There's a couple of places in GDBus where it's a programming error
(e.g. we'll assert or spew via e.g. g_warning()) to use the API on a
closed connection. This approach can never work since a
GDBusConnection can be closed at any point in time outside of
programmer control.
Just change the code to return a run-time error (e.g. return
G_IO_ERROR_CLOSED when sending messages, invoking methods) or silently
accept the request (e.g. exporting objects, registering for signals)
without doing anything.
Note that a GDBusConnection object is always useless after being
closed - e.g. there's no way to "reopen" a connection - the user will
have to create a new object and use that instead.
https://bugzilla.gnome.org/show_bug.cgi?id=623143
Signed-off-by: David Zeuthen <davidz@redhat.com>
Neutralise and deprecate the --uninstall option in the schema compiler
and remove it from gsettings.m4.
Make the new default behaviour a compromise between the old default
behaviour and the previous --uninstall option:
- never return a failure code if no schema files are found
- issue a warning instead
- remove the gschemas.compiled file if it exists
We only ever do the enum mapping for the property binding in the case
that a GParamSpecEnum exists and in that case the class is already
referenced by the GParamSpec. Use peek instead of ref/unref and add a
clarifying note.
Fix a bug where the type from g_variant_get_type() was used after
freeing the variant. This works for base types (since they are cached
and live forever) but not for arrays (where the bug was first seen).
Hold the GSettingsKeyInfo as part of the binding structure to save work
on each get/set. Use our copy of this structure to call the internal
get/set APIs. Give more descriptive error messages in the case of
invalid data on sets and retry using the translated default then schema
default value in case of failure to map on reads.
If we know the expected interface (e.g. :g-interface-info is set),
then we always warned when calling a method on a different
interface. Don't do that, there's no way the expected interface can
know anything about this method.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Either child_watch_source or timeout_source will already have been
destroyed after we finish the loop, and it's not safe to call
g_source_destroy() on it a second time unless we're still holding a
ref on it.
When disposing a GSocketConnection, don't explicitly close the
underlying GSocket. The GSocket will close itself if it gets
destroyed, and if it doesn't get destroyed, that presumably means the
app still wants to use it. Eg, this lets you use GSocketClient to
create a GSocketConnection, and then take the GSocket and destroy the
GSocketConnection.
https://bugzilla.gnome.org/show_bug.cgi?id=616855
The GSocket docs point out that g_socket_send/g_socket_receive may
return G_IO_ERROR_WOULD_BLOCK even if g_socket_condition_check claimed
that they wouldn't. Fix the socket streams to check for that.
https://bugzilla.gnome.org/show_bug.cgi?id=603309
Add lots of padding for public class structures. Notably, we seemed to
lack any padding whatsoever in the GDBusMessageClass struct (spotted
by Dan Winship). Also switch to using
gpointer padding[N];
instead of
void (*_g_reserved1) (void);
...
void (*_g_reservedN) (void);
Signed-off-by: David Zeuthen <davidz@redhat.com>
This patch breaks some rarely-used public API (only known user is
dconf).
This patch is based on work from Peng Huang <shawn.p.huang@gmail.com>.
See https://bugzilla.gnome.org/show_bug.cgi?id=621945
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is a minimal patch-out of the galias functionality. We will do a
release like this so that we can easily back it out if there are
reported problems.
A more substantial cleanup (mostly removing #includes from every file)
will follow if there are no issues.
Having this tool in GLib is a bad idea for a number of reasons:
- experience has shown that the simple file format was a bad idea
- the tool is currently implemented with a hack that would require a
dependency inversion to solve (the tool needs to depend on Python
GVariant bindings)
- the tool itself is unmaintained
It will be moved to the GConf git repository so people can continue to
use it for the purpose of converting GConf schemas.
When no path is provided for the schema, we have call
g_settings_new() instead of g_settings_new_with_path()
passing a NULL path.
This was crashing the tool on start since an assertion was
recently added to g_settings_new_with_path() to refuse NULL.
We can't search for a larger needle inside of a smaller haystack, and
unsigned integer subtraction tends to result in very large numbers
rather than small ones.
Add a check for this case and abort out immediately.
Also add a test case (lifted directly from the docs) that demonstrates
the problem.
Issue discovered and tracked down by Milan Bouchet-Valat
See https://bugzilla.gnome.org/show_bug.cgi?id=621838 for the whole
story. The problem was that we ended up reading data from arrays of
arrays when we were just supposed to be aligning the buffers.
Also add a host of debug infrastructure that was needed to find the
root cause. For now it can be turned on only via defining
DEBUG_SERIALIZER. In the future we might want to make it work via
G_DBUS_DEBUG. In a nutshell, the added debug info looks like this
Parsing blob (blob_len = 0x0084 bytes)
0000: 6c 01 00 01 3c 00 00 00 41 00 00 00 37 00 00 00 l...<...A...7...
0010: 08 01 67 00 08 61 61 79 61 7b 73 76 7d 00 00 00 ..g..aaya{sv}...
0020: 01 01 6f 00 08 00 00 00 2f 66 6f 6f 2f 62 61 72 ..o...../foo/bar
0030: 00 00 00 00 00 00 00 00 03 01 73 00 06 00 00 00 ..........s.....
0040: 4d 65 6d 62 65 72 00 00 00 00 00 00 34 00 00 00 Member......4...
0050: 03 00 00 00 63 77 64 00 01 73 00 00 23 00 00 00 ....cwd..s..#...
0060: 2f 68 6f 6d 65 2f 64 61 76 69 64 7a 2f 48 61 63 /home/davidz/Hac
0070: 6b 69 6e 67 2f 67 6c 69 62 2f 67 69 6f 2f 74 65 king/glib/gio/te
0080: 73 74 73 00 sts.
Parsing headers (blob_len = 0x0084 bytes)
Reading type a{yv} from offset 0x000c: array spans 0x0037 bytes
Reading type {yv} from offset 0x0010
Reading type y from offset 0x0010: 0x08 '
Reading type v from offset 0x0011
Reading type g from offset 0x0014: 'aaya{sv}'
Reading type {yv} from offset 0x001e
Reading type y from offset 0x0020: 0x01 ''
Reading type v from offset 0x0021
Reading type o from offset 0x0024: '/foo/bar'
Reading type {yv} from offset 0x0031
Reading type y from offset 0x0038: 0x03 ''
Reading type v from offset 0x0039
Reading type s from offset 0x003c: 'Member'
Parsing body (blob_len = 0x0084 bytes)
Reading type (aaya{sv}) from offset 0x0047
Reading type aay from offset 0x0048: array spans 0x0000 bytes
Reading type a{sv} from offset 0x004c: array spans 0x0034 bytes
Reading type {sv} from offset 0x0050
Reading type s from offset 0x0050: 'cwd'
Reading type v from offset 0x0058
Reading type s from offset 0x005b: '/home/davidz/Hacking/glib/gio/tests'
OK
Signed-off-by: David Zeuthen <davidz@redhat.com>
While we are already propagating the error to the user via the
GDBusConnection::disconnected signal (because the only safe thing is
to disconnect the other peer), changes are the user is simply not
listening to this signal.
This should never ever happen unless there's a bug in the
serializaer/deserializer so it's fine to complain via g_warning()
here.
