If sending a lot of data and/or the other peer is not reading it, then
socket buffers can overflow. This is communicated from the kernel by
returning EAGAIN. In GIO, it is modelled by g_output_stream_write()
and g_socket_send_message() returning G_IO_ERROR_WOULD_BLOCK.
It is also problematic that that we're using synchronous IO in the
shared GDBus IO thread. It means that one GDBusConnection can lock up
others.
It turns out that by porting from g_output_stream_write() to
g_output_stream_write_async() we fix the EAGAIN issue. For GSocket, we
still need to handle things manually (by creating a GSource) as
g_socket_send_message() is used.
We check the new behavior in Michael's producer/consumer test case (at
/gdbus/overflow in gdbus-peer.c) added in the last commit.
Also add a test case that sends and receives a 20 MiB message.
Also add a new `transport' G_DBUS_DEBUG option so it is easy to
inspect partial writes:
$ G_DBUS_DEBUG=transport ./gdbus-connection -p /gdbus/connection/large_message
[...]
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 0 on a GSocketOutputStream
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 128000 on a GSocketOutputStream
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 256000 on a GSocketOutputStream
[...]
========================================================================
GDBus-debug:Transport:
>>>> WROTE 43669 bytes of message with serial 4 and
size 20971669 from offset 20928000 on a GSocketOutputStream
[...]
========================================================================
GDBus-debug:Transport:
<<<< READ 16 bytes of message with serial 3 and
size 20971620 to offset 0 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 15984 bytes of message with serial 3 and
size 20971620 to offset 16 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 16000 bytes of message with serial 3 and
size 20971620 to offset 16000 from a GSocketInputStream
[...]
========================================================================
GDBus-debug:Transport:
<<<< READ 144000 bytes of message with serial 3 and
size 20971620 to offset 20720000 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 107620 bytes of message with serial 3 and
size 20971620 to offset 20864000 from a GSocketInputStream
OK
https://bugzilla.gnome.org/show_bug.cgi?id=626748
Signed-off-by: David Zeuthen <davidz@redhat.com>
Previously if a GSocketConnection had a blocking GSocket, it would
sometimes block during asynchonous I/O, and if it had a non-blocking
socket, it would sometimes return G_IO_ERROR_WOULD_BLOCK from
synchronous I/O. This fixes the connection to not depend on the socket
state.
https://bugzilla.gnome.org/show_bug.cgi?id=616458
This prints all GDBusMethodInvocation API usage and is normally used
with the `incoming' option. Example:
# G_DBUS_DEBUG=incoming,return ./polkitd --replace
Entering main event loop
Connected to the system bus
Registering null backend at priority -10
[...]
Acquired the name org.freedesktop.PolicyKit1
[...]
========================================================================
GDBus-debug:Incoming:
<<<< METHOD INVOCATION org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
invoked by name :1.26
serial 299
========================================================================
GDBus-debug:Return:
>>>> METHOD ERROR org.freedesktop.PolicyKit1.Error.Failed
message `Cannot determine session the caller is in'
in response to org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
to name :1.26
reply-serial 299
[...]
========================================================================
GDBus-debug:Incoming:
<<<< METHOD INVOCATION org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
invoked by name :1.2402
serial 25
========================================================================
GDBus-debug:Return:
>>>> METHOD RETURN
in response to org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
to name :1.2402
reply-serial 25
Signed-off-by: David Zeuthen <davidz@redhat.com>
Also use this in the test cases to check that serialization to and
from both big and little endian works.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Since using the function pointer version muddles the memory management
requirements of language bindings, we should implement a GClosure-based
variant on top of g_object_bind_property_full().
https://bugzilla.gnome.org/show_bug.cgi?id=622278
Otherwise e.g. setuid root processes can't connect to the system
bus. This was discovered when porting PolicyKit's pkexec(1) command to
a PolicyKit library using GDBus.
Signed-off-by: David Zeuthen <davidz@redhat.com>
- Make GCredentials instance and class structures private so it can't
be subclassed and we don't have to worry about ABI compat
issues. This also allows us to get rid of the GCredentialsPrivate
struct.
- Add a GCredentialsType enumeration that is used whenever exchanging
pointers with the user. This allows us to support OSes with
multiple native credential types. In particular, it allows
supporting OSes where the native credential evolves or even changes
over time.
