time to 8 seconds to be more resilient to this.
https://bugzilla.gnome.org/show_bug.cgi?id=682222
Because it now handles EINTR. And we should do so. While most people
use Linux, which tries very hard to avoid propagating EINTR back up
into userspace, it can still happen.
https://bugzilla.gnome.org/show_bug.cgi?id=682833
The async test had several problems:
- It created a proxy and did not launch a main loop, meaning that its
callback would usually not get called, or, if it did get called, the
test harness would have taken down the connection already, causing an
assertion failure when the proxy had an error.
- It was dependent on the proxy test to set up the server and would fail
because some properties were modified by that test.
https://bugzilla.gnome.org/show_bug.cgi?id=674805
* In order to add contstruct properties to an abstract base
calls, and retain ABI stability, the base class must add a
default implementation of those properties.
* We cannot add a default implementation of certificate-bytes
or private-key-bytes since certificate and private-key properties
are writable on construct-only.
This reverts commit 541c985869.
https://bugzilla.gnome.org/show_bug.cgi?id=682081
There was a /* XXX */ in the code here to do proper typechecking of the
GVariant in the menu model when using g_menu_model_get_item_attribute().
We have g_variant_check_format_string() now, so use it.
Implement test case suggested by Ryan Lortie on bug:
https://bugzilla.gnome.org/show_bug.cgi?id=679288
"There is a potential race here that's really unlikely to happen, but
here we go: We are trying to read from the same socket in two threads.
Some data comes. That causes the poll() in both threads (above) to
finish running. Then the cancellable is checked above. We now find
ourselves here. Only one thread will read the data. The other will
block on this function. Then the user may cancel the cancellable while
we are blocked here, but we will stay blocked...."
If a named pipe is being read in message mode and the next message is
longer than the nNumberOfBytesToRead parameter specifies, ReadFile
returns FALSE and GetLastError returns ERROR_MORE_DATA.
Since the API doesn't allow to return both a GError and the number of
bytes read so far, it makes more sense to return nread, and let the
client call GetLastError() himself to check if ERROR_MORE_DATA.
The current alternative loses the nread information.
https://bugzilla.gnome.org/show_bug.cgi?id=679288
Any file handle created with FLAG_OVERLAPPED must have
ReadFile()/WriteFile() called with an OVERLAPPED structure.
Failing to do so will give unspecified results, invalid read/write or
corruption.
Without FLAG_OVERLAPPED, it is not possible to read and write
concurrently, even with two seperate threads, created by 2 input and
output gio streams. Also, only with FLAG_OVERLAPPED may an IO
operation be asynchronous and thus be cancellable.
We may want to call ReOpenFile() to make sure the FLAG is set, but
this API is only available since Vista+.
According to MSDN doc, adding the OVERLAPPED argument for IO operation
on handles without FLAG_OVERLAPPED is allowed, and indeed the existing
test still passes.
v2:
- update GetLastError() after _g_win32_overlap_wait_result ()
- split the unrelated ERROR_MORE_DATA handling
https://bugzilla.gnome.org/show_bug.cgi?id=679288
It is not great if calling g_permission_acquire on a simple
permission object just segfaults. This commit arranges for
this to return a G_IO_ERROR_NOT_SUPPORTED error.
-glib/gmarkup.c: Use G_VA_COPY() instead of va_copy() as va_copy() may not
be universally available.
-gio/gtestdbus.c: Include io.h on Windows for close()
In order to be able to cope with the introspection XML
from the Telepathy specification, which uses attributes
like tp:type and tp:name-for-bindings, we need to ignore
unknown attributes when parsing.
Closes: https://bugzilla.gnome.org/show_bug.cgi?id=665634
Using GIO here may cause the gvfs module to be loaded, which
in turn gets onto the session bus to talk to gvfsd - not ideal
if you are trying to control the session bus life cycle. Instead,
just use old-fashioned glib file utils.
Solaris/OpenSolaris/OpenIndiana define FIONREAD in sys/filio.h.
This commit adds a configure check for this header, and includes
it conditionally in gio/gsocket.c.
Patch by Fabian Groffen, bug 675524.
test_create_delete() assumes that if it creates a file and then
immediately deletes it, that the file monitor will notice this and
record it as a create followed by a delete. But that won't work with
GPollFileMonitor, which will just think nothing changed. So skip the
test in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=669331
The extra newline chars in the local implementation of g_application_command_line_print and g_application_command_line_printerr() cause an unwanted newline after printed strings. This patch removes the newline chars to make the functions consistent with their documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=680459
* A certificate sorta acts as a public key, but more specifically
it contains a public key (in its subjectPublicKeyInfo) field.
* Documentation was confusing and could have read like the
certificate and certificate-pem properties were returning the
public key part of the certificate.
https://bugzilla.gnome.org/show_bug.cgi?id=681158
GThreadPool defaulted to 0 for max_unused_threads (meaning thread-pool
threads would exit immediately if there was not already another task
waiting for them), and 0 for max_idle_time (meaning unused threads
would linger forever, though this is only relevant if you changed
max_unused_threads).
However, GIOScheduler changed the global defaults to 2 and 15*1000,
respectively, arguing that these were more useful defaults. And they
are, so let's use them.
https://bugzilla.gnome.org/show_bug.cgi?id=661767
When creating a directory fails for some reason other than
the parent not existing, don't clear the error before we try
to propagate it.
To reproduce, run 'ostadmin init' on /ostree or otherwise try to
run the function on a directory with a parent directory where the
current user is not allowed to write.
https://bugzilla.gnome.org/show_bug.cgi?id=680823
This looks like it was stubbed out but not implemented; the vtable
entry dates to commit 3781343738 which
is just alex's initial merge of gio into glib.
I was working on some code that wants an asynchronous rm -rf
equivalent, and so yeah, this is desirable.
https://bugzilla.gnome.org/show_bug.cgi?id=680760
gcontenttype.c was split into gcontenttype.c and gcontenttype-win32.c
in commit 32192ee9 ("Split gcontenttype.c"), so we don't want to include
gcontenttype.c in the Visual C++ build as it is no longer a source file
meant for Windows.
Thanks to Thomas H.P. Anderson for pointing this out.
Add a test that the decompressor input streams handle truncated data
correctly. (They do; I wrote the test thinking there was a bug there,
but there isn't.)
Also, rename the "corruption" tests to "roundtrip", since "corruption"
makes it sound like we're testing how the converters deal with
corrupted data, as opposed to merely testing that they don't corrupt
data themselves. And fix the bug reference.
