Currently this function calls `g_warning()` explicitly. It would be
nicer to properly propagate these failure up to the caller that tried to
initialise us.
`read_netlink_messages()` is the callback attached to the netlink socket
(G_IO_IN). It calls `g_socket_receive_message()`. There is a race
condition that if the socket is closed while there is a pending call, we
will try to receive on a closed socket, which fails.
To avoid this, we switch the order of the operations around: first
destroy the source and then close the socket.
This is not a correct way to check if `g_socket_new_from_fd()` failed.
Instead just see if it returned `NULL` itself.
This was preventing the netlink monitor from being initialised.
Closes#1518
All the other initialisation failure paths set a GError, but this one
didn’t. Set a GError to avoid breaking the invariant that returning
FALSE should always have a GError set.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1523
This is a speculative fix for epiphany#533, which we think might be
caused by xdg-desktop-portal not ever being started. This service is
started on-demand, not automatically.
1) Remove the non-Windows-only condition for subdir('tests').
2) Add libiphlpapi, libws2_32 and libsecur32 deps, needed for W32 tests.
3) Remove the -no-undefined argument (gcc doesn't understand it,
it *does* understand -Wl,-no-undefined; either way, the test
compiles without this argument just fine; maybe meson adds it
by itself - you can hardly build shared modules without it).
4) Add or fix a number of includes
5) Disable gdbus-objectmanager tests when building with MSVC
(right now these tests don't work on Windows anyway, so the fact
that MSVC can't even build them properly is irrelevant;
most likely gdbus-codegen needs changes to put _GLIB_EXTERN
before each function)
G_FILE_ATTRIBUTE_DOS_IS_MOUNTPOINT allows mountpoints
(NTFS reparse points with IO_REPARSE_TAG_MOUNT_POINT tag) to
be told apart from symlinks (NTFS reparse points with
IO_REPARSE_TAG_SYMLINK tag), even though both are reported
by glib as "symlinks".
G_FILE_ATTRIBUTE_DOS_REPARSE_POINT_TAG allows the exact
reparse tag value to be obtained by the user. This way
even more exotic reparse points can be identified and
handled by the user (glib itself currently has no code
to work with any reparse points that are not symlinks
or mountpoints).
The existing code was generating code with undefined results that modern compilers warn about:
accounts-generated.c:204:23: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
(GDBusArgInfo **) &_accounts_accounts_method_info_list_cached_users_OUT_ARG_pointers,
It wasn’t being tested. It should behave the same as
g_list_model_get_item(), so write a wrapper for the two.
This brings the code coverage of glistmodel.c up to 100%.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When setting the GListStore:item-type property we need to check the
GType is a GObject (or subclass). There was some explicit code for this,
but when actually testing it and looking at the code coverage, it turns
out that the GObject property type check coming from
g_param_spec_gtype() does everything we want, and the custom
g_critical() can never be hit. So turn it into an assertion.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This is also faster, though I doubt anyone's able to measure it.
The previous code was a more complicted way to do the same thing and it
was likely written the more complicated way because it fell out commit
758d7073a9 when fixing
https://bugzilla.gnome.org/show_bug.cgi?id=795307
There are many cases where a default TLS database is not able to be
defined within the constraints of a system. For example glib-networking
(or glib-openssl) cannot retrieve the default certificate store on iOS
or Android and need to be initialized from a cert file of certificates
bundled with the application.
Previously GStreamer was relying on a custom patch to glib-networking to
populate the default database from the file pointed to by the
CA_CERTIFICATES environment variable however the mechanism that enabled
this was recently remove from glib-networking.
Adding a more generic g_tls_backend_set_default_database() API allows
application developers to override the default database using their own
certificates as well as allowing equivalent functionality on Android/iOS
(or others) as on the default database handling Linux.
Fixes https://gitlab.gnome.org/GNOME/glib-networking/issues/35
The ::network-changed signal is documented to indicate any change in
network configuration, which doesn't necessarily imply a property
change - additional services becoming available after connecting to
a VPN comes to mind for instance.
In order to match the "native" network monitor's behavior, always
emit the signal when it's in response to the 'changed' D-Bus signal.
Also emit the signal unconditionally when loading the initial property
values, to allow clients to differentiate between "offline" meaning
"offline" and "offline" meaning "uninitialized".
With 0d685b4946, we now encode resource
data as a string. Strings have trailing nul terminators. A C compiler
will happily ignore the fact that the nul terminator exceeds the stated
array length, and will drop it — but a C++ compiler won’t, and will
raise:
error: initializer-string for array of chars is too long [-fpermissive]
Fix that by increasing the array length by 1, and subtracting it again
in the GStaticResource struct.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This reverts commit 3c1902fcf9.
This was accidentally re-added from an old version of the branch before
!265 was merged. It should not have been re-added.
Rearrange the code so we try version 3 first,
falling back to version 2 and then version 1.
We still do a construct-time check to ensure
that we work with unsupported versions.
Note that this also takes care of setting the
initial property values in the version 1 case.
Version 3 of the network monitor portal interface adds
a CanReach method. Use it to implement can_reach.
The docs state that can_reach will either return TRUE
or set an error. So, set an error of G_IO_ERROR_HOST_UNREACHABLE
when the portal returns FALSE for CanReach.
GSettings XML schema files are installed in a well known directory
under Glib's installation directory: `glib-2.0/schemas`. However,
the Glib installation directory might vary, so the exact location of
the schema files might be unknown.
The information regarding this directory has been added to GIO's
pkg-config file, so it can be checked, and also overrided, by using
the command line utility.
The source callback for a GCancellable should have the cancellable itself
as first argument.