- Add g_socket_get_credentials() method.
- Add tests for g_socket_get_credentials(). Right now this is in the
GDBus peer-to-peer test case but we can change that later.
- Move GTcpConnection into a separate gtk-doc page as was already
half-done with GUnixConnection. Also finish the GUnixConnection
move and ensure send_credentials() and receive_credentials()
methods are in the docs. Also nuke comment about GTcpConnection
being empty compared to its superclass.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is currently unused but might be useful in the future. For
example, it might be nice with a way to bypass the current queue of
outgoing messages - having a flag enumeration allows us to add a
G_DBUS_SEND_MESSAGE_FLAGS_BYPASS_QUEUE etc. etc.
This commit breaks ABI and API. Users of the (rarely used) API to send
messages will have to port to this new API.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is currently unused but will probably be useful in the
future. For example, we could have a _ARG0_IS_PATH to specify that
arg0 should be used for arg0path.
This commit breaks API and ABI. Users of
g_dbus_connection_signal_subscribe() will need to port to this new
version.
Signed-off-by: David Zeuthen <davidz@redhat.com>
... so it is async, cancelable and returns an error. Also provide a
synchronous version.
This is an API/ABI break but it is expected that only very few
applications use this API.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Remove some symbols from glib-sections.txt that gtk-doc has no idea
about.
Add proper callback typedefs for GTester (gtk-doc dislikes inline
function types).
Fix some other minor issues.
- add G_VARIANT_TYPE_BYTESTRING, _BYTESTRING_ARRAY, _STRING_ARRAY
- remove g_variant_{new,get}_byte_array functions
- add g_variant_{new,get,dup}_bytestring{,_array} functions
- remove undocumented support for deserialising arrays of objectpaths
or signature strngs using g_variant_get_strv()
- add and document new format strings '^ay', '^&ay', '^aay' and '^a&ay'
- update GApplication to use the new API
- update GSettings binding code to use the new API
- add tests
E.g. move these C structures out of public header files and into their
respective C files. Also nuke padding since this is no longer needed.
This leaves only GDBusProxy as an extendable type.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Also add a 'address' G_DBUS_DEBUG option that will print out useful
debug information such as
GDBus-debug:Address: In g_dbus_address_get_for_bus_sync() for bus type `session'
GDBus-debug:Address: env var DBUS_SESSION_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_SYSTEM_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_STARTER_BUS_TYPE is not set
GDBus-debug:Address: Running `dbus-launch --autolaunch=05e508961149264c9b750a4c494aa6f7 --binary-syntax --close-stderr' to get bus address (possibly autolaunching)
GDBus-debug:Address: dbus-launch output:
0000: 75 6e 69 78 3a 61 62 73 74 72 61 63 74 3d 2f 74 unix:abstract=/t
0010: 6d 70 2f 64 62 75 73 2d 77 42 41 6f 4b 59 49 52 mp/dbus-wBAoKYIR
0020: 7a 75 2c 67 75 69 64 3d 30 34 30 64 31 33 66 33 zu,guid=040d13f3
0030: 30 61 30 62 35 32 63 32 30 66 36 32 63 34 31 63 0a0b52c20f62c41c
0040: 30 30 30 30 35 30 38 64 00 d2 38 00 00 01 00 40 0000508d..8....@
0050: 05 00 00 00 00 .....
GDBus-debug:Address: dbus-launch stderr output:
14542: Autolaunch enabled (using X11).