Rather than implementing GCancellableSource by polling on its fd,
implement it by just waking its GMainContext up from the "cancelled"
signal handler, thereby helping to reduce file descriptor usage.
Suggested by Ryan Lortie.
https://bugzilla.gnome.org/show_bug.cgi?id=680121
* GCancellable can be "cancelled" more than once if
g_cancellable_reset() is called.
* Don't assume that because the "cancelled" signal fired
it won't fire again.
https://bugzilla.gnome.org/show_bug.cgi?id=680111
g_async_initable_real_init_finish() was previously handling all
GSimpleAsyncResults, even if they weren't created by
g_async_initable_real_init_async(), and libnm-glib accidentally relied
on that behavior. So remove the g_simple_async_result_is_valid()
check.
Many (if not "almost all") programs that spawn other programs via
g_spawn_sync() or the like simply want to check whether or not the
child exited successfully, but doing so requires use of
platform-specific functionality and there's actually a fair amount of
boilerplate involved.
This new API will help drain a *lot* of mostly duplicated code in
GNOME, from gnome-session to gdm. And we can see that some bits even
inside GLib were doing it wrong; for example checking the exit status
on Unix, but ignoring it on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=679691
Rather than doing a two step first-check-the-GAsyncResult-subtype-then-
check-the-tag, add a GAsyncResult-level method so that you can do them
both at once, simplifying the code for "short-circuit" async return
values where the vmethod never gets called.
https://bugzilla.gnome.org/show_bug.cgi?id=661767
Finish deprecating the "handle GSimpleAsyncResult errors in the
wrapper function" idiom (and protect against future GSimpleAsyncResult
deprecation warnings) by adding a "legacy" GAsyncResult method
to do it in those classes/methods where it had been traditionally
done.
(This applies only to wrapper methods; in cases where an _async
vmethod explicitly uses GSimpleAsyncResult, its corresponding _finish
vmethod still uses g_simple_async_result_propagate_error.)
https://bugzilla.gnome.org/show_bug.cgi?id=667375https://bugzilla.gnome.org/show_bug.cgi?id=661767
Originally, the standard idiom with GSimpleAsyncResult was to handle
all errors in the _finish wrapper function, so that vmethods only had
to deal with successful results. But this means that chaining up to a
parent _finish vmethod won't work correctly. Fix this by also checking
for errors in all the relevant vmethods. (We have to redundantly check
in both the vmethod and the wrapper to preserve compatibility.)
https://bugzilla.gnome.org/show_bug.cgi?id=667375https://bugzilla.gnome.org/show_bug.cgi?id=661767
The "mainloop_barrier" in copy_async_thread() is unnecessary, since
the g_simple_async_result_complete_in_idle() will be queued after all
of the g_io_scheduler_job_send_to_mainloop_async()s, and sources with
the same priority will run in the order in which they were queued.
https://bugzilla.gnome.org/show_bug.cgi?id=661767
The in commit b79fbc5c3f for fixing
-Wstrict-aliasing warnings was a little too brutal, make it a bit
better.
Signed-off-by: David Zeuthen <zeuthen@gmail.com>
Prevent attempts to access keys ending with slashes that exist in the
schema file as references to child schemas.
Also: don't emit change signals for these same keys.
For a D-Bus property with name "Type" (fairly common), we used to
generate a GObject property with name "type-" and C accessors
get_type_() (to avoid clashing with the GType getter), set_type_()
(for symmetri).
However, the rules for GObject property names are fairly rigid and
specifically prohibit names ending in a dash.
Therefore change things so the chosen GObject property name is "type"
but preserve the naming rules for the C getter and setter (for the
same reasons: avoiding name clashing and symmetri).
This change does break the API of generated code (but only on the
GObject property level, the C symbols are not changed) but strictly
speaking the behavior was undefined since "type-" was an invalid
GObject property name.
Also add a test case for this.
Bug 679473.
https://bugzilla.gnome.org/show_bug.cgi?id=679473
Signed-off-by: David Zeuthen <zeuthen@gmail.com>
Most changes were just replacing usage of "has_key" with "in".
Also updated the sorting function which was simplified and
changed to a "key" function instead of "cmp" (which is no longer
supported in python3. Verified everything builds with
python 2.7 and 3.
https://bugzilla.gnome.org/show_bug.cgi?id=678066
After fixing bug 674452 this test case now reliably fails, as "ABC abc" is text
and definitively not PowerPoint. It previously worked as g_content_type_guess()
was reading beyond the boundary of the data due to specifying -1 as data
length.
Update that test case to expect a PO template instead, and add two more with a
definitive PO template syntax and some binary data. We do not currently have a
MIME magic for PowerPoint, so we cannot actually detect it with certainty, but
at least make sure that the returned MIME type is correct.
https://bugzilla.gnome.org/show_bug.cgi?id=678941
We need to ignore the defaults.list item only when there
was a mimetype handler found in a previous mimetype, not
if one was found for the same mimetype as the one that
is listed in defaults.list (same for the new-style defaults).
There was an issue when looking up the default handler
for a type where a supertype was listed in defaults.list.
We would pick the default for the parent type even if
there was a handler for the more specific type.
In the case of the new-style defaults marking (
"Default Applications" in mimeapps.list) we were already
checking for a more specific handler befor using a default,
but we also need to do a similar check for the defaults.list
case.
https://bugzilla.gnome.org/show_bug.cgi?id=678944
g_content_type_guess() requires specifying a valid data length. Fixes a
segfault when running the test.
Also add an explicit check for this and return XDG_MIME_TYPE_UNKNOWN when
data_size is specified as -1, to avoid crashing.
https://bugzilla.gnome.org/show_bug.cgi?id=674452
Sometimes the poll duration in the /socket/timed_wait test is slightly lower
than the requested 100000, causing failures like
ERROR:/build/buildd/glib2.0-2.33.2/./gio/tests/socket.c:619:test_timed_wait:
assertion failed (poll_duration > = 100000): (99240 >= 100000)
FAIL
Adjust the test to also allow some jitter in the "too small" direction, similar
to the already existing span for "slightly too large".
https://bugzilla.gnome.org/show_bug.cgi?id=678881
In general, code using g_slist_delete_link() is broken, because it
potentially requires an O(n) traversal. Just switch to GList in this
case.
The performance hit here was exacerbated by the fact that we were
holding a mutex that needed to be accessed by all threads.
https://bugzilla.gnome.org/show_bug.cgi?id=678576
make sure the proxy threads are in the "waiting for a connection"
state when we do the final cleanup, or else there are race conditions
involving which thread processes the GCancellable cancellation first.