Bug 621838, see
https://bugzilla.gnome.org/show_bug.cgi?id=621838
is related to this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
The GType for a GVariant is now a fundamental GType instead of a boxed
one so use the right marshaller.
Signed-off-by: David Zeuthen <davidz@redhat.com>
When asynchronously acquiring the DBus connection, assume a reference to
the proxy object, to avoid destroying it in the middle of the operation.
See https://bugzilla.gnome.org/show_bug.cgi?id=621905
Like how we're handling activation, use GVariant for timestamps. To
avoid polluting the GtkApplication API with GVariants, we rename the
GApplication signals to "quit-with-data" and "action-with-data".
GtkApplication will then wrap those as just "quit" and "action".
https://bugzilla.gnome.org/show_bug.cgi?id=621002
Allow constructing a GDBusProxy for well-known names as discussed here
http://mail.gnome.org/archives/gtk-devel-list/2009-October/msg00075.html
including test cases.
Make it possible to create a GDBusProxy for a GBusType instead of a
GDBusConnection. This requires G_BUS_TYPE_NONE so add that too.
Nuke g_bus_watch_proxy() since one can now more or less use GDBusProxy
for this.
Port gdbus-example-watch-proxy to this new API and include this
example in the GDBusProxy doc page.
Also nuke the GType parameter from the GDBusProxy constructors as
requested here: https://bugzilla.gnome.org/show_bug.cgi?id=621229
Also update the porting guide and other API docs for this change.
Also fix a bug in the signal dispatching code so each subscriber only
get notified once, not N times, for the same signal. Also add a test
case for this.
https://bugzilla.gnome.org/show_bug.cgi?id=621213
Signed-off-by: David Zeuthen <davidz@redhat.com>
The name buffer_availabile was kinda confusing, so its been renamed
to buffer_data_size() to match buffer_data().
Also I added a comment to buffer_ensure_space because its behaviour
wasn't obvious.
When the converter fills the whole buffer without reading all input,
we need to enlarge the buffer. Otherwise we get an assertion failure
for `outbuf_size > 0' in g_converter_convert.
https://bugzilla.gnome.org/show_bug.cgi?id=619945
gvdb just dropped the ability to have a separate "options" field. We
now store the options into a GVariant along with the default value.
For now, we use a small shim in GSettingsSchema in order not to touch
too much code. A more complete rewrite will follow.
This represents a change to the schema file format with another likely
to follow. glib-compile-schemas needs to be re-run after installing
this change.
accept more than one callback.
g_bus_own_name_with_closures
g_bus_own_name_on_connection_with_closures
g_bus_watch_name_with_closures
g_bus_watch_name_on_connection_with_closures
g_bus_watch_proxy_with_closures
g_bus_watch_proxy_on_connection_with_closures
https://bugzilla.gnome.org/show_bug.cgi?id=621092
Create a function run_with_application that both ensures the
app is running exactly while the test is running, which most
of the tests use. We start it beforehand, and kill it after.
This avoids having any interdependence between the tests (and
there definitely was before, because we didn't wait for
the process to actually terminate after a kill() call).
Also, open a pipe between the two, and have the child app
monitor that pipe. If it gets closed (e.g. because the parent
died), the child exits. This is the most reliable way to
avoid stale children; before, if we failed an assertion, the
parent would abort, and not run kill().
https://bugzilla.gnome.org/show_bug.cgi?id=621034
There was a slight race where we ended up calling into user code if
the user managed to unregister an object (or subtree) in the window
between
- processing the remote call on the worker thread; and
- continuing handling it on the user code thread (via an idle handler)
This patch fixes the problem.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Fix proxy construction for objects with no properties in the case
where G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES isn't set.
The unfortunate side-effect here is that GDBusProxy can no longer be
used to test for "object existence", e.g. creating a GDBusProxy for
any path and interface will not fail. But that's not really a big
deal, if apps rely on that they are doing something very wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=621119
Signed-off-by: David Zeuthen <davidz@redhat.com>
This adds a GApplication object to GIO, which is the core of
an application support class, supporting
- uniqueness
- exporting actions (simple scripting)
- standard actions (quit, activate)
The implementation for Linux uses D-Bus, takes a name on the
session bus, and exports a org.gtk.Application interface.
Implementations for Win32 and OS X are still missing.
The GSettings schema compiler was accepting any string as a path. It is
probably quite a common mistake to suspect that '/apps/foo' is a valid
path name when this will cause all sorts of trouble later. Check for
this case and report the error.
Since #include <gsettingsbackend.h> is a perfectly valid thing for
applications to do, and since we want to include gio headers from
gsettingsbackend.h, we need to effectively disable the #error we would
get from those headers (because we're not coming via gio.h).
We don't want to #include <gio/gio.h> here because this would cause
needless rebuilding of GSettingsBackend, GSettings,
GDelayedSettingsBackend, etc... every time someone changed anything in
any public header.
add GSimplePermission, a trivial const implementation of GPermission
can-request and can-release are always false for this implementation and
the value of 'allowed' is decided at construction.
Add GObject introspection annotations so that the length parameter is
correctly detected for g_variant_new_strv(), g_variant_get_strv() and
g_variant_dup_strv(). Also specify that it can be a NULL pointer in
g_variant_get_strv() and g_variant_dup_strv().
For g_settings_set_strv(), detect that a NULL value is allowed, meaning
empty array.
Closes bug #620384.
Signed-off-by: Ryan Lortie <desrt@desrt.ca>
Length of the array is redundant since it's NULL-terminated. This is not
consistent with many GLib and GTK+ functions, and adds complexity with
no real gain, while these convenience functions should be kept simple.
Closes bug #620312
This allows the caller to specify the reply type that they are expecting
for this call. If the reply comes back with the wrong type, GDBus will
generate an appropriate error internally.
- add a GVariantType * argument to g_dbus_connection_call() and
_call_sync().
- move the internal API for computing message types from introspection
data to be based on GVariantType instead of strings. Update users
of this code.
- have GDBusProxy pass this calculated GVariantType into
g_dbus_connection_call(). Remove the checks done in GDBusProxy.
- Update other users of the code (test cases, gdbus-tool, GSettings
tool, etc). In some cases, remove redundant checks; in some other
cases, we are fixing bugs because no checking was done where it
should have been.
Closes bug #619391.
Ryan pointed out on IRC that we didn't do anything here. Looking at
the code, it's painfully obvious that we should be returning an error
here since a comment already says that we've exhausted all possible
options.
Signed-off-by: David Zeuthen <davidz@redhat.com>
- Fix various #include issues
- Change #error to #warning for the EXTERNAL authentication mechanism.
It is not clear if this should work on Win32 at all.
- Call close() before unlink() for the SHA1 keyring
- Change #error to #warning so we don't forget to do
permission checking of the .dbus-keyrings directory
- Use Win32 SID for the SHA1 auth mech
- Apparently we can't use word 'interface' as an identifier
- Implement a _g_dbus_win32_get_user_sid() function. For now it's
private. Don't know if it should be public somewhere. Maybe in
a future GCredentials support for Win32? I don't know.
- GFileDescriptorBased is not available on Win32. So avoid using
it in GLocalFile stuff. Now, Win32 still uses GLocalFile + friends
(which works with file descriptors) so expose a private function
to get the fd for an OutputStream so things still work.