14542: --exit-with-session automatically enabled
14542: Connected to X11 display ':0.0'
14542: === Parent dbus-launch continues
14542: Waiting for babysitter's intermediate parent
14542: Reading address from bus
14542: Reading PID from daemon
14542: Saving x11 address
14542: Created window 88080385
14542: session file: /root/.dbus/session-bus/05e508961149264c9b750a4c494aa6f7-0
14542: dbus-launch exiting
GDBus-debug:Address: Returning address `unix:abstract=/tmp/dbus-wBAoKYIRzu,guid=040d13f30a0b52c20f62c41c0000508d' for bus type `session'
and
GDBus-debug:Address: In g_dbus_address_get_for_bus_sync() for bus type `session'
GDBus-debug:Address: env var DBUS_SESSION_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_SYSTEM_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_STARTER_BUS_TYPE is not set
GDBus-debug:Address: Running `dbus-launch --autolaunch=05e508961149264c9b750a4c494aa6f7 --binary-syntax --close-stderr' to get bus address (possibly autolaunching)
GDBus-debug:Address: dbus-launch output:
0000: 75 6e 69 78 3a 61 62 73 74 72 61 63 74 3d 2f 74 unix:abstract=/t
0010: 6d 70 2f 64 62 75 73 2d 77 42 41 6f 4b 59 49 52 mp/dbus-wBAoKYIR
0020: 7a 75 2c 67 75 69 64 3d 30 34 30 64 31 33 66 33 zu,guid=040d13f3
0030: 30 61 30 62 35 32 63 32 30 66 36 32 63 34 31 63 0a0b52c20f62c41c
0040: 30 30 30 30 35 30 38 64 00 d2 38 00 00 01 00 40 0000508d..8....@
0050: 05 00 00 00 00 .....
GDBus-debug:Address: dbus-launch stderr output:
14549: Autolaunch enabled (using X11).
14549: --exit-with-session automatically enabled
14549: Connected to X11 display ':0.0'
14549: dbus-daemon is already running. Returning existing parameters.
14549: dbus-launch exiting
GDBus-debug:Address: Returning address `unix:abstract=/tmp/dbus-wBAoKYIRzu,guid=040d13f30a0b52c20f62c41c0000508d' for bus type `session'
Note that things work exactly like libdbus, e.g. from the
dbus-launch(1) man page:
Whenever an autolaunch occurs, the application that had to start a
new bus will be in its own little world; it can effectively end up
starting a whole new session if it tries to use a lot of bus
services. This can be suboptimal or even totally broken, depending
on the app and what it tries to do.
[...]
You can always avoid autolaunch by manually setting
DBUS_SESSION_BUS_ADDRESS. Autolaunch happens because the default
address if none is set is "autolaunch:", so if any other address is
set there will be no autolaunch. You can however include autolaunch
in an explicit session bus address as a fallback, for example
DBUS_SESSION_BUS_ADDRESS="something:,autolaunch:" - in that case if
the first address doesn't work, processes will autolaunch. (The bus
address variable contains a comma-separated list of addresses to
try.)
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add a <flags> tag to the schema file format and a flags='' attribute to
go along with. Add some extra test cases for those.
Add new g_settings_{get,set}_flags() calls and support binding to
GParamSpecFlags properties. Add test cases.
This commit adds the following G_DBUS_DEBUG flags
- emission
- incoming
- call
- signal
- payload
https://bugzilla.gnome.org/show_bug.cgi?id=620913
Signed-off-by: David Zeuthen <davidz@redhat.com>
Without this guarantee, peer-to-peer connections are not very
useful. However, with this guarantee it's possible to export objects
in a handler for the GDBusServer::new-connection signal.
There are two caveats with this patch
- it won't work on message bus connections
- we don't queue up messages to be written
that can be addresses later if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=623142
Signed-off-by: David Zeuthen <davidz@redhat.com>
Having this tool in GLib is a bad idea for a number of reasons:
- experience has shown that the simple file format was a bad idea
- the tool is currently implemented with a hack that would require a
dependency inversion to solve (the tool needs to depend on Python
GVariant bindings)
- the tool itself is unmaintained
It will be moved to the GConf git repository so people can continue to
use it for the purpose of converting GConf schemas.
GBinding is a simple, opaque object that represents a binding between a
property on a GObject instance (source) and property on another GObject
instance (target).
https://bugzilla.gnome.org/show_bug.cgi?id=348080
g_object_notify_by_pspec() will emit the "notify" signal on the given
pspec, short-circuiting the hash table lookup needed by
g_object_notify(). The suggested and documented way of using
g_object_notify_by_pspec() is similar to the way of emitting signals
with their ID.
Emission tests (with no handler attached to the notify signal) show a
10-15% speedup over using g_object_notify().
https://bugzilla.gnome.org/show_bug.cgi?id=615425
Allow constructing a GDBusProxy for well-known names as discussed here
http://mail.gnome.org/archives/gtk-devel-list/2009-October/msg00075.html
including test cases.
Make it possible to create a GDBusProxy for a GBusType instead of a
GDBusConnection. This requires G_BUS_TYPE_NONE so add that too.