The bash-completion code nowadays expects completion files to
be installed in /usr/share/bash-completion/completions, and
expects them to be named like the command they are completing
for.
https://bugzilla.gnome.org/show_bug.cgi?id=677782
-gconverterinputstream.c: Avoid GCCism by not using non-standard pointer
arithmetic on void*, but do a cast to char * as that seems to be what the
variable was used for.
-gtestdbus.c: Don't include unistd.h unconditionally, and use g_usleep()
instead of usleep(), as usleep() is not universally available.
The "-framework" linker flag takes a second word as a parameter. If
they are passed separated with whitespace, some flag-handling routines
may not know to keep the two words together as a single unit. Use
-Wl,, to pass multiple words without embedded whitespace.
https://bugzilla.gnome.org/show_bug.cgi?id=566994
Reading from a GConverterInputStream with both input_buffer and
converted_buffer non-empty would return bogus data (the data from
converted_buffer would essentially get skipped over, though the
returned nread reflected what the count would be if it hadn't been).
This was never noticed before because (a) it can't happen if all of
your reads are at least as large as either the internal buffer size or
the remaining length of the stream (which covers most real-world use),
and (b) it can't happen if all of your reads are 1 byte (which covers
most of tests/converter-test). (And (c) it only happens for some
converters/input streams.) But this was happening occasionally in
libsoup when content-sniffing a gzipped response, because the
SoupContentSnifferStream would first read 512 bytes (to sniff), and
then pass through larger reads after that.
Fixed and added a test to converter-test.
https://bugzilla.gnome.org/show_bug.cgi?id=676478
When the application is using its D-Bus backend, it is useful to be able
to export extra D-Bus objects at the right time, i.e. *before* the application
tries to own the bus name. This is accomplished here by adding a hook
in GApplicationClass for this; and a corresponding hook that will be called
on unregistration to undo whatever the register hook did.
Bug #675509.
I didn't do this comprehensively, since there's a lot of it, mainly
due to the GDBus object manager stuff, but anyone trying to use
that would fail fast due to lack of the gdbus code generator.
My main goal was to get API additions to existing classes like
g_data_input_stream_read_line_utf8(), as well as the lower level new
API like glib-unix.h.
https://bugzilla.gnome.org/show_bug.cgi?id=676816
Using a caller-supplied buffer for g_input_stream_read() doesn't
translate well to the semantics of many other languages, and using a
non-refcounted buffer for read_async() and write_async() makes it
impossible to manage the memory correctly currently in
garbage-collected languages.
Fix both of these issues by adding a new set of methods that work with
GBytes objects rather than plain buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=671139
Rather than depending on the host's DNS configuration to properly
return an error for a non-existent hostname, just substitute in
a dummy GResolver implementation that does it for us.
GFile doesn't handle some "real" URIs, so check if there's a default
handler for the URI scheme first, and only use g_file_new_for_uri()
and g_file_query_default_handler() if not. Eg, this fixes the case of
opening http URIs with "%2F" in the path.
https://bugzilla.gnome.org/show_bug.cgi?id=666386
This essentially adds an accessor for the MimeType field in desktop files,
to retrieve the list of all mime types supported by an application.
The interface though is part of GAppInfo, so it could be implemented
in the future by other backends.
https://bugzilla.gnome.org/show_bug.cgi?id=674111
The logic here is pretty twisted, but basically we were leaking a ref
for each non-existent parent. The clearest way to fix this was to
move to more explicit refcounting logic; when a variable is pointing
to an object, it holds a ref.
https://bugzilla.gnome.org/show_bug.cgi?id=675446
Provide public access to the GDBusConnect and object path that
GApplication is using. Prevents others from having to guess these
things for themselves based on the application ID.
https://bugzilla.gnome.org/show_bug.cgi?id=671249
g_output_stream_write_async() was not initializing the newly-added
members of the WriteData structure, causing various problems.
Also, g_input_stream_read_async() was now leaking its cancellable. Fix
that as well.
https://bugzilla.gnome.org/show_bug.cgi?id=674612
If the launch context is a GAppLaunchContext, and not a
GdkAppLaunchContext, then g_app_launch_context_get_display will return
NULL because the get_display virtual method is undefined. The DISPLAY
might still be inherited from the parent process, in which case
overwriting it with NULL breaks the launch.
This is a regression introduced in:
de834bed30
Fixes: https://bugzilla.gnome.org/672786
Commit f084b60377 incorrectly set
DIST_SUBDIRS for the toplevel Makefile.am. In general actually we
don't need to set it, because modern automake automatically sets
it by looking at conditionals for SUBDIRS.
Tested-by: Rico Tzschichholz <ricotz@t-online.de>
https://bugzilla.gnome.org/show_bug.cgi?id=667806
If all members of GSocketFamily are supported on the platform, then
all of its values will be positive, and so the enum might become
unsigned, in which case testing for "family < 0" might cause warnings.
But we want to return an error if family == 0 (aka
G_SOCKET_FAMILY_INVALID) anyway, so just tweak the test accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=674592
gdbus-daemon-generated.[ch] failed to build because it depended
on gdbus-2.0/codegen/gdbus-codegen which was build during the SUBDIRS part
of the build, however SUBDIRS are done *after* processing BUILT_SOURCES,
and these files are in BUILT_SOURCES.
The fix is simple, instead of running the gdbus-codegen code we
run the gdbus-codegen.in code, which works fine for uninstalled execution.
I also removed Makefile from the dependencies to avoid rebuilding the file
in tarballs, as Makefiles are written at configure time. We should be able to
ship the prebuilt files in the tarballs.
When running uninstalled
Add two new methods to GProxyAddress for recovering information about
the destination URI that the proxy was created for (and modify
GProxyAddressEnumerator to set that information when creating the
GProxyAddress).
In the async case, a failed DNS lookup was causing the proxy
resolution to bail out immediately, rather than just moving on to the
next potential proxy (which might not need us to do the DNS lookup
beforehand). Fix that.
This is mostly complete, sans support for activation. However, its
not as picky as the libdbus implementation in terms like validation
and limits checking, nor is it as tested.
Its can be useful to test gdbus if dbus-daemon is not availible, but
its main reason for existance is to implement a default session bus
on win32 so that e.g. GApplication is guaranteed to work.