- Fixup gio.symbols
- Fixup tests/gdbus-peer.c so it builds
With this, at least things compile and the gdbus-peer.exe test case
passes. Which is a great start. I've tested this by cross-compiling on
a x86_64 Fedora 13 host using mingw32 and running the code on a 32-bit
Windows 7 box.
https://bugzilla.gnome.org/show_bug.cgi?id=619142
Signed-off-by: David Zeuthen <davidz@redhat.com>
If --uninstall is given then don't give an error if the schema directory
is empty. Instead, erase the gschemas.compiled file, if it exists.
This is the right thing to do in the 'make uninstall' rule, where the
schema directory could very well be left empty as a result.
Modify gsettings.m4 to use this option.
The test was assuming that g_timeout_add() waited for at least the amount of
time given to it before running the function. This is not the case -- the
function can be run as much as 1ms early. Make the lower time bound asserted
in the test more permissive to account for this.
- hold a lock while accessing the tree of delayed values
- use weak reference counts with the owner object to avoid doing
g_object_notify on a dead object
- dispatch the "has-unapplied" notify to the proper main context
This commit fixes up a few race conditions in the GSettingsBackend, mostly with
respect to change notifications occuring at the same time as the last reference
count on a GSettings is dropped. With GDBus feeding us our incoming signals in
a separate thread, this is something that could easily happen.
There is currently no way (near as I can tell) to ensure that a message
has been sent when using GDBus. If we exit() before we are sure, then
it is very possible that the message isn't sent at all. This behaviour
was observed when using the GSettings commandline tool with dconf.
A quick and dirty workaround for now.
Don't define __USE_GNU, thats a glibc-internal macro, and
don't use SOL_SOCKET when not including sys/socket.h.
Maybe this file should be called glinuxcredentialsmessage.c...
Bug #618730
Rename the --schema-files option to --schema-file, since it only
accepts one file at a time. Change the GSETTINGS_CHECK_RULE to
use it that way, too. And also make it work better with !srcdir
builds.
Bugs #616731 and #616864
Without this fix, we segfault if the exported object returned an error
on all get_property() calls (in reality, this never happens).
Signed-off-by: David Zeuthen <davidz@redhat.com>
Fix an unintentional double free introduced in commit
4ad4c306c3.
This bug manifested itself when trying to complete this
$ gdbus introspect --system --dest <tab>
From valgrind running gdbus-peer test:
==20513== 32 bytes in 1 blocks are definitely lost in loss record 1 of 15
==20513== at 0x4024E4C: realloc (vg_replace_malloc.c:429)
==20513== by 0x4079BB1: g_realloc (gmem.c:174)
==20513== by 0x4099472: g_string_maybe_expand (gstring.c:396)
==20513== by 0x409A42A: g_string_insert_c (gstring.c:1050)
==20513== by 0x42169AC: g_string_append_c_inline (gstring.h:153)
==20513== by 0x421682C: _my_g_input_stream_read_line_safe (gdbusauth.c:336)
==20513== by 0x421843E: _g_dbus_auth_run_server (gdbusauth.c:1265)
==20513== by 0x4222B94: initable_init (gdbusconnection.c:1783)
==20513== by 0x41CF8D5: g_initable_init (ginitable.c:106)
==20513== by 0x41CFA8D: g_initable_new_valist (ginitable.c:219)
==20513== by 0x41CF920: g_initable_new (ginitable.c:139)
==20513== by 0x4223479: g_dbus_connection_new_sync (gdbusconnection.c:2046)
Bug #618650.
==6279== 21,615 (4,708 direct, 16,907 indirect) bytes in 169 blocks are
definitely lost in loss record 12 of 13
==6279== at 0x4024D2E: malloc (vg_replace_malloc.c:207)
==6279== by 0x4079A90: g_malloc (gmem.c:135)
==6279== by 0x4079DC8: g_malloc_n (gmem.c:252)
==6279== by 0x4097E66: g_strsplit (gstrfuncs.c:2434)
==6279== by 0x42169A2: g_dbus_address_get_stream_sync
(gdbusaddress.c:875)
Bug #618622.
Free the bus address after creating the singleton.
==26308== 39,736 (10,517 direct, 29,219 indirect) bytes in 388 blocks
are definitely lost in loss record 14 of 15
==26308== at 0x4024D2E: malloc (vg_replace_malloc.c:207)
==26308== by 0x4079A90: g_malloc (gmem.c:135)
==26308== by 0x4079DC8: g_malloc_n (gmem.c:252)
==26308== by 0x4095607: g_strdup (gstrfuncs.c:102)
==26308== by 0x4216B9A: g_dbus_address_get_for_bus_sync
(gdbusaddress.c:961)
==26308== by 0x422A7AE: get_uninitialized_connection
(gdbusconnection.c:5241)
Bug #618622.
There's no need to re-build the a{sv} array, just get it right out of
the parameters. Also avoid some string copies.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is to match g_dbus_connection_new(). This extension allows us to
extend GDBusAuthObserver to also be used in client-side authentication
in the future (right now it's only used on the server-side).
This is needed to e.g. allow encoding maybe types (once we add
G_DBUS_CAPABILITY_FLAGS_MAYBE_TYPES) if, and only if, that capability
has been negotiated with the peer (via authentication).
This uncovered a bug in name watching if the name wasn't activatable.
Also provoked the need for on_connection variants of g_bus_watch_name
(added g_bus_watch_proxy's variant as well).
Also make the gdbus-example-server include some example
annotations. The output looks like this:
$ gdbus introspect --session --dest org.gtk.GDBus.TestServer --object-path /org/gtk/GDBus/TestObject
node /org/gtk/GDBus/TestObject {
interface org.freedesktop.DBus.Properties {
methods:
Get(in s interface_name,
in s property_name,
out v value);
GetAll(in s interface_name,
out a{sv} properties);
Set(in s interface_name,
in s property_name,
in v value);
signals:
PropertiesChanged(s interface_name,
a{sv} changed_properties);
};
interface org.freedesktop.DBus.Introspectable {
methods:
Introspect(out s xml_data);
};
interface org.freedesktop.DBus.Peer {
methods:
Ping();
GetMachineId(out s machine_uuid);
};
@org.gtk.GDBus.Annotation("OnInterface")
@org.gtk.GDBus.Annotation("AlsoOnInterface")
interface org.gtk.GDBus.TestInterface {
methods:
@org.gtk.GDBus.Annotation("OnMethod")
HelloWorld(in s greeting,
out s response);
EmitSignal(@org.gtk.GDBus.Annotation.("OnArg")
in d speed_in_mph);
GimmeStdout();
signals:
@org.gtk.GDBus.Annotation("Onsignal")
VelocityChanged(d speed_in_mph,
@org.gtk.GDBus.Annotation.("OnArg_NonFirst")
s speed_as_string);
properties:
@org.gtk.GDBus.Annotation("OnProperty")
@org.gtk.GDBus.Annotation("OnAnnotation_YesThisIsCrazy")
readonly s FluxCapicitorName = 'DeLorean';
readwrite s Title = 'Back To C!';
readonly s ReadingAlwaysThrowsError;
readwrite s WritingAlwaysThrowsError = "There's no home like home";
writeonly s OnlyWritable;
readonly s Foo = 'Tick';
readonly s Bar = 'Tock';
};
};
This makes it possible to use the cached properties mechanism even if
constructing the proxy with the DO_NOT_LOAD_PROPERTIES flag.