Nuke g_bus_watch_proxy() since one can now more or less use GDBusProxy
for this.
Port gdbus-example-watch-proxy to this new API and include this
example in the GDBusProxy doc page.
Also nuke the GType parameter from the GDBusProxy constructors as
requested here: https://bugzilla.gnome.org/show_bug.cgi?id=621229
Also update the porting guide and other API docs for this change.
Also fix a bug in the signal dispatching code so each subscriber only
get notified once, not N times, for the same signal. Also add a test
case for this.
https://bugzilla.gnome.org/show_bug.cgi?id=621213
Signed-off-by: David Zeuthen <davidz@redhat.com>
accept more than one callback.
g_bus_own_name_with_closures
g_bus_own_name_on_connection_with_closures
g_bus_watch_name_with_closures
g_bus_watch_name_on_connection_with_closures
g_bus_watch_proxy_with_closures
g_bus_watch_proxy_on_connection_with_closures
https://bugzilla.gnome.org/show_bug.cgi?id=621092
This adds a GApplication object to GIO, which is the core of
an application support class, supporting
- uniqueness
- exporting actions (simple scripting)
- standard actions (quit, activate)
The implementation for Linux uses D-Bus, takes a name on the
session bus, and exports a org.gtk.Application interface.
Implementations for Win32 and OS X are still missing.
add GSimplePermission, a trivial const implementation of GPermission
can-request and can-release are always false for this implementation and
the value of 'allowed' is decided at construction.
This adds static markers for dtrace, which are also usable
by systemtap. Additionally it adds a tapset for systemtap
that makes it easier to use the static markers.
These are enabled by default.
This initial set of probes is rather limited:
* allocation and free using g_malloc & co
* allocation and free using g_slice
* gquark name tracking (useful for converting quarks to strings in probes)
Notes on naming:
Its traditional with dtrace to use probe names with dashes as
delimiter (slice-alloc). Since dashes are not usable in identifiers
the C code uses double underscores (slice__alloc) which is converted
to dashes in the UI. We follow this for the shared lowlevel probe
names.
Additionally dtrace supports putting a "provider" part in the probe
names which is essentially a namespacing thing. On systemtap this
field is currently ignored (but may be implemented in the future), but
this is not really a problem since in systemtap the probes are
specified by combining the solib file and the marker name, so there
can't really be name conflicts.
For the systemtap tapset highlevel probes we instead use names that
are systemtapish with single dashes as separators.
https://bugzilla.gnome.org/show_bug.cgi?id=606044
Fixup for commit 133f66538d which
duplicated the contents of most of the migration documentation by
splitting it out into separate files but keeping the original file
intact (with a rename).
This removes the duplicated content from the renamed file.
This uncovered a bug in name watching if the name wasn't activatable.
Also provoked the need for on_connection variants of g_bus_watch_name
(added g_bus_watch_proxy's variant as well).
This makes it possible to use the cached properties mechanism even if
constructing the proxy with the DO_NOT_LOAD_PROPERTIES flag.
This is useful for cases where you obtain the and track object
properties out-of-band. For example, in udisks, the plan is to have
something like this
Manager.GetObjects (out ao paths, out aa{sa{sv}} all_properties);
Manager.ObjectAdded (o path, a{sa{sv}} all_properties);
Manager.ObjectChanged (o path, a{sa{sv}} all_properties);
Manager.ObjectRemoved (o path, a{sa{sv}} all_properties);
E.g. the first GetObjects() call will return *all* data about *all*
exported objects. Further, this way a client will only need to listen
these three signals (three AddMatch) on the Manager object and it will
never need to do GetAll() etc (e.g. can use DO_NOT_LOAD_PROPERTIES).
(Of course this only works if the client is interested in all
objects... while this is true for udisks it is generally not true for
other D-Bus services).
Also use expected_interface to check for programming errors.
Lots of people been suggesting this. We still use MethodInvocation /
method_invocation for handling incoming method calls so use call()
instead of invoke_method() helps to separate the client and server
facilities. Which is a good thing(tm).
There are apparently two incompatible ways of naming abstract sockets:
pad the sockaddr with 0s and use the entire thing as the name, or else
don't, and just pass a shorter length value to the relevant functions.
We previously only supported the former method. Add support for the
latter.