If a GInputStream does not provide a read_async() implementation, but
does implement GPollableInputStream, then instead of doing
read-synchronously-in-a-thread, just use
g_pollable_input_stream_read_nonblocking() and
g_pollable_input_stream_create_source() to implement an async read in
the same thread. Similarly for GOutputStream.
Remove a bunch of existing read_async()/write_async() implementations
that are basically equivalent to the new fallback method.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
Implement GPollableInputStream in GMemoryInputStream and
GConverterInputStream, and likewise implement GPollableOutputStream in
the corresponding output streams.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
Move g_pollable_source_new() here from gpollableinputstream.c, add
g_pollable_source_new_full(), and add some new methods to do either
blocking or nonblocking reads depending on a boolean argument.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
Make g_pollable_input_stream_read() and
g_pollable_output_stream_write() look a little bit more like the
non-pollable versions in terms of error handling, etc. Also, use the
read_fn and write_fn virtual methods directly rather than calling
g_input_stream_read()/g_output_stream_write(), to avoid problems with
re-entrancy involving the "pending" flag.
Also belatedly add single-include guards to the header files.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
The loop was using a GConverterResult variable where it meant to use a
gssize, and since GConverterResult was ending up as an unsigned type,
this meant the (res < 0) check always failed.
Resources are always little endian, so the gvdb is byteswapped. When looking
up the value, it would return a new byteswapped variant, making the data
returned from do_lookup() invalid once that variant is unref'd. Since
byteswapping doesn't matter for the "ay" data anyway, just use
gvdb_table_get_raw_value() instead and only byteswap the length and flag
values.
https://bugzilla.gnome.org/show_bug.cgi?id=673409
* Add resolver functions for looking up DNS records of
various types. Currently implemented: MX, TXT, SOA, SRV, NS
* Return records as GVariant tuples.
* Make the GSrvTarget lookups a wrapper over this new
functionality.
* Rework the resolver test so that it has support for
looking up MX, NS, SOA, TXT records, and uses GOptionContext
https://bugzilla.gnome.org/show_bug.cgi?id=672944
This patch solves two problems:
First, it allows builders to optionally cut the circular dependency
between dbus and glib by disabling the modular tests (just like how
the tests can be disabled in dbus).
Second, the tests are entirely pointless to build if cross-compiling.
It also moves us slightly closer to the long term future we want where
the tests are a separate ./configure invocation and run against the
INSTALLED glib, not the one in the source tree. This would allow us to
run the tests constantly, not just when glib is built.
https://bugzilla.gnome.org/show_bug.cgi?id=667806
For quite some time the recommended usage of GSettings and dconf has
been to use paths like /org/gnome/example/. Use of /apps/ has spilled
over from GConf and is continuing to make its way into a number of
applications as they port.
glib-compile-schemas will now warn about these types of paths being
used. This generates a lot of noise, but hopefully it will reduce the
number of ported applications making this mistake.
Turns out libdbus doesn't send struct ucred credentials on linux, but
just relies on the SO_PEERCRED support. However, gdbus does send, and
expect to recieve a ucred credential. So, when libdbus talks to a
gdbus server the authentication fails to send the credentials.
We fix this by falling back to g_socket_get_credentials() if we don't
get any credential messages.
When presented with an array of empty arrays of 8-byte-aligned types,
GDBus would incorrectly apply the 8-byte alignment when reading back.
https://bugzilla.gnome.org/show_bug.cgi?id=673612
Signed-off-by: David Zeuthen <davidz@redhat.com>
D-Bus arrays are serialized as follows:
1. align to a 4-byte boundary (for the length)
2. uint32: the length of the serialized body in bytes
3. padding for the alignment of the body type (not included in the length)
4. the body.
Note that 3. is a no-op unless the body type is an 8-byte aligned type
(uint64, int64, double, struct, dict_entry), since you are always on a
4-byte boundary from aligning and writing the length.
So, an empty aax (that is, an array containing zero arrays of int64)
is serialized as follows:
1. align to a 4-byte boundary
2. length of the contents of this (empty) array, in bytes (0)
3. align to a 4-byte boundary (the child array's alignment requirement)
4. there is no body.
But previously, GDBus would recurse in step three to align not just for
the type of the child array, but for the nonexistent child array's
contents. This only affects the algorithm when the grandchild type has
8-byte alignment and the reader happened to not already be on an 8-byte
boundary, in which case 4 bytes were spuriously skipped.
https://bugzilla.gnome.org/show_bug.cgi?id=673612
Signed-off-by: David Zeuthen <davidz@redhat.com>
The code that is checking the userinfo part was accidentally
given a pointer to the end of the userinfo, so it was not
checking the right portion of the string at all.
gio/gproxyresolver.h: GProxyResolver already documented in gio/giotypes.h
gio/gtlsbackend.h: GTlsBackend already documented in gio/gtlsbackend.c
gio/gtlsclientconnection.h: GTlsClientConnection already documented in gio/gtlsclientconnection.c
gio/gtlsconnection.h: GTlsConnection already documented in gio/gtlsconnection.c
gio/gunixconnection.h: GTcpConnection already documented in gio/giotypes.h
glib/gversion.h: GLIB_CHECK_VERSION already documented in glib/gversion.c
Found these thanks to the improved gobject-introspection
GTK-Doc comment block/annotation parser.
See https://bugzilla.gnome.org/show_bug.cgi?id=672254https://bugzilla.gnome.org/show_bug.cgi?id=673385
GDBus heavily relies on idles for some of its cleanup operations,
and not running a mainloop leads to things not getting cleaned
up properly, which in turn leads to test failures, since the
session bus singleton does not get removed.
This program is only used indirectly from gapplication.c in
tests, but that is no reason to let it segfault when it is
run from the commandline without arguments.
This is needed because glib-mkenums doesn't handle #ifdef values in
enums, and so it needs to have all values always defined in the enum.
When not available, define the missing values to a negative value.
g_input_stream_read() does state that it returns 0 on end of file, but
not in the Returns: line, so it's easy to miss on a quick skim-read.
g_input_stream_read_async() documents that g_input_stream_read_finish()
returns 0 on end of file, but g_input_stream_read_finish() itself does
not.
https://bugzilla.gnome.org/show_bug.cgi?id=673174
On some systems gelf.h may not be stored under the top level include
directory in which case we need to add the correct include paths in
cflags by using pkg-config(1).
GDBusProxy sets an error on a GSimpleAsyncResult and then returns
without dispatching the result for completion (and leaks the result in
the process). Fix that.