This is useful for cases where you obtain the and track object
properties out-of-band. For example, in udisks, the plan is to have
something like this
Manager.GetObjects (out ao paths, out aa{sa{sv}} all_properties);
Manager.ObjectAdded (o path, a{sa{sv}} all_properties);
Manager.ObjectChanged (o path, a{sa{sv}} all_properties);
Manager.ObjectRemoved (o path, a{sa{sv}} all_properties);
E.g. the first GetObjects() call will return *all* data about *all*
exported objects. Further, this way a client will only need to listen
these three signals (three AddMatch) on the Manager object and it will
never need to do GetAll() etc (e.g. can use DO_NOT_LOAD_PROPERTIES).
(Of course this only works if the client is interested in all
objects... while this is true for udisks it is generally not true for
other D-Bus services).
Also use expected_interface to check for programming errors.
These are included wholesale in the docs, and the copyright
headers make them even more overwhelming. Plus, we don't have
copyright headers on examples anywhere else.
This fixes a problem with services that doesn't implement GetAll() for
one reason or another.
$ gdbus introspect --session --dest org.freedesktop.ReserveDevice1.Audio0 --object-path /org/freedesktop/ReserveDevice1/Audio0
node /org/freedesktop/ReserveDevice1/Audio0 {
interface org.freedesktop.ReserveDevice1 {
methods:
RequestRelease(in i priority,
out b result);
properties:
readonly i Priority = 0;
readonly s ApplicationName = 'PulseAudio Sound Server';
readonly s ApplicationDeviceName = 'Internal Audio Analog Stereo';
};
interface org.freedesktop.DBus.Properties {
methods:
Get(in s interface,
in s property,
out v value);
};
interface org.freedesktop.DBus.Introspectable {
methods:
Introspect(out s data);
};
};
Lots of people been suggesting this. We still use MethodInvocation /
method_invocation for handling incoming method calls so use call()
instead of invoke_method() helps to separate the client and server
facilities. Which is a good thing(tm).
gunixcredentialsmessage.h ought to live with other UNIX headers,
and the credentials are moved from dbus-specific to just GIO sources.
Also move gfiledescriptorbased.c to the UNIX sources.
Things compile and the test-suite passes. Still need to hook up
gio.symbols and docs. There are still a bunch of TODOs left in the
sources that needs to be addressed.
Signed-off-by: David Zeuthen <davidz@redhat.com>
- used in some places as a move-along-as-we-go pointer
- used in other places as a pointer to the fixed base of an array
Switch all users to the first style to avoid a crasher.
socket_strerror() was assuming all "strerror" messages are shorter
than 128 bytes, which is certainly true on Linux, but apparently not
on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=615494
The messages array was not reallocated correctly because it was using
malloc instead of realloc. Also, if the user requested messages but
none were received we would segfault. Rewrite the code to fix this
and, for better readability, use GPtrArray instead of rolling our own.
Also make the docs mention that the user need to free the returned
GSocketControlMessage objects using g_object_unref().
Clarify that *messages may be set to %NULL if there are no messages
(this will save pointless allocs of arrays).
Finally, the Win32 version didn't set messages to the expected value.
https://bugzilla.gnome.org/show_bug.cgi?id=616877
Signed-off-by: David Zeuthen <davidz@redhat.com>
There are apparently two incompatible ways of naming abstract sockets:
pad the sockaddr with 0s and use the entire thing as the name, or else
don't, and just pass a shorter length value to the relevant functions.
We previously only supported the former method. Add support for the
latter.
Also correctly handle "anonymous" unix sockaddrs (eg, the client side
of a connection, or a socketpair() socket), and add unix domain socket
support to the socket-client and socket-server test programs to make
sure this all works.
https://bugzilla.gnome.org/show_bug.cgi?id=615960
Visual Studio doesn't like slash as directory separator, so use
backslash. While at it, sort the list of files put in the project file
just for clarity.
Gschema-compile uses glob which is available on Unix only. Thus can't
run the gschema-compile test except on Unix either.
To avoid an Automake error, comment out the SOURCES and LDADD of
unix-streams which for some reason has been commented out from
TEST_PROGS.
Can't use a Makefile.am target called foo_PROGRAMS for random files
that aren't actually programs, as Automake assumes EXEEXT should be
appended to the file names.
Correspond to GUnixInputStream and GUnixOutputStream. No true async
support though. But that is how the Win32 API is, for files not
explicitly opened for so-called overlapped IO.
The API to create these streams takes Win32 HANDLEs. Not file
descriptors, because file descriptors are specific to the C library
used. The user code and GLib might be using different C libraries.
Also add a test program for the new classes, and a gio-windows-2.0.pc
file.
- if a key becomes mandatory, drop it from the changeset
- if we still get failing writes (ie: because of a race) then drop the
entire changeset and signal that it happened
Define GStatBuf as the type used by g_stat() and g_lstat(). Replaces
the non-public struct tag _g_stat_struct. Mostly relevant for Windows
where there are several variants of stat-style structs. On POSIX, is
just another name for struct stat.
Actually, also on many POSIX systems there are in fact several
variants of struct stat and corresponding stat() and lstat()
functions, but as g_stat and g_lstat are normally on POSIX just macros
that expand to stat and lstat, this should not cause a problem. It's
only when it's the actual g_stat() or g_lstat() implementation inside
GLib that gets called that one needs to be sure the passed struct is
the same as what GLib expects.)
We need to check priv->cancelled after taking the lock. Previously we
only checked it just before taking the lock, which left a small chance
for a race.
Don't keep the lists of source files for libglib, libgobject and
libgio in the VS project files in addition to the canonical location,
the corresponding Makefile.am files.
Instead, generate the corresponding .vcproj files at make dist time
using the C preprocessor, from template files called .vcprojin. We
still list explicitly in the .vcprojin files some of the
Windows-specific source files, and the sources files of gnulib and
pcre.
There might be a GSource attached to a GMainContext, about to be removed by a
pending cancellation. Deleting the handle too early will trigger a g_warning in
the "select()" call in GMainContext. Attached patch fixes this by deferring
destruction of WSAEVENT object until GSocket's finalize().
Patch from bug #612702.
Signed-off-by: Tor Lillqvist <tml@iki.fi>
It turns out that the way this worked did not work out for the current
main usecase (gedit) due to issues with how this is best integrated
with GtkTextView. So, in order to not have to support an unused non-ideal
API forever we remove this before its been in a stable release.
The basic feature seems to have some utility though, so we hope for it
to eventually return in a better form.
Some buildd environments have an unwritable $HOME, which makes the
test that looks for an unexisting file there fail. Use $TMP instead,
which should be more reliable.
https://bugzilla.gnome.org/show_bug.cgi?id=610860
root can access and write to a directory when it doesn't have
exec and write permissions respectively. So expect the tests that
check that to succeed rather than to fail when running as root.
https://bugzilla.gnome.org/show_bug.cgi?id=552912
This adds support for G_FILE_MONITOR_SEND_MOVED events when requested by
the user to the inotify backend. Last part to fix bug #547890.
Based heavily on a patch by Martyn Russel <martyn@lanedo.com>.