Also correctly handle "anonymous" unix sockaddrs (eg, the client side
of a connection, or a socketpair() socket), and add unix domain socket
support to the socket-client and socket-server test programs to make
sure this all works.
https://bugzilla.gnome.org/show_bug.cgi?id=615960
Merge GVariant variable arguments support and put it under tests.
Also, remove the hack of the test case directly '#include'ing .c files
from glib/. Instead, create a non-installed gvariant-internal.h that
the tests can include and make the symbols in it visible on the symbol
table of the shared library. These symbols (as they are present in no
installed header files) are not part of the API of GLib.
Increase test coverage in a few other areas.
Add support for a mutex lock that consumes only one bit of storage
inside of an integer on systems that support futexes. Futex is emulated
(at a higher cost) on systems that don't have it -- but only in the
contended case.
We now allow g_thread_init(NULL) to be called after other glib calls (with
some minor limitations). This is mainly a documentation change as this
really was already possible.
We also allow g_thread_init() to be called multiple times. Only the
first call actually initializes the threading system, further calls
are ignored (but print a warning if the argument is not NULL).
https://bugzilla.gnome.org/show_bug.cgi?id=606775
Previous code used g_mkstemp(). But when using
G_FILE_CREATE_REPLACE_DESTINATION, no attempt was made to ensure proper
mode and flags of the created temporary file. The visible issue was that
the file was always created with mode 0600 as opposed to using 0666.
(The invisible issue was that O_RDWR was used instead of O_WRONLY.)
This function exposes more variables than g_mkstemp() and therefor
allows more flexibility when creating temporary files.
The intended use is gio's code for g_file_replace() (see next patch)
This patch only adds the function. The function is a NOP.
See the API documentation for a rationale.
Part of: Bug 591388 - number of GCancellables available is too limited
For details, see bug 587482. The new api:
- Provide new _with_operation() variants of all unmount and eject methods
- Add GMountOperation::show-processes signal
- this can be used to show processes blocking an unmount operation
- Deprecate all unmount and eject methods
- Add g_drive_can_start_degraded() method
- this is to avoid auto-starting degraded drives
- Make g_drive_stop() resp. g_file_stop_mountable() take a GMountOperation
- these ops were recently added and not yet public API so it's fine
to change how they work
- Provide a way to poll mountable files, e.g. g_file_poll_mountable()
- Add some missing file attributes for mountable files
- G_FILE_ATTRIBUTE_MOUNTABLE_UNIX_DEVICE_FILE
- needed for the GDU Nautilus extensions to format a volume
- G_FILE_ATTRIBUTE_MOUNTABLE_CAN_START_DEGRADED:
- mimics g_drive_can_start_degraded()
- G_FILE_ATTRIBUTE_MOUNTABLE_CAN_POLL:
- mimics g_drive_can_poll_for_media()
- G_FILE_ATTRIBUTE_MOUNTABLE_IS_MEDIA_CHECK_AUTOMATIC
- mimics g_drive_is_media_check_automatic()
Add API for starting/stopping drives. This new API will enable
GVolumeMonitor and GVfs implementations to add support for the
following features
1. Powering down external hard disk enclosures / drives
2. Starting/stopping multi-disk devices (such as RAID/btrfs/ZFS)
3. Connecting/disconnecting iSCSI devices
4. Reacting to the user pressing e.g. the "remove drive" button on
a IBM/Lenovo Ultrabay: http://www.thinkwiki.org/wiki/Ultrabay
See the bug for the corresponding GVfs and Nautilus changes.
The whole protocol name thing is pretty weird. The getprotobyname functions
seem to only specify one mapping for name <-> ids, so all families/types
must use the same values. Plus the values used for the protocols are
standardized by IANA, so are always the same.
So, we drop using names for protocols, intead introducing an enum with
a few commonly availible and used protocols.
Higher-level wrappers around GResolver. GSocketConnectable provides an
interface for synchronously or asynchronously iterating multiple
socket addresses, with GNetworkAddress and GNetworkService providing
interfaces based on hostname and SRV record resolution.
Part of #548466.
GResolver provides asynchronous (and synchronous-but-cancellable) APIs
for resolving hostnames, reverse-resolving IP addresses back to
hostnames, and resolving SRV records. Part of #548466.
Types and methods for dealing with IPv4 and IPv6 addresses (and UNIX
domain socket addresses under UNIX). This does not include code for
actual socket I/O.