Also add a testcase. Unfortunately, adding the testcase uncovered
bug #672248. We can work around that by reordering the tests.
https://bugzilla.gnome.org/show_bug.cgi?id=672249
When building with MinGW/MSYS with srcdir != builddir the build fails:
- to locate the generated .def files
- creating libglib-gdb.py
- creating libgobject-gdb.py
Solved this by explicitly instructing these files to be generated
in $(builddir)/...
https://bugzilla.gnome.org/show_bug.cgi?id=653167
Now that we're using g_simple_async_result_set_check_cancellable() we
no longer need this terrible hack of carrying the GCancellable on the
GSimpleAsyncResult using qdata. See bug 672013 for more details.
https://bugzilla.gnome.org/show_bug.cgi?id=672013
Signed-off-by: David Zeuthen <davidz@redhat.com>
Call g_simple_async_result_set_check_cancellable() after all
GSimpleAsyncResult creation in order to take advantage of the new
reliable cancellation feature.
The guarantee of reliable cancellation fixes a bug in dbusmenu (which
was already assuming that cancellation was reliable). See this bug:
https://bugs.launchpad.net/ubuntu/+source/libdbusmenu/+bug/953562https://bugzilla.gnome.org/show_bug.cgi?id=672013
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add a function g_simple_async_result_set_check_cancellable() to provide
a GCancellable that is checked for being cancelled during the call to
g_simple_async_result_propagate_error().
This gives asynchronous operation implementations an easy way to
provide reliable cancellation of those operations -- even in the case
that a positive result has occured and is pending dispatch at the time
the operation is cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=672013
If there are no modules installed then the most appropriate thing is to
have no cachefile instead of an empty one. This unbreaks the "clean
directory after 'make uninstall'" check that automake does.
https://bugzilla.gnome.org/show_bug.cgi?id=671664
Otherwise we get criticals a'la
GLib-GIO-CRITICAL **: g_cancellable_release_fd: assertion `cancellable->priv->fd_refcount > 0' failed
when reading/writing to certain kinds of file descriptors.
Patch reviewed by Dan Winship on IRC.
Signed-off-by: David Zeuthen <davidz@redhat.com>
We were attempting to unregister our ownership of our D-Bus name even in
the case that we were non-unique (ie: we didn't actually own the name).
Rework the logic a bit to prevent that: for non-unique, we leave
impl->bus_name as NULL and we only register/unregister if it is
non-NULL.
If an application (such as Nautilus) wants to show a sidebar with
devices group into different groups such as "Devices" and "Network",
it's currently up to the application itself to do the classification
(for example by looking at the URI scheme for the activation root,
e.g. smb://).
This patch adds a new identifier G_VOLUME_IDENTIFIER_KIND_CLASS that
can be set by volume monitors and used by applications.
See https://bugzilla.gnome.org/show_bug.cgi?id=668295
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add new macros to disable -Wdeprecated-declarations around a piece of
code, using the C99 (and GNU89) _Pragma() operator. Replace the
existing use of #pragma for this in gio, and suppress the warnings in
gvaluearray.c as well.
https://bugzilla.gnome.org/show_bug.cgi?id=669671
Unix and Windows gio GSocket behaves differently when the socket is
closed by the peer. On Unix, the client receives pending data before
receiving HUP. But on Windows, the HUP may come before, resulting in
unreliable and racy code. We should have same behaviour on all
platforms.
According to MSDN documentation: "an application should check for
remaining data upon receipt of FD_CLOSE to avoid any possibility of
losing data."
https://bugzilla.gnome.org/show_bug.cgi?id=669810
For a number of reasons it might be useful to register the object paths
associated with a non-unique application so that the application can at
least field requests to its unique D-Bus name.
https://bugzilla.gnome.org/show_bug.cgi?id=647986
g_file_read() was returning G_IO_ERROR_IS_DIRECTORY when you tried to
open a directory on unix, but G_IO_ERROR_PERMISSION_DENIED on win32.
Fix that, and add a test to tests/file.c
Pointed out on IRC by Paweł Forysiuk.
https://bugzilla.gnome.org/show_bug.cgi?id=669330
This is useful when using certain D-Bus services where the
PropertiesChanged signal does not include the property value such as
e.g. various systemd mechanisms, see e.g.
https://bugs.freedesktop.org/show_bug.cgi?id=37632
Signed-off-by: David Zeuthen <davidz@redhat.com>
==1265== 84 (8 direct, 76 indirect) bytes in 1 blocks are definitely lost in loss record 793 of 827
==1265== at 0x4029467: calloc (vg_replace_malloc.c:467)
==1265== by 0x408479B: standard_calloc (gmem.c:104)
==1265== by 0x4084846: g_malloc0 (gmem.c:189)
==1265== by 0x4084B2D: g_malloc0_n (gmem.c:385)
==1265== by 0x4228A98: g_resource_load (gresource.c:253)
==1265== by 0x804A56D: test_resource_registred (resources.c:198)
==509== 700 (20 direct, 680 indirect) bytes in 1 blocks are definitely lost in loss record 828 of 837
==509== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==509== by 0x4084724: standard_malloc (gmem.c:85)
==509== by 0x40847C7: g_malloc (gmem.c:159)
==509== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==509== by 0x405396B: g_bytes_new_with_free_func (gbytes.c:173)
==509== by 0x405390D: g_bytes_new_take (gbytes.c:122)
==509== by 0x804A48C: test_resource_data (resources.c:174)
==29204== 11,456 (84 direct, 11,372 indirect) bytes in 1 blocks are definitely lost in loss record 859 of 861
==29204== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==29204== by 0x4084724: standard_malloc (gmem.c:85)
==29204== by 0x40847C7: g_malloc (gmem.c:159)
==29204== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==29204== by 0x409B227: g_slice_alloc0 (gslice.c:1029)
==29204== by 0x41936CF: g_type_create_instance (gtype.c:1872)
==29204== by 0x417CCC9: g_object_constructor (gobject.c:1839)
==29204== by 0x417C6F4: g_object_newv (gobject.c:1703)
==29204== by 0x417CC5A: g_object_new_valist (gobject.c:1820)
==29204== by 0x417C1DB: g_object_new (gobject.c:1535)
==29204== by 0x41E5E29: g_converter_input_stream_new (gconverterinputstream.c:204)
==29204== by 0x4228D38: g_resource_open_stream (gresource.c:363)
This bug was exposed by fixing the following leak in the resources test:
==29204== 11,456 (84 direct, 11,372 indirect) bytes in 1 blocks are definitely lost in loss record 859 of 861