This was not the case, and when this code was hit, we were instead trying
to treat the pointer as a CommunicateState reference and thus wrongly
deferencing it, causing a memory error and a crash.
Some Testing revealed encoding resource data with string
escape codes to compile significantly quicker compared
to the same data encoded as an array with hexadecimal numbers.
See #1489
This is a follow-up to commit 614adf8a75,
which started generating two new files as part of the test; they need to
be cleaned up before distcheck will pass.
Ideally, the test should run a temporary directory and wipe that
directory itself before exiting, but that’s a bit of a big change to
make right now. Deferred to
https://gitlab.gnome.org/GNOME/glib/issues/1495.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
In file gio/gtestdbus.c, function watch_parent, there is a loop which
waits for commands sent from the parent process and kills all processes
recorded in 'pids_to_kill' array on parent process exit. The detection
of parent process exit is done by calling g_poll and checking whether
the returned event is G_IO_HUP. However, 'revents' is a bit mask, and
we should use a bitwise-AND check instead of the equality check here.
It seems to work fine on Linux, but it fails on FreeBSD because the
g_poll returns both G_IO_IN and G_IO_HUP on pipe close. This means the
watcher process continues waiting for commands after the parent process
exit, and g_io_channel_read_line returns G_IO_STATUS_EOF with 'command'
set to NULL. Then the watcher process crashes with segfault when calling
sscanf because 'command' is NULL. Since the test result is already
reported by the parent process as 'OK', this kind of crash is likely to
be unnoticed unless someone checks dmesg messages after the test:
pid 57611 (defaultvalue), uid 1001: exited on signal 11
pid 57935 (actions), uid 1001: exited on signal 11
pid 57945 (gdbus-bz627724), uid 1001: exited on signal 11
pid 57952 (gdbus-connection), uid 1001: exited on signal 11
pid 57970 (gdbus-connection-lo), uid 1001: exited on signal 11
pid 57976 (gdbus-connection-sl), uid 1001: exited on signal 11
pid 58039 (gdbus-exit-on-close), uid 1001: exited on signal 11
pid 58043 (gdbus-exit-on-close), uid 1001: exited on signal 11
pid 58047 (gdbus-exit-on-close), uid 1001: exited on signal 11
pid 58051 (gdbus-exit-on-close), uid 1001: exited on signal 11
pid 58055 (gdbus-export), uid 1001: exited on signal 11
pid 58059 (gdbus-introspection), uid 1001: exited on signal 11
pid 58065 (gdbus-names), uid 1001: exited on signal 11
pid 58071 (gdbus-proxy), uid 1001: exited on signal 11
pid 58079 (gdbus-proxy-threads), uid 1001: exited on signal 11
pid 58083 (gdbus-proxy-well-kn), uid 1001: exited on signal 11
pid 58091 (gdbus-test-codegen), uid 1001: exited on signal 11
pid 58095 (gdbus-threading), uid 1001: exited on signal 11
pid 58104 (gmenumodel), uid 1001: exited on signal 11
pid 58108 (gnotification), uid 1001: exited on signal 11
pid 58112 (gdbus-test-codegen-), uid 1001: exited on signal 11
pid 58116 (gapplication), uid 1001: exited on signal 11
pid 58132 (dbus-appinfo), uid 1001: exited on signal 11
If the watcher process crashes before killing the dbus-daemon process
spawned by the parent process, the dbus-daemon process will keep running
after all tests complete. Due to the implementation of 'communicate'
function in Python subprocess, it causes meson to crash. 'communicate'
assumes the stdout and stderr pipes are closed when the child process
exits, but it is not true if processes forked by the child process
doesn't exit. It causes Python subprocess 'communicate' function to
block on the call to poll until the timeout expires even if the test
finishes in a few seconds. Meson assumes the timeout exception always
means the test is still running. It calls 'communicate' again and
crashes because pipes no longer exist.
https://gitlab.gnome.org/Infrastructure/GitLab/issues/286https://github.com/mesonbuild/meson/issues/3967https://bugs.python.org/issue30154
Previously, glocalfile.c would not set file system metadata for
the free/used key for file systems which reported 0 free space. This is
because some file systems don’t set that metadata when you call
statfs(), so we can’t reliably report it. However, some do, and they
can legitimately set f_bavail and f_bfree to 0 if the file system is
full.
In order to avoid that, always set the file system metadata unless the
file system is FUSE or ncpfs.
This is a partial revert of commit 0b9f24c1e1: instead of the changes
made in that commit, I think we should maintain a blacklist of file
systems which are known to not correctly report free space.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/328
Similar issue was fixed with commit f929d148, but it's happening again.
Define G_MESSAGES_DEBUG=all when running CI to ensure we won't regress
anymore.
In order to determine whether to trash a file to the home directory, we
compare its st_dev to our home directory's st_dev field.
This is the wrong thing to do on overlayfs when deleting files, because
st_dev contains the ID of the filesystem providing the file (which can
be the lower or upper filesystem), but directories always return the ID
of the overlayfs. Thus the comparison fails and we are unable to trash
the file.
Fix this by checking st_dev of the parent directory when we are deleting
a file.
Also adjust `test_trash_not_supported` for this - make its st_dev check
look at the parent directory's `st_dev` rather than the temporary file's
own.
Fixes#1027.
The documentation was unclear about what error codes would be returned
on attempting to open an empty or corrupt GVDB file. Previous versions
of the documentation incorrectly said that corrupt GVDB files were
considered equivalent to empty ones.
A recent commit has clarified the documentation to include its error
handling behaviour.
Update the two users of GVDB within GLib, GResource and GSettingsSource,
to follow this change, and add unit tests for them both.