Add a G_FILE_MONITOR_SEND_MOVED flag indicating the API user
wants to receive the new G_FILE_MOINOTR_EVENT_MOVED event
instead of single CREATED/DELETED events.
First part of bug #547890.
The (linux specific) system call splice can be
used to transfer data between file descriptors
whitout copying them into user space.
See bug #604086 for additional details.
Fixes: Bug 604967 - 2.22.3 libasyncns build fails on HP-UX 11.11
* gio/libasyncns/asyncns.c: properly guard the includes of sys/select.h
and sys/time.h
If threads are available we always enable threads in gobject, which
means all gio/gobject code can enable the unconditional thread calls.
This is a minor optimization since we avoid a bunch of unnecessary
is-threads-enabled checks.
https://bugzilla.gnome.org/show_bug.cgi?id=606775
Adds an optional query method to giomodules which should return all
possible extension points the module may implement.
Then we add a new call g_io_modules_scan_all_in_directory() similar to
g_io_modules_load_all_in_directory() that doesn't return all loaded
modules, thus allowing lazy loading.
In g_io_modules_scan_all_in_directory we look for an optional
giomodule.cache file and use the information in that to avoid
loading modules until they are needed for an extension point.
In the deserialise function, GUnixFDMessage was comparing 'level' to
both SOL_SOCKET and SCM_RIGHTS. It is correct to compare 'type' to
SCM_RIGHTS. The code passed tests only because:
1) it's a "should always be OK" double-check
2) SOL_SOCKET and SCM_RIGHTS, by chance, both have the value '1' on
Linux systems.
Not only is the default implementation broken (it causes infinite recursion
as seen in bug #603982), but its also worthless. If we just fall back on the
default stream operations we automatically get async version based on
the sync filter stream operations, which is what we want.
Note: Since we export types with Iface in the name rather than
Interface we have to use some typedefs to make this work. New
interfaces should probably use Interface as the public name.
The "default location" of the given mount is a path that reflects
the main entry point for the user (e.g. the home directory, or the
root of the volume).
https://bugzilla.gnome.org/show_bug.cgi?id=561998
• "asynchronous" was misspelled as "asyncronous" in various places;
• punctuation was missing;
• g_async_initable_new_async() had a stray "and";
• references to g_async_initable_new_finish() were missing a "the".
https://bugzilla.gnome.org/show_bug.cgi?id=602417
This is an interface for stateful conversions of data. Its a generic
interface suitable for things like IConv, compression, decompression,
and regexp replacement.
Introduced a more precise error message for EPERM when symlinking to
a local filesystem.
EPERM on symlink means symlinking is not supported by the underlying
fs so it is not the general meaning of EPERM which roughly translates
to 'Operation not permitted'.
Since returning exactly one match has special significance, don't
give up matching before we've found at least 2 types. Also, make
sure that we don't return the same mime type more than once.
Bug 541236.
GWin32DirectoryMonitor was quite broken, but nobody had apparently
noticed, or at least not filed any bug. Only now with a bleeding edge
GTK+ file chooser does the code get exercised in common programs like
gtk-demo or GIMP, apparently. Bug #598899.
The source can be destroyed by the time we complete the result, and
then the g_source_get_context(current_source) call will cause
a critical error. We check for the source being destroyed and avoid
the check in that case.
This means we miss the right-thread check in this case, but thats
merely a helper, so this is not critical.
Metadata are really part of the pathname, not the target file
(as they are stored by pathname, and for many metadata like icon position
etc make not sense using the target data). So, even if nofollow
is not specified we should not follow links for metadata.
Ideally this should be implemented in the metadata extension in gvfs,
but the extension API does not allow this, so we do it in gio.
See https://bugzilla.gnome.org/show_bug.cgi?id=593809
g_network_address_address_enumerator_next_finish takes the first item of the
address list and moves the pointer to the next one, so we shouldn't do the same
in g_network_address_address_enumerator_next_async function
Fixes bug #593941
g_socket_send_message() and g_socket_send_to() fail with ENOBUFS or
EFAULT due to the fact that if no "address" argument is specified to
g_socket_send_message, when g_socket_send_message() calls sendmsg(2),
the 2nd parameter to sendmsg ("const struct msghdr *msg") contains
uninitialized values. The fix is simple - initialize msg.msg_name to
NULL and msg.msg_msg_namelen to 0.
https://bugzilla.gnome.org/show_bug.cgi?id=594759
This warning hits code that uses GSimpleAsyncResult outside of a
mainloop as a helper object. For instance EggDBus does this.
Since the bugs this warning would fix are pretty easy to spot
and since EggDBus is deployed already we just remove the
"called from outside main loop" warning.
However, we need to keep the "called from wrong context" warning
as that is very helpful when debugging misuse of the new multiple
main context code.
Previous code used g_mkstemp(). But when using
G_FILE_CREATE_REPLACE_DESTINATION, no attempt was made to ensure proper
mode and flags of the created temporary file. The visible issue was that
the file was always created with mode 0600 as opposed to using 0666.
(The invisible issue was that O_RDWR was used instead of O_WRONLY.)
When doing a g_file_copy() with nofollow-symlinks (to copy a link for
example), the later copying of the file attributes copies the source
links 777 attributes to the target's attributes. As chmod affects the
symlink target, this would cause such copies to always set the target to
777 mode.
This patch makes setting the mode with nofollow-symlinks fail with
NOT_SUPPORTED.
The aforementioned g_file_copy() will still succeed, because it ignores
errors of the attribute copy.
Even though we ignore SIGPIPE, gdb will still stop when the process
receives one, which sometimes confuses people into thinking the app
has crashed (eg, bug 578984, bug 590420), and is annoying anyway. So
use MSG_NOSIGNAL if it's there.
http://bugzilla.gnome.org/show_bug.cgi?id=591378
This patch only adds the function. The function is a NOP.
See the API documentation for a rationale.
Part of: Bug 591388 - number of GCancellables available is too limited
For details, see bug 587482. The new api:
- Provide new _with_operation() variants of all unmount and eject methods
- Add GMountOperation::show-processes signal
- this can be used to show processes blocking an unmount operation
- Deprecate all unmount and eject methods
- Add g_drive_can_start_degraded() method
- this is to avoid auto-starting degraded drives
- Make g_drive_stop() resp. g_file_stop_mountable() take a GMountOperation
- these ops were recently added and not yet public API so it's fine
to change how they work
- Provide a way to poll mountable files, e.g. g_file_poll_mountable()
- Add some missing file attributes for mountable files
- G_FILE_ATTRIBUTE_MOUNTABLE_UNIX_DEVICE_FILE
- needed for the GDU Nautilus extensions to format a volume
- G_FILE_ATTRIBUTE_MOUNTABLE_CAN_START_DEGRADED:
- mimics g_drive_can_start_degraded()
- G_FILE_ATTRIBUTE_MOUNTABLE_CAN_POLL:
- mimics g_drive_can_poll_for_media()
- G_FILE_ATTRIBUTE_MOUNTABLE_IS_MEDIA_CHECK_AUTOMATIC
- mimics g_drive_is_media_check_automatic()
g_simple_async_result_complete() now checks that it's being run from
the correct main loop, so tests/gio/simple-async-result was failing,
because it called it from outside any main loop. (And gio's pltcheck
was failing because I hadn't added g_main_current_source() to it.)