==29204== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==29204== by 0x4084724: standard_malloc (gmem.c:85)
==29204== by 0x40847C7: g_malloc (gmem.c:159)
==29204== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==29204== by 0x409B227: g_slice_alloc0 (gslice.c:1029)
==29204== by 0x41936CF: g_type_create_instance (gtype.c:1872)
==29204== by 0x417CCC9: g_object_constructor (gobject.c:1839)
==29204== by 0x417C6F4: g_object_newv (gobject.c:1703)
==29204== by 0x417CC5A: g_object_new_valist (gobject.c:1820)
==29204== by 0x417C1DB: g_object_new (gobject.c:1535)
==29204== by 0x41E5E29: g_converter_input_stream_new (gconverterinputstream.c:204)
==29204== by 0x4228D38: g_resource_open_stream (gresource.c:363)
==29204== 7,192 (76 direct, 7,116 indirect) bytes in 1 blocks are definitely lost in loss record 855 of 861
==29204== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==29204== by 0x4084724: standard_malloc (gmem.c:85)
==29204== by 0x40847C7: g_malloc (gmem.c:159)
==29204== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==29204== by 0x409B227: g_slice_alloc0 (gslice.c:1029)
==29204== by 0x41936CF: g_type_create_instance (gtype.c:1872)
==29204== by 0x417CCC9: g_object_constructor (gobject.c:1839)
==29204== by 0x417C6F4: g_object_newv (gobject.c:1703)
==29204== by 0x417CC5A: g_object_new_valist (gobject.c:1820)
==29204== by 0x417C1DB: g_object_new (gobject.c:1535)
==29204== by 0x424E815: g_zlib_decompressor_new (gzlibdecompressor.c:270)
==29204== by 0x4228DD8: g_resource_lookup_data (gresource.c:422)
==28778== 700 (20 direct, 680 indirect) bytes in 1 blocks are definitely lost in loss record 842 of 863
==28778== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==28778== by 0x4084724: standard_malloc (gmem.c:85)
==28778== by 0x40847C7: g_malloc (gmem.c:159)
==28778== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==28778== by 0x405396B: g_bytes_new_with_free_func (gbytes.c:173)
==28778== by 0x405390D: g_bytes_new_take (gbytes.c:122)
==28778== by 0x804C2B1: test_uri_query_info (resources.c:435)
==28318== 38 (12 direct, 26 indirect) bytes in 1 blocks are definitely lost in loss record 613 of 865
==28318== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==28318== by 0x4084724: standard_malloc (gmem.c:85)
==28318== by 0x40847C7: g_malloc (gmem.c:159)
==28318== by 0x4084AB4: g_malloc_n (gmem.c:361)
==28318== by 0x4229599: g_resources_enumerate_children (gresource.c:806)
==28318== by 0x804B39E: test_resource_registred (resources.c:283)
==27820== 31 bytes in 1 blocks are definitely lost in loss record 587 of 866
==27820== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==27820== by 0x4084724: standard_malloc (gmem.c:85)
==27820== by 0x40847C7: g_malloc (gmem.c:159)
==27820== by 0x4084AB4: g_malloc_n (gmem.c:361)
==27820== by 0x409D6A1: g_strdup (gstrfuncs.c:356)
==27820== by 0x4069FF7: g_get_current_dir (gfileutils.c:2544)
==27820== by 0x804BCA7: test_resource_module (resources.c:370)
==27020== 44 (24 direct, 20 indirect) bytes in 1 blocks are definitely lost in loss record 684 of 936
==27020== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==27020== by 0x4084724: standard_malloc (gmem.c:85)
==27020== by 0x40847C7: g_malloc (gmem.c:159)
==27020== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==27020== by 0x40BC038: g_variant_get_child_value (gvariant-core.c:969)
==27020== by 0x40B5277: g_variant_get_variant (gvariant.c:749)
==27020== by 0x4273182: gvdb_table_value_from_item (gvdb-reader.c:478)
==27020== by 0x42731E8: gvdb_table_get_value (gvdb-reader.c:509)
==27020== by 0x4228B36: do_lookup (gresource.c:280)
==27020== by 0x4228F56: g_resource_get_info (gresource.c:492)
==26427== 24 bytes in 1 blocks are definitely lost in loss record 608 of 965
==26427== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==26427== by 0x4084724: standard_malloc (gmem.c:85)
==26427== by 0x40847C7: g_malloc (gmem.c:159)
==26427== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==26427== by 0x40BC038: g_variant_get_child_value (gvariant-core.c:969)
==26427== by 0x40BA89F: g_variant_valist_get (gvariant.c:4482)
==26427== by 0x40BAC23: g_variant_get_va (gvariant.c:4681)
==26427== by 0x40BAB29: g_variant_get (gvariant.c:4633)
==26427== by 0x4228BA5: do_lookup (gresource.c:293)
==26427== by 0x4228F51: g_resource_get_info (gresource.c:493)
Helper scripts in C can be problematic for cross compiling: the compiler
produces executables for the target platform, which the host is usually
unable to run.
https://bugzilla.gnome.org/show_bug.cgi?id=669224
The glib-compile-resources --generate-dependencies call was failing,
although not stopping the build.
Failed to open file 'test2.gresource.xml': No such file or directory
Failed to open file 'test3.gresource.xml': No such file or directory
Failed to open file 'test4.gresource.xml': No such file or directory
Failed to open file 'test.gresource.xml': No such file or directory
We need to do this because constructors run before main() and
thus before any call to g_mem_set_vtable, making it impossible to
use that function if constructors call g_malloc.
We do this by making the constructors just register the static data
for lazy registration, doing the lazy registration when using
the global resource set.
With this we're not longer exporting the constructor headers, which means
we're not tying ourselves to a macro that might need special tweaking on
a compiler-by-compiler basis.
It's important to have strict rules for handling of whitespace in
translated strings in GSettings schema files so that the tools
extracting the messages will end up with the same messages as the
runtime calling gettext().
The rules are designed to be simple and unambiguous yet cover most
normal uses in a convenient way.
Those rules are as follows (with rationale):
- for <default> tags, the text content has its leading and trailing
whitespace stripped off, but internal whitespace is not modified in
any way.
This allows for slightly more flexible use of whitespace without
causing that whitespace to appear in the strings for translation.
- for <summary> and <description> tags, the content is split into
paragraphs. Paragraphs are separated by two or more sequential
newline characters. Each paragraph has its leading and trailing
whitespace removed and all other whitespace is normalised to a
single ascii space character. Finally, the paragraphs are rejoined,
inserting exactly two newlines between them.