Other users of the GVDB copylib will need to update their copy and make
appropriate changes if they have bugs in their handling of this
situation. dconf is one example of this. GVDB should be updated from
https://gitlab.gnome.org/GNOME/gvdb.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1454
While mountpoints are *not* symlinks, strictly speaking,
they works in a similar enough way, so consider them to be
symlinks for the purpose of querying local file info.
On Windows st_ctime field is the file creation time.
POSIX mandates that field to be the file state change time.
Naturally, glib code interpreted st_ctime as POSIX suggested,
and the result was bad.
Fix this by introducing special W32-only logic for setting
attributes from st_ctime field.
Fixes issue #1452.
We now send the fallback SCSV, meaning use of this function will cause
modern servers to immediately terminate the connection, so let's warn
API users to expect that behavior and be crystal clear that this
function should only be used as a fallback when a normal connection
attempt has already failed.
Also, the documentation is mostly duplicated between the property and
the function, so let's just reference the function documentation from
the property.
7efd76dd67 added these configure time tests to work around a bug
with older Android. Since the test didn't take Windows into account it
wrongfully applied the workaround on Windows too, breaking the build.
With meson this wasn't an issue since the check is skipped on Windows there
and our CI didn't catch this issue.
Change the test to run on Android only for meson and autotools.
This also makes it clear that the test+code can be dropped again if we stop
supporting older Android versions at some point.
GLib currently tries to use FAM volume monitor for monitoring files
within home on NFS. If FAM support is not available, it fallbacks by
default to GInotifyFileMonitor. I think we should fallback to
GPollFileMonitor instead, because inotify is not reliable on NFS,
which may cause issues for dconf. With this patch, it should be safe to
not build libgiofam and still be sure that dconf works properly if home
is mounted on NFS. I think this might be a first step to remove FAM
support from GLib completely, because gamin is buggy and dead for
several years already. Gamin just polls files on NFS anyway. This
change applies on files only, because GPollFileMonitor seems doesn't
support dirs, however it should be enough for dconf. The other
drawback is that one can't set poll timeout currently. Just a note
that this can still be overwritten by GIO_USE_FILE_MONITOR.
Releasing GVolumeMonitor before g_volume_mount finish cause that
g_volume_get_mount returns NULL, because the mount is not correctly
propagated to the volume.
https://gitlab.gnome.org/GNOME/glib/issues/1458
The gresource code uses libelf if available but that also depends on mmap but isn't
guarded with HAVE_MMAP. This can make the build fail under MSYS2 where a mingw version
of libelf exists but there is no mmap.
Instead of guarting the libelf code with HAVE_LIBELF add a new macro named USE_LIBELF
which is only defined if libelf and mmap support are available.
Also install the mingw libelf version for CI so we catch similar errors in the future.
It is a bug if we distribute files which are generated at build time —
they should be built on the machine which is compiling GLib, not be
shipped in the tarball.
This brings the autotools-generated tarball in line with the
ninja-generated one, with the exception of man pages and gtk-doc HTML
output.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The documentation claims that g_volume_get_mount should succeed after
g_volume_mount. Let's update mounts before releasing g_volume_mount to
be sure that the mount is added to the corresponding volume. The same
is done in GVfsUDisks2VolumeMonitor.
https://gitlab.gnome.org/GNOME/glib/issues/1458
The network monitor portal interface is changing.
Version 2 is no longer using properties, but getters
instead (this lets the portal apply access control
and avoid sending information to non-networked
sandboxes).
To support both version 1 and 2 of the interface,
we stop using generated code and instead deal with
the api differences in our own code, which is not
too difficult.
Support version 1 as well
The new python module, added with 0.46, works with Python 2 and 3 and
allows to pass a path for the interpreter to use, if the need arises.
Previously the meson build set PYTHON, used in the shebang line of
the scripts installed by glib, to the full path of the interpreter.
The new meson module doesn't expose that atm, but we should set it to
a executable name anyway, and not a full path.
Several of our tools are installed and are used by other projects to
generate code. However, there is no 'install' when projects use glib
as a subproject.
We need some way for glib to 'provide' these tools so that when some
project uses glib as a subproject, find_program('glib-mkenums') will
transparently return the glib-mkenums we just built.
Starting from Meson 0.46, this can be done with the
`meson.override_find_program()` function.
As a bonus, the Meson GNOME module will also use these
'overriden'/'provided' programs instead of looking for them in PATH.
PEP8 says that:
"Comparisons to singletons like None should always be done with is or
is not, never the equality operators."
glib uses a mix of "== None" and "is None". This patch changes all
cases to the latter.
Use g_test_skip() so that the TAP output is correct for the tests,
rather than printing using g_printerr().
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/640
Use either g_get_real_time() or g_date_time_new_now_local(). This means
we don’t need to worry about time_t being 32b in future (the year 2038
problem), and it makes the need for error handling a bit more explicit.
Improve the error handling in several cases.
Based on a patch by Niels De Graef
(https://gitlab.gnome.org/GNOME/glib/merge_requests/142).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1402
Apparently this is needed for building PE libraries. It makes no
difference on Linux, where linking of the GLib symbols in the inotify
file monitor code is done lazily.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1201
The tests array was being wiped out by an assignment instead of an
append. This adds another 19 tests to what’s typically being run
already.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This was missed in !137 because some of the GIO tests weren’t being run
under Meson (see following commits).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Adds tests to cover this case and similar cases for various GResource
methods in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/927
When changing the locale using setlocale(), duplicate the old locale
value before updating it, so that we can safely restore the old locale
after running the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The flush data structures were not zero-initialised, which meant the
branch in flush_buffer_thread() was based on an uninitialised condition.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
For the purposes of debugging, it is quite useful for every GSource to
have a name set. Ensure that any GSource we construct inside GLib has a
name set. For GSources which are then returned to the caller, this name
can then be overridden with something even more useful by the caller.