Originally from "gnio". Much of the code was written by Christian
Kellner, Samuel Cormier-Iijima, and Ryan Lortie.
Part of #548466.
Functions for converting between UTF-8 IDNs (Internationalized Domain
Names) and their ASCII-Compatible Encodings, plus a function to recognize
IP addresses. Part of #548466.
There are race conditions when connecting and disconnecting from the
"cancelled" signal on GCancellable which you need to do when
implementing cancellable operations. This adds helper functions that
avoid these races and mentions these races in the docs. (#572844)
Update various README files to refer to git instead of svn.
Add a README.commits that is pretty much a copy of the same file
in GTK+. Also discontinue ChangeLog files.
* gio/gio-docs.xml:
* glib/glib-docs.sgml:
* gobject/gobject-docs.sgml:
Add online urls for library.gnome.org. This allows other docs to do
gtkdoc-rebase --online --html-dir=html
before publishing docs and have working xrefs.
svn path=/trunk/; revision=7853
2009-01-28 Ryan Lortie <desrt@desrt.ca>
Bug 568575 – _async functions for GDataInputStream
* gdatainputstream.h:
* gdatainputstream.c: add _async versions of read_line and read_until.
* gio.symbols:
* ../docs/reference/gio/gio-sections.txt: add new functions
* tests/sleepy-stream.c: new test case for async read line
* tests/Makefile.am: add new test
svn path=/trunk/; revision=7835
* docs/reference/glib/Makefile.am:
Add SCAN_OPTIONS=--ignore-decorators="GLIB_VAR" to Makefile.am to fix
on problem with the doc build.
svn path=/trunk/; revision=7829
2009-01-20 Ryan Lortie <desrt@desrt.ca>
Bug 568394 – dropping the last reference to a stream filter closes the
base stream
* gfilterinputstream.h:
* gfilterinputstream.c: add "close-base-stream" property and only
close the base stream if it is true. issue async close callbacks from
correct source object.
* gfilteroutputstream.h:
* gfilteroutputstream.c: add a "close-base-stream" property and only
close the base stream if it is true. issue async close callbacks from
correct source object.
* gbufferedoutputstream: check g_filter_output_stream_get_close_base()
before closing the base stream. fix invalid source tag comparison in
close_async (was comparing to flush_async).
* ../docs/reference/gio/gio-sections.txt:
* gio.symbols: add
g_filter_{in,out}put_stream_{g,s}et_close_base_stream
* tests/filter-streams.c: new test cases
* tests/Makefile.am: add new test
* tests/.gitignore: add new test
svn path=/trunk/; revision=7825
2009-01-13 Matthias Clasen <mclasen@redhat.com>
Bug 564728 Add function to decode base64 encoded data in place
* glib/glib.symbols:
* glib/gbase64.[hc] (g_base64_decode_inplace): New convenience
API to decode in place, overwriting the input string. Patch by
Sebastian Dröge.
svn path=/trunk/; revision=7807
* gio.symbols:
* gunixinputstream.[hc]:
* gunixoutputstream.[hc]: Add "fd" and "close-fd" properties
including getters and setters. Patch by Maciej Piechotka
svn path=/trunk/; revision=7735
2008-12-07 Behdad Esfahbod <behdad@gnome.org>
Bug 563150 – G_GU?INT*_MODIFIER/FORMAT docs
* glib/tmpl/glib-unused.sgml:
* glib/tmpl/macros_misc.sgml:
* glib/tmpl/types.sgml:
Update docs to mention scanning as well as printing.
Cross reference these from their respective types.
svn path=/trunk/; revision=7730
2008-12-01 Alexander Larsson <alexl@redhat.com>
* gio.symbols:
* gmount.[ch]:
* gunionvolumemonitor.c:
* gvolume.c:
Add and document g_mount_is_shadowed plus calls
to set/unset a mount as shadowed
svn path=/trunk/; revision=7716
* gobject/tut_gtype.xml: Remove the questionable closing sentence
and all references to private functions. Pointed out by Christian
Dywan.
svn path=/trunk/; revision=7711
* gio.symbols:
* gappinfo.[hc]: Add g_app_info_get_commandline. Requested
by Hans Petter Jansson.
* gdesktopappinfo.c: And implement it here.
svn path=/trunk/; revision=7706