This allows for longer explanations (particularly in the description
tag) using a natural format that, when normalised, will display
nicely in toolkits.
This patch implements the rules for <default> tags. The schema compiler
currently ignores <summary> and <description> tags.
First, correct a rather dubious case of accessing a GSettingsSchemaKey
after clearing it. This was technically okay because only the key name
was accessed (and it is not owned by the struct) but it looks very
wrong.
Second, have g_settings_backend_write() sink the passed in GVariant*.
Not all backends get this right, and I'm starting to like the pattern of
virtual function wrappers being responsible for sinking the parameters
that they are documented as consuming.
GValueArray was deprecated in bug 667228 and since we never change the
size of the array, it was kinda dumb to just GValueArray in the first
place.
https://bugzilla.gnome.org/show_bug.cgi?id=667228
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is needed for thread-safety ... yes, it would have been better to
make get_object() return a full reference and have something like a
peek_object() method return a borrowed reference for C convenience
(only a single vfunc would have been needed). But such an ABI break is
too late now...
Signed-off-by: David Zeuthen <davidz@redhat.com>
It's hardly useful to bloat the resource data with blanks intended only
for human readability, so add a preprocessing option that uses xmllint --noblanks
to strip these.
Bug #667929.
Some platforms don't have the source-specific multicast sockopts, and
so would fail to compile. Fix that (and return an error if the caller
tries to use source-specific). Also clarify the docs a bit.
https://bugzilla.gnome.org/show_bug.cgi?id=668468
This lets you poke at resources in elf files and
standalone resource bundles. So far, only listing
and extracting resources is supported. The support
for elf files requires libelf.
g_settings_create_action() will create a GAction for the named key,
allowing it to be added to the action group of the application (so that
the setting can be directly manipulated from menus, for example).
https://bugzilla.gnome.org/show_bug.cgi?id=668279
glib-compile-schemas used to generate these. They're harmless and they
mean that no schemas are installed in a particular directory, so just
ignore them.
https://bugzilla.gnome.org/show_bug.cgi?id=656301
==13007== 173 bytes in 1 blocks are definitely lost in loss record 90 of 106
==13007== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==13007== by 0x407DDBA: standard_malloc (gmem.c:85)
==13007== by 0x407E318: g_try_malloc (gmem.c:271)
==13007== by 0x40654DE: g_file_get_contents (gfileutils.c:756)
==13007== by 0x804A531: main (glib-compile-resources.c:580)
==13007== 521 (56 direct, 465 indirect) bytes in 1 blocks are definitely lost in loss record 100 of 106
==13007== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==13007== by 0x407DDBA: standard_malloc (gmem.c:85)
==13007== by 0x407E160: g_malloc (gmem.c:159)
==13007== by 0x4091D8D: g_slice_alloc (gslice.c:1003)
==13007== by 0x40674A1: g_hash_table_new_full (ghash.c:676)
==13007== by 0x804B252: gvdb_hash_table_new (gvdb-builder.c:76)
==13007== by 0x43C66B2: (below main) (libc-start.c:226)
g_bus_get_finish() and g_bus_get_sync() both document that the returned
object will usually have exit-on-close set to TRUE, but the property's
documentation specified that its default is FALSE. While that's
technically true from a GObject perspective, it's not accurate from the
API user's perspective.
https://bugzilla.gnome.org/show_bug.cgi?id=668163
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: David Zeuthen <zeuthen@gmail.com>
Initial underscores are used in c identifier to make them private,
for instance in Gtk+. However, we don't want to have this in the
resource section name, that just looks ugly.
Apparently IPV6_JOIN_GROUP and IPV6_LEAVE_GROUP are more portable than
IPV6_ADD_MEMBERSHIP and IPV6_DROP_MEMBERSHIP. (Windows and Linux have
both, but OS X only has the latter.)
struct sin6_addr has two additional fields that struct sin_addr
doesn't. Add support for those to GInetSocketAddress, and make sure
they don't get lost when converting between glib and native types.
https://bugzilla.gnome.org/show_bug.cgi?id=635554
If a class implements GAsyncInitable, and its parent also implements
it, then the subclass needs to call its parent's init_async() before
running its own. This was made more complicated by the fact that the
default init_finish() behavior was handled by the wrapper method
(which can't be used when making the super call) rather than the
default implementation itself. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=667375
When the flags enum only has the default NONE = 0 entry, glib-mkenums
creates an enum type for it, not a flags type. Add an annotation to the
enum to ensure the correct GType is created.
Bug #667938.
GResource is a bundle of files combined into a single binary blog.
The API lets you access the files the resource contains by
using resource paths. You can also register resources with a
global list and access these globally in a merged resource namespace.
The normal way this is used is to link in the resources into your
application/library and have it be automatically registred.
Resources are compiled from an xml description using
glib-compile-resources.
This is implemented by with statfs_buffer.f_bavail (free blocks
for unprivileged users) as a default way to retrieve real free space.
Based on a patch by Marcus Carlson, bug 625751.
g_socket_receive_with_blocking() and g_socket_send_with_blocking claim
to return -1 in error, their return type is gssize, and yet they
return FALSE if the initial g_return_val_if_fail() call fails.
https://bugzilla.gnome.org/show_bug.cgi?id=667226
==24706== 52 bytes in 1 blocks are definitely lost in loss record 7,248 of 13,092
==24706== at 0x4A074CD: malloc (vg_replace_malloc.c:236)
==24706== by 0x70E9F5F: standard_malloc (gmem.c:85)
==24706== by 0x70E9FE8: g_malloc (gmem.c:159)
==24706== by 0x71018EC: g_slice_alloc (gslice.c:1003)
==24706== by 0x710192B: g_slice_alloc0 (gslice.c:1029)
==24706== by 0x7068526: g_type_create_instance (gtype.c:1872)
==24706== by 0x705067B: g_object_constructor (gobject.c:1835)
==24706== by 0x704FE47: g_object_newv (gobject.c:1699)
==24706== by 0x7050612: g_object_new_valist (gobject.c:1816)
==24706== by 0x704F894: g_object_new (gobject.c:1531)
==24706== by 0x6F0F2F0: g_inet_address_new_from_bytes (ginetaddress.c:459)
==24706== by 0x6F5D703: remove_network (gnetworkmonitornetlink.c:256)
==24706== by 0x6F5DD80: read_netlink_messages (gnetworkmonitornetlink.c:386)
==24706== by 0x6F2D5CA: socket_source_dispatch (gsocket.c:2505)
==24706== by 0x70E1D45: g_main_dispatch (gmain.c:2513)
==24706== by 0x70E2A06: g_main_context_dispatch (gmain.c:3050)
==24706== by 0x70E2BE9: g_main_context_iterate (gmain.c:3121)
==24706== by 0x70E2CAD: g_main_context_iteration (gmain.c:3182)
==24706== by 0x6F60A05: g_application_run (gapplication.c:1599)
==24706== by 0x42D011: main (ephy-main.c:472)
https://bugzilla.gnome.org/show_bug.cgi?id=667098
Some of the GLib tests deliberately provoke warnings (or even fatal
errors) in a forked child. Normally, this is fine, but under valgrind
it's somewhat undesirable. We do want to follow fork(), so we can check
for leaks in child processes that exit gracefully; but we don't want to
be told about "leaks" in processes that are crashing, because there'd
be no point in cleaning those up anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=666116
This can be used for debugging, or for progress UIs ("Connecting to
example.com..."), or to do low-level tweaking on the connection at
various points in the process.