Since this data is only used for debugging, avoid doing any allocations
for it; just use static strings.
https://gitlab.gnome.org/GNOME/glib/issues/1175
This reverts commit 03c324c64a and fixes
the original problem with e004d5f397 that
caused the revert.
We use $(builddir) instead of $(abs_builddir) so that Automake's
dependency generation works correctly.
See !127.
Add an app-launching function which allows standard file descriptors
to be passed to the child process.
This will be used by gnome-shell to pass systemd journal descriptors
as stdout/stderr. gnome-shell's child_setup function can then be
eliminated, which will enable use of the posix_spawn optimized
gspawn codepath for desktop app launching.
In order to use the new posix_spawn gspawn codepath, for more robust
app launching when available memory is low, we need to meet some
conditions.
child_setup needs to be NULL for this optimization to work, so drop
the internal child_setup that is used here. Replace it with a lightweight
wrapper binary (gio-launch-desktop) that sets GIO_LAUNCHED_DESKTOP_FILE_PID
before executing the app.
Adjust PATH for gio tests so that it can execute the new binary from the
build directory.
They’re network file systems, but not system file systems (in the sense
that procfs is a system file system). This fixes them disappearing from
the sidebar in the UI.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1424
Add a new syntax to override files: if the group name has a ':' in it,
it indicates that we want to override the default values of keys for
only one desktop. For example:
[org.gnome.desktop.interface:Unity]
font-name='Ubuntu 12'
Will override the settings, only if "Unity" is found in
XDG_CURRENT_DESKTOP. Multiple per-desktop overrides can be specified
for a given key: the one which comes first in XDG_CURRENT_DESKTOP will
be used.
https://bugzilla.gnome.org/show_bug.cgi?id=746592
Recognise a new 'd' option in schema keys which gives a dictionary of
per-desktop default values. This dictionary is searched for the items
found in XDG_CURRENT_DESKTOP, in the order. If nothing matches (or if
the option is missing) then the default value is used as before.
This feature was requested by Alberts Muktupāvels and this patch is
based on an approach devised by them.
https://bugzilla.gnome.org/show_bug.cgi?id=746592
There are a couple of different ways (and soon one more) to access the
default value of a key. Clean up the various places that access this to
avoid duplication.
https://bugzilla.gnome.org/show_bug.cgi?id=746592
There were previously no tests for it. These take gmountoperation.c up
to 85.5% coverage of lines.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1423
check_expected_events is heavily modified in this commit to tolerate
event loss and allow renaming to be reported as creation and deletion.
This fixes test failure on FreeBSD.
Previously, kqueue file monitor only add event sources for directories
regardless of the type of the file being monitored. Doing so may be
possible on inotify, but it is not sufficient on kqueue. Watching a
directory on kqueue doesn't report changes made to files under it, and
we must watch files themselves to get notified. This problem is fixed
by adding a second watch for non-directory file monitors, and the result
is that we are now able to receive 'CHANGED' and 'ATTRIBUTE_CHANGED'
events for non-directory files.
Since having two watches on one file monitor requires many code changes
to work properly, this commit also changes the following things:
- NOTE_ALL macro is now replaced by note_all inline function. Since the
kqueue backend is shared by all BSD operating systems, there are a
few difference between these systems. It is easier to do '#ifdef'
check in a function than in a macro.
- Both g_kqueue_file_monitor_callback and g_kqueue_file_monitor_cancel
now holds a lock before accessing kqueue_sub structs. This fixes a
crash when these two functions are called from different threads,
causing g_kqueue_file_monitor_callback to access freed memory.
- 'mask' variable in g_kqueue_file_monitor_callback is now removed.
The usage of 'mask' was wrong because of the 'mask > 0' check.
'CHANGED' event has value 0 so the 'mask > 0' check made it
impossible to emit 'CHANGED' events.
- kqueue-missing scans can now be triggered from the kqueue event
callback instead of always waiting for 4 seconds.
- Don't remove a file from kqueue on unlink unless its hard link count
has dropped to zero.
- Don't use 'else if' in the check of 'fflags'. It is possible for a
kevent to have multiple flags set.
- Don't use g_file_monitor_emit_event directly. Always use
g_file_monitor_source_handle_event to report events.
Events submitted to g_file_monitor_emit_event are delivered
immediately, but events sent to g_file_monitor_source_handle_event
are scheduled by GLocalFileMonitor. If we mix the two, the order of
events will be wrong and tests will fail.
- Report 'CHANGES_DONE_HINT' immediately after 'CREATED' if the file
created is not a regular file. This is copied from ih_event_callback.
GVfs utils used to have bash completion, which was pretty useful. However,
it hasn't been ported to gio tool unfortunately. GLib provides completion
for various utils already, so it would be nice to provide completion also
for gio tool. I've updated old bash completion code and merged with some
my old unmerged fixes.
The gvfs completion used "gvfs-ls --show-completions" helper. This mentioned
option hasn't been obviously ported to "gio list" and the proposed completion
doesn't add this option in "gio list" to not pollute the codes, but maybe it
is a bit slower as consequence.
The proposed bash completion suggests subcommands, uris and paths including
the remote mounts. It contains some workarounds, especially because of proper
handling of paths with colons and other special chars (like spaces)...
Since it’s deprecated in favour of positional arguments, including it in
the help output is confusing.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
These generate basic .c and .h files containing the GDBusInterfaceInfo
for a D-Bus introspection XML file, but no other code (no skeletons,
proxies, GObjects, etc.).