GFile allows for the possibility that external implementations may not
support thread-default contexts yet, via
g_file_supports_thread_contexts(). GVolumeMonitor is not yet
thread-default-context aware.
Add a test program to verify that basic gio async ops work correctly
in non-default contexts.
http://bugzilla.gnome.org/show_bug.cgi?id=579984
Currently, to implement cancellability correctly, all synchronous
calls to GSocket must be preceded by a g_socket_condition_wait() call,
(even though GSocket does this internally as well) and all
asynchronous calls must do occasional manual
g_cancellable_is_cancelled() checks. Since it's trivial to do these
checks inside GSocket instead, and we don't particularly want to
encourage people to use the APIs non-cancellably, move the
cancellation support into GSocket and simplify the existing callers.
http://bugzilla.gnome.org/show_bug.cgi?id=586797
This patch and the previous ones fixes the performance issues noted in
Bug 587089 – lookup_attribute() takes too much CPU
It increases performance for querying attributes by ~15% in my tests.
g_filename_complete_get_completions() return value is meant to be a
g_strfreev-compatible array i.e. NULL-terminated. However, pointer arrays
aren't automagically NULL-terminated. This fixes bug 586868
I'm not sure why we used the elaborate formula to convert the io-priority
to the priority of the mainloop idle when emulating async i/o with idles.
However, it causes the default io priority to be less than the normal
idle prio, so the i/o won't be scheduled if there is an idle outstanding.
There is really no great mapping to use here, doing blocking i/o in an
idle of any prio is generally bad and apps doing a lot of async i/o should
initialize threads. However, if we use the io-priority directly we at least
avoid the starvation problem above and make things easier to understand.
Add API for starting/stopping drives. This new API will enable
GVolumeMonitor and GVfs implementations to add support for the
following features
1. Powering down external hard disk enclosures / drives
2. Starting/stopping multi-disk devices (such as RAID/btrfs/ZFS)
3. Connecting/disconnecting iSCSI devices
4. Reacting to the user pressing e.g. the "remove drive" button on
a IBM/Lenovo Ultrabay: http://www.thinkwiki.org/wiki/Ultrabay
See the bug for the corresponding GVfs and Nautilus changes.
The icon names are folder-documents, folder-download, folder-music,
folder-pictures, folder-publicshare, folder-templates, folder-videos.
See bug 541276.
Change the logic in g_socket_listener_add_inet_port() as per the
reasoning in the bug report.
- If the OS supports neither IPv6 or IPv4, fail.
- If the OS supports only IPv6, do that.
- If the OS supports only IPv4, do that.
- If the OS supports IPv6 and IPv6 "speaks" IPv4 then bind it
and be done.
- If the OS supports IPv6 and IPv6 doesn't "speak" IPv4 then
create an additional socket for IPv4.
- If binding any socket fails then fail the entire call.
Also, remove the ability to call this function with port == 0. This
is a useless thing to do anyway since you have no way to know what
port number was actually allocated. We should have a separate
function to deal with this.
... as g_cancellable_cancel()
Rework a g_critical() that would (rarely) trigger when _reset() was
called in a thread different from _cancel() by making _reset() wait for
the cancel function to be finished the same way
g_cancellable_disconnect() uses.
The default implementation of g_file_copy() checked the size of the file
to copy to give useful progress updates unconditionally. This can cause
long delays on 1-connection FTP servers while it tries to open a second
connection before it returns EBUSY. This patch makes this query only
happen when we actually send progress updates.
In particular, targets with weight 0 should be very UNlikely to be
selected, not very likely, as they were before. However, even ignoring
that bug in the logic, there was an additional bug (swapping list
items would cause the 0-weight items to get re-ordered incorrectly
anyway), and the code contained several fencepost errors.
This patch also adds gio/tests/srvtarget.c, which confirms that for a
sample list of targets, we now generate all possible correct random
sortings and no incorrect sortings, and the correct sortings occur in
roughly the expected proportions (though if the current code is
still wrong, those proportions may be wrong as well).
http://bugzilla.gnome.org/show_bug.cgi?id=583398
Do proper referencing and unreferencing of
GWinHttpFileInputStream::file and
GWinHttpFileInputStream::file::vfs. Implement
GWinHttpFileInputStream::close_fn.
The docs mentions a separate seekable API for the various file streams
which don't actually exists. Change this to refer to the generic
GSeekable calls.
It was possible for a signal handler to remove the last reference and
dispose the monitor. If there were remaining pending_file_changes they
tried to dereference the disposed monitor.
This patch simply calls g_object_{ref,unref} around the loop that signals
the changes.
It's a bit lame, but some of our C++ wrapping scripts expect objects to be
typedefed like:
typedef struct _FooClass FooClass;
struct {} _FooClass;
Rather than:
typedef struct {} FooClass;
Functionally they're the same, but the former makes our lives easier in the
short term
The whole protocol name thing is pretty weird. The getprotobyname functions
seem to only specify one mapping for name <-> ids, so all families/types
must use the same values. Plus the values used for the protocols are
standardized by IANA, so are always the same.
So, we drop using names for protocols, intead introducing an enum with
a few commonly availible and used protocols.
Mention g_socket_set_listen_backlog in g_socket_listen.
Explain that listen backlock needs to be set before calling
listen. Also verify this with a g_return_if_fail.
Previously we saved the location in various places which is unnecessary
and sometimes even wrong. For instance, we saved the address we bound to
which may not have the final port set.
The main error would be "not supported" which could happen for e.g.
unix domain sockets, we don't really care, as this is mainly something
for TCP to help out a bit.
This is nice for some callers so they can report an error.
It is also required to support opional address types like
abstract paths for unix domain sockets.
When you're using the threaded resolver and using a sync call
without a cancellable the resolve_sync forgot to unlock the
initial req->mutex lock, leading to a deadlock when unrefing
the request.
We want to use the protocol id for lookup in the GSocketConnection
code, so we expose it. We also make GSocket store the protocol
as an int for less memory use and to allow platform specific protocols
to be specified.
Also added g_socket_protocol_id_lookup_by_name() to allow the higher
level code to specify the name by string, and g_socket_get_protocol_name()
to get it.
We were sometimes failing in g_socket_check_pending_error because
we were not setting optlen on input and it was sometimes randomly
less than sizeof(int).
This adds:
GInitable - failable object constructor interface
GAsyncInitable - async failable object constructor interface
GSocket - Platform independent lowlevel berkely socket style object
GSocketControlMessage - For passing control messages over GSocket
GUnixFDMessage - unix fd passing socket control message
Some changes were done during the import from gnio to make things
work in glib. For instance, types were moved to other headers, header
file boiler plate were updated to glib style and gio.symbols stuff
was added.
This implements all the GIOStream file ops for local files.
We use the "fallback to output stream" for all GFileIOStream ops.
Some helpers stuff was added to the local input and output streams
so they could be reused.
There is no need to have a GIOChannel in the GPollFD in
g_cancellable_create_pollfd. All we need is an Event object that
we signal when cancelling and reset when resetting.
Also, supporting g_cancellable_get_fd on Windows using _pipe is useless
as it doesn't work with any corresponding poll() function, so just don't
support that on win32.