https://bugzilla.gnome.org/show_bug.cgi?id=665805
Previously it was more or less assumed that GSocketConnections were
always connected, although this was not enforced. Make it explicit
that they don't need to be, and add methods to connect them, and
simplify GSocketClient by using those methods.
https://bugzilla.gnome.org/show_bug.cgi?id=665805
41e5ba86a7 introduced some changes to the
property flags of GAction. These changes were not a reflection of the
actual interface of GAction but were necessary due to GObject being
overly-sensitive to flag changes on property overrides.
Now that the GObject bug is fixed, we can restore the GAction flags to
their correct values.
https://bugzilla.gnome.org/show_bug.cgi?id=666615
It happens that one wants to customize settings for plugins or
shell extensions, that installing schemas in nonstandard locations.
This patch adds the --schemadir option to gsettings, and ensure
that the appropriate schema is found.
https://bugzilla.gnome.org/show_bug.cgi?id=666415
This interfaceifies the extra functions that were on GDBusActionGroup
for dealing with platform data.
The two main benefits of doing this:
- no longer have to do a silly song and dance in GApplication to avoid
calling GDBusActionGroup API from non-dbus-aware code
- the interface can be reused by the action group exporter to avoid
ugly and unbindable hook callbacks
https://bugzilla.gnome.org/show_bug.cgi?id=665737
Now that we're a GActionMap the story about propagating signals from our
(now-constant) internal action group is vastly simplified. If someone
calls g_application_set_action_group() then signals will stop working --
but this function is deprecated and they never worked before, so no big
loss there.
https://bugzilla.gnome.org/show_bug.cgi?id=643736
We provide a mechanism by which a 'platform' (eg: Gtk) can register some
hook functions to be called to collect platform-data at the point of
sending an outgoing action activation request and also to inform the
platform of this data on incoming requests (before and after dispatching
the actual request).
This can be used for forwarding timestamp and startup-notification
information (as is presently done in GApplication) but the before/after
hook could also be used for acquiring/releasing the Gdk lock or other
similar things.
https://bugzilla.gnome.org/show_bug.cgi?id=665737
Various places in the code were assuming that the hash table was always
available. Fix this, and also avoid leaking strings now that the hash
table may be NULL.
Based on a patch by Simon McVittie, bug 666167
g_main_loop_quit() only quits mainloops that are currently running --
not ones that may run in the future. The way the gdbus-threading tests
are written can possibly result in a call to g_main_loop_quit() before
g_main_loop_run() has started.
The mainloops aren't actually used for anything other than signalling
the completion of the threads, so just use g_thread_join() for that.
https://bugzilla.gnome.org/show_bug.cgi?id=666129
When trying to compile glib master on a RHEL 6.2 system, it fails with:
make[4]: Entering directory `/home/teuf/gnome/src/glib/gio'
CC libgio_2_0_la-gnetworkmonitornetlink.lo
In file included from gnetworkmonitornetlink.c:25:
/usr/include/linux/netlink.h:35: error: expected specifier-qualifier-list before 'sa_family_t'
gnetworkmonitornetlink.c: In function 'g_network_monitor_netlink_initable_init':
gnetworkmonitornetlink.c:99: error: 'struct sockaddr_nl' has no member named 'nl_family'
gnetworkmonitornetlink.c💯 error: 'struct sockaddr_nl' has no member named 'nl_pid'
gnetworkmonitornetlink.c💯 error: 'struct sockaddr_nl' has no member named 'nl_pad'
gnetworkmonitornetlink.c:101: error: 'struct sockaddr_nl' has no member named 'nl_groups'
make[4]: *** [libgio_2_0_la-gnetworkmonitornetlink.lo] Error 1
sa_family_t is defined in sys/socket.h, this commit makes sure this header is included before netlink.h
This fixes bgo bug #666001
GDBusConnection recently changed to dispatching its GDestroyNotify calls
from an idle instead of on-the-spot. Under the previous regime, we
would destroy-notify the action group export of a GtkApplicationWindow
at the point it was removed from the application (ie: slightly before
being disposed).
With the destroy notify now deferred to an idle, the window has already
been disposed, so the signal handlers have already been disconnected.
Avoid the problem by dropping our use of signal IDs and just do
g_signal_handlers_disconnect_by_func(), which doesn't complain if there
is no connection.
This was causing the following critical when running bloatpad twice:
GLib-CRITICAL **: g_hash_table_insert_internal: assertion `hash_table != NULL' failed
Clean up the docs for GApplication and related classes.
I'm no longer writing documentation for the structure type of classes
and interfaces. See https://bugzilla.gnome.org/show_bug.cgi?id=665926
for discussin on the correct way forward on this point.
Also: stop putting gtk-doc comments in installed headers.
Have one simple _get() API that returns the group immediately, in an
empty state. The group is initialised on the first attempt to interact
with it.
Leave a secret 'back door' for GApplication to do a blocking
initialisation.
GDBusConnection now dispatches GDestroyNotify calls back to the
mainloop. Adding an idle to the mainloop is O(n) in the number of idles
already there. We therefore need to periodically empty the mainloop to
avoid quadratic behaviour with a very large 'n'.
Exporting can only be done relative to a particular given main context
and all interaction with the action group must be on that same context.
Fix up the implementation so that the user can specify that context with
the normal (thread default) mechanism and document the limitation on the
API.
Adjust the testcase to adhere to the documentation limitations. It
passes now.