This is useful for projects who want to describe their D-Bus interfaces
using introspection XML, but who wish to implement the interfaces
manually (for various reasons, typically because the skeletons generated
by gdbus-codegen are too simplistic and limiting). Previously, these
projects would have had to write the GDBusInterfaceInfo manually, which
is painstaking and error-prone.
The new --interface-info-[body|header] options are very similar to
--[body|header], but mutually exclusive with them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
Recursive annotations do seem to be supported, so we should support them
properly in the type system representation. This currently introduces no
behavioural changes, but will be used in upcoming commits.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
This is to avoid race between dispose() being called on the
GFdoNotificationBackend instance, and any pending operations which are
still waiting on a D-Bus reply when it’s disposed.
(thx to Philip Withnall for pointing that out)
Signed-off-by: Arnaud Rebillout <elboulangero@gmail.com>
The basic test for duplicate icon names was not working fine when taking
into account fallbacks and icon style mix. This fixes it.
Also resolve the few review comments, i.e.: comment explaining
g_themed_icon_update_names() and the priority order applied to icons;
and using guint for 'i'.
Previously, calling:
g_dbus_is_supported_address ("some-imaginary-transport:", NULL)
correctly returned FALSE; but calling:
g_dbus_is_supported_address ("some-imaginary-transport:", &error)
crashed with:
GLib-GIO:ERROR:../gio/gdbusaddress.c:434:g_dbus_is_supported_address:
assertion failed: (ret || (!ret && (error == NULL || *error != NULL)))
This was because, if the address component did not start with a known
transport, no error was set. Fix this, reusing an error string used by
the corresponding else branch in g_dbus_address_connect(), and adjust
the test to pass both NULL and non-NULL GError **s to this function in
every test case. This case:
g_assert (!g_dbus_is_supported_address ("some-imaginary-transport:foo=bar;unix:path=/this/is/valid", NULL));
would have caught this bug with a non-NULL GError **.
The way things were before: a FreedesktopNotification struct is
allocated before the dbus call, and this same struct is possibly re-used
for other dbus calls. If the server becomes unavailable, the callback
will be invoked after the call times out, which leaves a long time where
other dbus calls can happen, re-using the same FreedesktopNotification
as user data. When the first call times out, the callback is invoked,
and the user data is freed. Subsequent calls that used the same user
data will time out later on, and try to free a pointer that was already
freed, hence segfaults.
This bug can be reproduced in Cinnamon 3.6.7, as mentioned in:
<https://github.com/linuxmint/Cinnamon/issues/7491>
This commit fixes that by always allocating a new
FreedesktopNotification before invoking dbus_call(), ensuring that the
callback always have a valid user data.
Signed-off-by: Arnaud Rebillout <elboulangero@gmail.com>
Use a GOnce to make sure we only warn about notifications not being
supported on Windows once, rather than on each attempted notification.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: https://gitlab.gnome.org/GNOME/glib/issues/1234
On an Android build, API 22, at least, I got a:
> warning: "UNIX_PATH_MAX" redefined
We were currently defining it as:
> #define UNIX_PATH_MAX sizeof (((struct sockaddr_un *) 0)->sun_path)
Whereas Android's headers define this variable of sockaddr_un as:
> char sun_path[UNIX_PATH_MAX];
So by definition, we will still get the right result in the end by just
using the original value of UNIX_PATH_MAX.
C_IN macro was added years ago in bcbaf1bef0, using same value as the
internal code of Android with the reasonning that "some parts of the API
used by the resolver objects is not public in the Android NDK (yet)".
Well since then things are changed, since it is definitely available (at
least on the API 22 of Android which I am using) in the public header
arpa/nameser_compat.h.
Let's just add a #ifndef to handle both cases when you build with an
older or recent API.
Meson has the ability to classify tests according to "suites", a list of
tags. This is especially useful when we want to run specific sets of
tests — e.g. only GLib's tests — instead of the whole test suite. It
also allows us to classify special tests, like "slow" ones, so that we
can only run them when needed.
FIONREAD ioctl on Linux reports the size of payload on UDP sockets.
However, other systems usually add internal header size to the reported
size, which vary between different operating systems and socket types.
To make it work on more systems, we should follow what we do on Windows
instead of using this unreliable FIONREAD ioctl.
This fixes socket test on FreeBSD.
libelf, just like libc, is not a single project. It is an interface
which can be implemented independently by different operating systems.
Therefore, we cannot expect all systems to provide a .pc file, and we
should fallback to cc.find_library and cc.has_function like what we
already do in autotools build.
Non-glibc gettext implementation seems to decide the language from
LC_MESSAGES environment variable instead of LC_MESSAGES locale, so
we should set both environment variable and locale when running tests
which need translation from specific languages.
G_IO_ERROR_NOT_SUPPORTED is used as parameter for g_set_io_error(),
however, errno is expected instead and thus error code is set to 0,
which is wrong. Let's use ENOTSUP instead.
To be honest, I am not sure why, but in some special environments (e.g.
our CI integration) can happen, that file device number is different from
parent device number. Return "Unable to find or create trash directory for
%s" error from g_local_file_trash() in that case and also set
G_FILE_ATTRIBUTE_ACCESS_CAN_TRASH appropriately.
Make the --help output more consistent with the man page, making it more
obvious that --sourcedir only applies to the files referenced in FILE,
not to the location of FILE itself.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1406
Change G_FILE_ATTRIBUTE_ACCESS_CAN_TRASH logic to be consistent
with recent g_local_file_trash changes, i.e. set this to FALSE for
locations on system-internal mounts.
https://gitlab.gnome.org/GNOME/glib/issues/251
New bugs appears periodically in nautilus/gvfs/glib components that not
all trashed files are shown in trash:///. It used to be problem mostly
for "bind mounts" and btrfs subvolumes only. Currently, it is also
problem for nfs, cifs and other filesystems, which have been recently
added by commmit 0d69462f on the list of system internal filesystems.