I tested this with the cancellation support in GSocket from gnio.
glib/pcre/pcre_ucp_search_funcs.c, glib/pcre/pcre_valid_utf8.c: add
back missing config.h includes, and this time add them to the copies
in glib/update-pcre/ too so they don't get lost again on the next PCRE
update.
glib/garray.c, glib/gbase64.c: fix signed/unsigned pointer casts
gio/xdgmime/xdgmimeglob.c: remove unused variable
gio/tests/live-g-file.c: fix printf args on x86_64
tests/Makefile.am, tests/regex-test.c: remove redundant -DENABLE_REGEX
It turns out that just calling g_inet_address_get_type() isn't
enough, since its marked G_GNUC_CONST, so the call is optimized
away. If we assign the return value to a volatile location we ensure
it is called.
OS X's headers split up the current and old (BIND 4) nameserver stuff
slightly differently than Linux does, but explicitly including
arpa/nameser_compat.h does the right thing on both. Part of #580301
In glibc, IN6_IS_ADDR_UNSPECIFIED() et al. cast their argument to a
uint32_t*, so it doesn't matter whether you pass them the in6_addr
itself (which is what you're supposed to do) or one of its union
members (which is what we were actually doing). Solaris's macro
accesses the in6_addr fields directly though, and so only works if you
pass the actual in6_addr. #580194.
Bug 579862 – requesting xattr::foo ends up calling getxattr(...,
user.:foo,...)
The patch makes sure we escape xattr::, not xattr:, before adding user.
and calling getxattr.
Higher-level wrappers around GResolver. GSocketConnectable provides an
interface for synchronously or asynchronously iterating multiple
socket addresses, with GNetworkAddress and GNetworkService providing
interfaces based on hostname and SRV record resolution.
Part of #548466.
GResolver provides asynchronous (and synchronous-but-cancellable) APIs
for resolving hostnames, reverse-resolving IP addresses back to
hostnames, and resolving SRV records. Part of #548466.
Types and methods for dealing with IPv4 and IPv6 addresses (and UNIX
domain socket addresses under UNIX). This does not include code for
actual socket I/O.
Originally from "gnio". Much of the code was written by Christian
Kellner, Samuel Cormier-Iijima, and Ryan Lortie.
Part of #548466.
There are race conditions when connecting and disconnecting from the
"cancelled" signal on GCancellable which you need to do when
implementing cancellable operations. This adds helper functions that
avoid these races and mentions these races in the docs. (#572844)
Apps don't generally create backup directories, etc. So, if the file
ends with ~ but is not a regular file shouldn't be considered a backup
file. (#573673)
When returning a filesystem type id, say "ext3/ext4" instead of "ext3",
since both use the same superblock magic, so we can't discriminate
them without more work.
Sometimes it seems like the trash dir and the file are on the same
filesystem but the rename fails with EXDEV anyway (can happen
e.g. with bind mounts or multiple mounts of the same device). In this
case we want to return the right error so that apps can fallback to
regular delete.
Update various README files to refer to git instead of svn.
Add a README.commits that is pretty much a copy of the same file
in GTK+. Also discontinue ChangeLog files.
2009-03-26 Carlos Garnacho <carlosg@gnome.org>
Bug 575270 – GVolumeMonitor::mount-pre-unmount not being emitted
* gunixmount.c (eject_unmount_cb) (eject_unmount_do_cb)
(eject_unmount_do): Emit ::mount-pre-unmount and wait 500msec before
actually trying to unmount.
svn path=/trunk/; revision=8020
2009-03-17 Colin Walters <walters@redhat.com>
Bug 575708 - runaway inotify madness ...
* gfilemonitor.c: Queue up events in a local list and
fire one idle, instead of queuing lots of individual
idles which has bad performance behavior.
svn path=/trunk/; revision=8010
2009-03-16 Alexander Larsson <alexl@redhat.com>
Bug 575555 – Use fsync() when replacing files to avoid data loss on crash
* configure.in:
Look for fsync().
* glib/gfileutils.c:
(write_to_temp_file):
fsync temp file if destination file exists
2009-03-16 Alexander Larsson <alexl@redhat.com>
Bug 575555 – Use fsync() when replacing files to avoid data loss on crash
* glocalfileoutputstream.c:
(g_local_file_output_stream_close):
(_g_local_file_output_stream_replace):
fsync temp file before closing if replacing target file
svn path=/trunk/; revision=7991
2009-03-04 Alexander Larsson <alexl@redhat.com>
Bug 573970 – crash in gunixvolumemonitor:update_mounts when unmounting
* gunionvolumemonitor.c:
(g_union_volume_monitor_dispose):
Run dispose on child monitors when disposing.
* gunixvolumemonitor.c:
Remove all volumes and mount on dispose to avoid circular
dependencies not freeing the monitor
svn path=/trunk/; revision=7957
2009-03-03 Alexander Larsson <alexl@redhat.com>
Bug 561172 – gnome-open fails on local URIs with anchors
* gdesktopappinfo.c:
Don't force uris to filenames if the uri has an anchor, because
that would strip the anchor.
* glocalvfs.c:
Strip anchor from file:// uris when creating GFile, since
g_filename_from_uri doesn't handle them.
svn path=/trunk/; revision=7953
2009-03-03 Alexander Larsson <alexl@redhat.com>
Bug 562613 – Missing const modifier in string parameters
* gfileinputstream.[ch]:
* gfileoutputstream.[ch]:
* glocalfileinfo.[ch]:
Make string arguments const if used as such.
svn path=/trunk/; revision=7952
2009-03-03 Alexander Larsson <alexl@redhat.com>
* glocalfile.c (g_local_file_query_filesystem_info):
Handle filesystems no supporting reporting how much is free.
This fixes bug 573454 where the filesystem not supporting this
is the gvfs smb backend over the fuse filesystem.
svn path=/trunk/; revision=7951
* giomodule.c: Use a separate lock for extension point registration
to avoid deadlock. Discovered by Torsten Schoenfeld
svn path=/trunk/; revision=7935
2009-02-27 Alexander Larsson <alexl@redhat.com>
* giomodule-priv.h:
* giomodule.c:
Split out the extension point registration code to its
own function.
* glocalvfs.c:
Ensure extension points are registered before extending it.
It might not have happened yet if g_vfs_get_local() is called.
svn path=/trunk/; revision=7919
2009-02-26 Alexander Larsson <alexl@redhat.com>
Bug 540461 – g_memory_output_stream_get_data_size() doesn't behave as document
* gmemoryoutputstream.c:
Track actual valid size, even if we later seek back.
* tests/memory-output-stream.c:
Add testcase
svn path=/trunk/; revision=7916
2009-02-26 Alexander Larsson <alexl@redhat.com>
* gdesktopappinfo.c:
Support desktop file key X-GIO-NoFuse which disables
use of fuse pathnames for %u and %U arguments.
svn path=/trunk/; revision=7914
2009-02-25 Alexander Larsson <alexl@redhat.com>
Bug 570073 – Add support for reading filesystems on Interix
* gunixmounts.c (_g_get_unix_mounts):
Support Interix. Patch from Fabian Groffen
svn path=/trunk/; revision=7911
2009-02-20 Alexander Larsson <alexl@redhat.com>
* gcontenttype.c:
(g_content_type_guess):
Don't ever sniff desktop files when the filename is known.