This happens because the trash backend doesn't monitor files on system
internal mounts. Such behavior is not against the trash-spec, however,
we should be consistent within GNOME.
This behavior has the nice side-effect that it solves issues with hangs
on network filesystems: https://gitlab.gnome.org/GNOME/glib/issues/605,
because those are currently on the system internal filesystem list.
https://gitlab.gnome.org/GNOME/glib/issues/251
Main changes were:
- take into account that style variants are added to the list of icon
names.
- In the test of icons set with 3 names ("first", "testicon" and
"last"), I also changed "first" to "first-symbolic" so that we can
test in such a case that the variant is the regular icon (only for
this name, out of the 3).
- Finally icon hashes are necessarily changed, and since emblems are
sorted by their hash in emblem icons, I had to invert an order which
was now different in one of the tests.
... a theme icon.
Otherwise fallbacks of the added icon name are not added to the list (if
use-default-fallbacks is set), nor is the regular/symbolic variant. Also
if we do not recreate the finale list from scratch, sorting of icons and
their variants may end up wrong.
To this end, let's keep around the icon names used for initialization,
separate from the finale name list.
When a themed icon is constructed with several input icon names, add the
variants (symbolic as well as level fallbacks) for every icon names, not
only the first one.
The search order is: first icon name, then its level fallbacks, then
second icon name, then its level fallbacks, then all style variants
(symbolic or regular, opposite to requested style) keeping the same
order again.
This fixes the contenttype GIO unit test.
Whatever the preferred icon style is (symbolic, regular or the requested
style), fallbacking to the other style in case of absent variant is
better than not finding any icon at all.
Also style fallbacking should be managed separately from property
"use-default-fallbacks". Default fallbacks are meant for the process of
getting up in context levels (as separated by dashes in icon name). Even
though it also uses dash characters in format, this is a different
concept as the variant of styles.
Without this commit for instance, if an icon only had a symbolic
variant, and the theme had "-gtk-icon-style" set to "regular" while your
GTK+ application requested the regular icon name, you were getting no
icons, and the application would look completely broken.
Now one would at least fallback to the symbolic icon as last resort
(which is infinitely better than having no icons).
Autoconf macro AC_HEADER_MAJOR doesn't define a macro in config.h when
major is defined in sys/types.h. This was not a problem because major
is assumed to be always available. However, commit aefffa3fbc
changes this assumption in order to fix build on systems without major,
which causes code using major to be disabled on systems putting major
in sys/types.h.
This commit defines a new macro MAJOR_IN_TYPES for both autotools and
meson builds to make major useful on these systems again.
gio-querymodules-wrapper.py is copied from glib-networking. This python
wrapper script is needed because meson.build cannot check for DESTDIR
env variable itself, unlike Makefile.am. It is used to update
giomodule.cache file when installing GIO modules like fam.
The previously implementation considered a file to be a mountpoint if
its parent is on a different device. / is its own parent, so by this
definition it is not a mountpoint.
But / is (generally) listed in fstab, and fstab(5) defines the
directories it contains to be mountpoints. This attribute should follow
that definition (and reasonable expectation): the root directory is a
mountpoint.
So, add a special-case for the case where the file's parent has the same
st_dev and st_ino as the file, which is true only at the root.
Test this attribute at / (only on POSIX), /proc (but only on Linux), and
at many files and directories created by the test suite (which cannot be
mountpoints).
Sometimes file monitor events may be slow to emit. Using g_idle_add
makes it less possible for events to be scheduled later than the main
loop quit, preventing test failure caused by missing events.
This fixes test failure on FreeBSD.
The check in _ke_is_excluded, which causes GKqueueFileMonitor to
fallback to GPollFileMonitor when it returns TRUE, was made to prevent
file monitor from blocking unmount of removable drives on systems not
supporting O_EVTONLY flag in open. However, since g_mount_can_unmount
always returns TRUE on Unix-like platforms, the check always returns
TRUE on non-standard mount points, which is very likely to cause all
programs on the desktop to use the polling fallback if GNOME is
installed in a different prefix for development. This makes the desktop
sluggish and results in bad developer experience on *BSD.
Kqueue isn't good at detecting rapid file creation and deletion. It
tends to miss events because events returned by the kernel don't include
filename information. Since the size of struct kevent is fixed, it is
probably not possible to extend the API to include file names without
breaking ABI. Therefore, we disables the test here to avoid test failure
that is impossible to fix in a reliable way.
The test 'file' uses non-standard '--bytes' option when running du,
which may cause error on non-GNU systems. To keep the test working,
we skips the du check as if we don't find a du command when du fails.
-export-dynamic is a libtool flag. It is also supported by GCC as an
undocumented flag, but it is not supported by Clang. Since we don't use
libtool in meson, we should use -Wl,--export-dynamic instead.
In master, it is already possible to build GLib using Visual Studio
using Meson[1] for some time, so we should focus on maintaining only the
Meson build files for building GLib with Visual Studio.
[1]: There are caveats when building with Visual Studio 2008, namely
that one needs to use the mt command to embed the manifests that
are generated with the .exe/DLLs, for all builds, and that in the
case where the compilation hangs on Visual Studio 2008 x64, as a
workaround, should stop the build by terminating all cl.exe tasks
and change the compiler optimization flag from /O2 (full speed) to
/O1 (optimize for size), due to compiler optimization issues.
Change G_FILE_ATTRIBUTE_ACCESS_CAN_TRASH logic to be consistent
with recent g_local_file_trash changes, i.e. set this to FALSE for
locations on system-internal mounts.
https://gitlab.gnome.org/GNOME/glib/issues/251
New bugs appears periodically in nautilus/gvfs/glib components that not
all trashed files are shown in trash:///. It used to be problem mostly
for "bind mounts" and btrfs subvolumes only. Currently, it is also
problem for nfs, cifs and other filesystems, which have been recently
added by commmit 0d69462f on the list of system internal filesystems.
This happens because the trash backend doesn't monitor files on system
internal mounts. Such behavior is not against the trash-spec, however,
we should be consistent within GNOME.
This behavior has the nice side-effect that it solves issues with hangs
on network filesystems: https://gitlab.gnome.org/GNOME/glib/issues/605,
because those are currently on the system internal filesystem list.
https://gitlab.gnome.org/GNOME/glib/issues/251
This test assumes the subprocess does not print anything else on stdout
other than the dbus address, otherwise g_test_trap_assert_stdout()
fails to match. But if the env running tests has G_MESSAGES_DEBUG=all
then it will also print "PATH=%s".
It's a synonym of G_VOLUME_IDENTIFIER_KIND_UNIX_DEVICE.
It doesn't change anything except not feeling dirty from using a wrongly
prefixed constant for the object type.
See: #182
Help is usually printed from tools if no arguments are given and there
is not default action. However "gio mount" and "gio trash" just silently
return. Let's print "No locations given" error and show help consistently.
"gio help COMMAND" shows some arguments with "..." and some with "…",
which looks weird, e.g.:
$ gio help mount
gio mount [OPTION…] [LOCATION...]
Let's use "…" consitently.
- Compiler checks were failing because it were using C compiler to build
objc code.
- xdgmime is needed on osx too.
- -DGIO_COMPILATION must be passed to objc compiler too.
- gapplication doesn't build on osx, it is excluded in autotools too.
We have to be careful when we use add_project_link_arguments(): All
targets are built using link arguments for the C language, except for
libgio on osx which use the objc language, because it contains some ".m"
source files. See https://github.com/mesonbuild/meson/issues/3585.
https://bugzilla.gnome.org/show_bug.cgi?id=796214
Those files got renamed to .c to work around an automake issue, but
Meson needs them to have .m extension. Better rename them at build time
in Makefile.am since that's where the workaround is needed.
https://bugzilla.gnome.org/show_bug.cgi?id=672777
Fixes this build error on macOS when inside an ssh terminal:
Traceback (most recent call last):
File "[...]/gio/tests/gengiotypefuncs.py", line 23, in <module>
for line in f:
File "[...]/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 2625: ordinal not in range(128)
https://bugzilla.gnome.org/show_bug.cgi?id=796328
GVfsUDisks2VolumeMonitor handles x-gvfs-hide/x-gvfs-show mount options
used to overwrite our heuristics whether the mount should be shown, or
hidden. Unfortunately, it works currently only for mounts with
corresponding fstab entries, because the options are read over
g_unix_mount_point_get_options. Let's introduce g_unix_mount_get_options
to allow reading of the options for all sort of mounts (e.g. created
over pam_mount, or manually mounted).
(Minor fixes to the documentation by Philip Withnall
<withnall@endlessm.com>.)
https://bugzilla.gnome.org/show_bug.cgi?id=668132
On non-glibc platforms gettext is provided by extra libintl dependency.
We wrongly thought libintl is an internal dependency and applications
needs to explicitly link on it, but turns out that breaks many
applications and with autotools the .pc generated actually has -lintl in
public "Libs:".
https://bugzilla.gnome.org/show_bug.cgi?id=796085
-z nodelete breaks the libresourceplugin module usage in the resources.c
test, which expects to be able to unload it.
Make the Meson build match what the autotools build does: only pass
glib_link_flags to the headline libraries (glib-2.0, gio-2.0,
gobject-2.0, gthread-2.0, gmodule-2.0) and omit it from all other build
targets.
https://bugzilla.gnome.org/show_bug.cgi?id=788771
gioenumtypes needs to be generated:
In file included from ../../../../external/glib/gio/kqueue/gkqueuefilemonitor.c:37:
In file included from ../../../../external/./glib/gio/glocalfilemonitor.h:25:
In file included from ../../../../external/./glib/gio/gunixmounts.h:24:
../../../../external/./glib/gio/gio.h:86:10: fatal error: 'gio/gioenumtypes.h' file not found
#include <gio/gioenumtypes.h>
^~~~~~~~~~~~~~~~~~~~
https://bugzilla.gnome.org/show_bug.cgi?id=794325
It inserted the new items one position after the given one and inserted all new items
at the same position resulting in the items being in the reverse order of the
input array.
It was decided to make these behavioural changes because this function has according to
https://codesearch.debian.net/search?q=g_list_store_splice only one real user (nautilus)
and it didn't do what one would expect from reading the documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=795307
All those logging functions already add a newline to any message they
print, so there’s no need to add a trailing newline in the message
passed to them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
The monitor_path comes from g_file_get_path(), so should be freed with
g_free() rather than free(). This makes no difference because they are
the same function in practice, but using free() is a bit confusing.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
This continues one of the const-correctness fixes from the previous
commit (it needed some more transitive fixes), and reverts another of
them, since it was over-zealous.
This fixes CI failure: https://gitlab.gnome.org/GNOME/glib/-/jobs/27125.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Spotted when temporarily compiling with -Wwrite-strings. This only goes
a small way towards making the code base -Wwrite-strings–clean. It
introduces no functional changes, and fixes no bugs.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
This fix undefined symbol link error when building for non-glibc
platform. Applications must link on libintl, it is not a public
dependency of libglib.