In other words, only allow desktop files with the .desktop extension
and when the filename isn't known.
This is a security precaution since desktop files can execute
arbitrary code when launched and we don't want to allow them to
try and hide as another type. There is no legit reason to not
have the .desktop extension anyway.
svn path=/trunk/; revision=7892
2009-02-19 Alexander Larsson <alexl@redhat.com>
Bug 549298 – impossible to copy files with p (pipe) flag
* gfile.c:
(file_copy_fallback):
Error out if the source file is a special file
svn path=/trunk/; revision=7885
2009-02-18 Alexander Larsson <alexl@redhat.com>
Bug 560564 – Replacing a symlink with its linked file truncates the original file
* gioenums.h:
Add G_FILE_CREATE_REPLACE_DESTINATION
* glocalfileoutputstream.c:
(handle_overwrite_open):
(_g_local_file_output_stream_replace):
Handle G_FILE_CREATE_REPLACE_DESTINATION when overwriting files.
* gfile.c:
(file_copy_fallback):
Pass G_FILE_CREATE_REPLACE_DESTINATION to g_file_replace when copying
with overwrite.
svn path=/trunk/; revision=7880
2009-02-17 Ryan Lortie <desrt@desrt.ca>
* gfileinfo.c: unref the destination's attribute matcher before
overwriting it.
svn path=/trunk/; revision=7879
* gmountoperation.[hc]: Add an "aborted" signal to abort a
mount operation from the backend side.
* gvolume.h: Add docs regarding the "aborted" signal.
svn path=/trunk/; revision=7866
2009-02-13 Ryan Lortie <desrt@desrt.ca>
Bug 505042 – add file attribute for actually used file size in bytes
* gfileinfo.h: add G_FILE_ATTRIBUTE_STANDARD_ALLOCATED_SIZE define to
"standard::allocated-size"
* gfileattribute.c: document
* glocalfileinfo.c: set the allocated size from st_blocks * 512
svn path=/trunk/; revision=7865
2009-02-16 Ryan Lortie <desrt@desrt.ca>
Bug 571598 – GAsyncResult with NULL gobject
* gsimpleasyncresult.c: remove various assertions and add some checks
to allow for a NULL source_object in GSimpleAsyncResult.
svn path=/trunk/; revision=7864
2009-02-06 Murray Cumming <murrayc@murrayc.com>
* gio/gfilterinputstream.c:
* gio/gfilteroutputstream.c: Correct the grammar in some property
documentation.
* gio/gdatainputstream.c:
* glib/gregex.c: Correct the spelling of
occurrence in documentation.
svn path=/trunk/; revision=7856
2009-02-04 Alexander Larsson <alexl@redhat.com>
Bug 566747 - URIs opened with firefox %u load as local files
* gdummyfile.c (g_dummy_file_get_path):
Dummy files are never used for local paths, so always return NULL
in get_path().
svn path=/trunk/; revision=7849
2009-01-29 Ryan Lortie <desrt@desrt.ca>
* gioerror.c (g_io_error_from_errno): handle all possible cases of
EAGAIN and EWOULDBLOCK being (un)defined and (un)equal.
svn path=/trunk/; revision=7836
2009-01-28 Ryan Lortie <desrt@desrt.ca>
Bug 568575 – _async functions for GDataInputStream
* gdatainputstream.h:
* gdatainputstream.c: add _async versions of read_line and read_until.
* gio.symbols:
* ../docs/reference/gio/gio-sections.txt: add new functions
* tests/sleepy-stream.c: new test case for async read line
* tests/Makefile.am: add new test
svn path=/trunk/; revision=7835
2009-01-22 Ryan Lortie <desrt@desrt.ca>
Bug 568723 – g_buffered_input_stream_fill_async doesn't take count == -1
* gbufferedinputstream.c (g_buffered_input_stream_fill_async,
g_buffered_input_stream_fill): check for count < -1 instead of count <
0 and copy modified check to non-async version for consistency.
document the "count = -1" API.
svn path=/trunk/; revision=7828
2009-01-22 Ryan Lortie <desrt@desrt.ca>
Bug 568741 – g_buffered_input_stream_fill_async doesn't work
* gbufferedinputstream.c (fill_async_callback): grow the buffer tail
after we have successfully read data from the base stream
svn path=/trunk/; revision=7827
2009-01-20 Ryan Lortie <desrt@desrt.ca>
Bug 568394 – dropping the last reference to a stream filter closes the
base stream
* gfilterinputstream.h:
* gfilterinputstream.c: add "close-base-stream" property and only
close the base stream if it is true. issue async close callbacks from
correct source object.
* gfilteroutputstream.h:
* gfilteroutputstream.c: add a "close-base-stream" property and only
close the base stream if it is true. issue async close callbacks from
correct source object.
* gbufferedoutputstream: check g_filter_output_stream_get_close_base()
before closing the base stream. fix invalid source tag comparison in
close_async (was comparing to flush_async).
* ../docs/reference/gio/gio-sections.txt:
* gio.symbols: add
g_filter_{in,out}put_stream_{g,s}et_close_base_stream
* tests/filter-streams.c: new test cases
* tests/Makefile.am: add new test
* tests/.gitignore: add new test
svn path=/trunk/; revision=7825
2009-01-05 Ryan Lortie <desrt@desrt.ca>
* tests/.gitignore: improve
* tests/Makefile.am: add new simple-async-result test
* tests/simple-async-result.c: new file to test GSimpleAsyncResult
svn path=/trunk/; revision=7767
2008-12-12 Ryan Lortie <desrt@desrt.ca>
* gio/gicon.c (g_icon_to_string_tokenized): free the tokens when done
with them
svn path=/trunk/; revision=7743
2008-12-12 Ryan Lortie <desrt@desrt.ca>
* gio/gunixmounts.c (g_unix_mount_at): fix leak that occurs when
multiple mount entries match the requested path
svn path=/trunk/; revision=7742
2008-12-10 Alexander Larsson <alexl@redhat.com>
Bug 562452 - Ensure we return G_IO_ERROR_CANCELLED if cancelling
g_simple_async_result_run_in_thread
* gsimpleasyncresult.c:
Make g_simple_async_result_run_in_thread check cancellation before
calling out to the user in the callback. This means we guarantee
reporting cancels of async operations from the main threads, which
is probably more in line with what users expect.
Note that there are still no such guarantees for cancelling sync
operations or cancelling async operation from outside the main
thread. Furthermore, the exact behaviour of async implementations
not using run_in_thread may differ.
svn path=/trunk/; revision=7740
2008-12-09 Alexander Larsson <alexl@redhat.com>
Bug 515777 - incorrect date&time on copy
* glocalfile.c:
(g_local_file_class_init):
Copy mtime by default
* gfile.c:
Change docs about G_FILE_COPY_ALL_METADATA to not mention
mtime as an example.
svn path=/trunk/; revision=7738
* gunixmounts.c: (guess_system_internal): Hide ecryptfs mounts,
so that the desktop does not show both the mount and the target
directory. Patch by Martin Pitt
svn path=/trunk/; revision=7736
* gio.symbols:
* gunixinputstream.[hc]:
* gunixoutputstream.[hc]: Add "fd" and "close-fd" properties
including getters and setters. Patch by Maciej Piechotka
svn path=/trunk/; revision=7735