On glibc platforms libintl is a not found dependency and is just ignored
by meson, so it doesn't hurt to always have it.
https://bugzilla.gnome.org/show_bug.cgi?id=795406
Fix various warnings regarding unused variables, duplicated
branches etc by adjusting the ifdeffery and some missing casts.
gnulib triggers -Wduplicated-branches in one of the copied files,
disable as that just makes updating the code harder.
The warning indicating missing features are made none fatal through
pragmas. They still show but don't abort the build.
https://bugzilla.gnome.org/show_bug.cgi?id=793729
Make it a bit more obvious that the changed properties are provided as
an a{sv}.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
g_desktop_app_info_load_from_keyfile() refuses to load .desktop files
where the executable doesn't exist. Therefore whether or not the .desktop
file added in commit 148995544 is actually considered during tests depends
on /usr/bin/flatpak being installed. This isn't a safe assumption to make,
so use /bin/sh to test filtering of "prefix" commands.
https://bugzilla.gnome.org/show_bug.cgi?id=795488
The executable name can be a useful bit of information to match on in
searches where it differs from the name (for example because the latter
is localised), but will produce surprising results where the real appli-
cation is executed by a shared binary (for example interpretors like
gjs or python, or sandboxes like flatpak).
Address this by adding a blacklist of binary names that are ignored
in search.
https://bugzilla.gnome.org/show_bug.cgi?id=795488
Removing the event and closing the related file descriptor must be
done first to make sure the kqueue subsystem delete pending events.
The timeout must be disarmed before freeing the directory dependency
list otherwise it might populate it again.
https://bugzilla.gnome.org/show_bug.cgi?id=795193
This makes it a bit easier for debugging which files were generated from
which introspection XML.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=650875
Add a test for monitoring an existing local file, with the
WATCH_HARD_LINKS flag specified. This would previously cause a crash;
now it doesn’t.
This test contains a FIXME where I suspect we should be getting some
additional file change notifications from changes made through the hard
link; this requires further follow up and probably further fixes to our
inotify backend.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=755721
This gets the G_FILE_MONITOR_WATCH_HARD_LINKS flag to the state where it
doesn’t cause crashes, and essentially acts as a no-op. It will not yet
actually monitor for changes made via hard links.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=755721
The call to _start() fills in the dirname, basename, and filename
arguments according to the following rules:
dir watches: dirname filled
file watches: dirname and basename filled
hardlink: filename filled
This doesn't map to how the current inotify backend works very nicely,
so we need to adjust things a bit when creating our "sub" objects.
https://bugzilla.gnome.org/show_bug.cgi?id=755721
This test will only work on machines which have IPv6 enabled and have a
local IPv6 interface with ID 1. On machines which don’t (such as AWS
servers, which we run CI tests on), the GResolver tests will fail with
G_RESOLVER_ERROR_INVALID. We can’t differentiate this kind of failure
(where we’d want to skip the test) from an actual failure (where we’d
want to fail the test), so the only other option is to drop this
particular test vector. I don’t think it’s a significant loss.
This is the last fix needed to get our CI tests working reliably on
jenkins.gnome.org.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795234
There are various reasons why setting up a server might fail; it
reliably fails on AWS with IPv6 addresses (are we binding to the right
address?). Since we’re trying to test GSocket as a client, skip tests
where that happens.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795234
While 333 runs is very likely to reproduce the bug, Milan has previously
reproduced it with as few as 9 runs. Since this test will be run by the
CI machinery quite often, a lower number of runs each CI run will still
probably catch any regressions over time.
This reduces the total test runtime from 33s to 2s.
https://bugzilla.gnome.org/show_bug.cgi?id=793727
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
When using g_network_monitor_get_default() from another thread, it’s
possible for network-changed events to be processed after an instance of
GNetworkMonitor has been disposed, causing use-after-free problems.
Fix that by moving some of the initialisation into the GInitable.init()
chain, rather than in a main context idle callback.
This includes a unit test which probabilistically reproduces the bug
(but can’t do so deterministically due to it being a race condition).
Commit amended by Philip Withnall <withnall@endlessm.com> before
pushing.
https://bugzilla.gnome.org/show_bug.cgi?id=793727
Spotted while running valgrind on gsettings-test, as per the previous
commit.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
When using g_settings_bind(), if a range binding triggers a range check
failure, g_settings_binding_property_changed() will return early, but it
won't cleanup properly causing some leaks. The binding will also still
be marked as 'running', which causes an assertion failure when trying to
free it:
"g_settings_binding_free: assertion failed: (!binding->running)"
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=794805
There's a race condition somewhere in GTestDBus that can result in
the next test being started at a time when g_bus_get() would still
return the connection that is in the process of closing. This can
be reproduced reasonably reliably by running the gapplication test
10K times in a loop.
Instead of relying on waiting for the weak reference to be released,
we can force the issue by clearing it.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768996
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=894677
This adds a null notification backend implementation for win32, purely
to avoid crashes due to a missing backend when applications use
GNotification. This backend does nothing except print a warning when a
notification is supposed to be emitted.
In future, it can be expanded to use win32 API to present toaster
notifications appropriately.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776583
If glib-networking is installed and built with libproxy support, this
test will use it. If a proxy is set in the environment, we might get
correctly told to go through it for certain accesses. However, this isn't
going to work, because the testsuite monkeys with the network monitor to
tell it that all addresses - including the proxy - aren't reachable.
We're trying to check if adding networks to a GNetworkMonitor works in
general. Proxies just get in the way here, so let's use the built in
dummy proxy resolver which just tells us that all URLs are directly
accessible.
https://bugzilla.gnome.org/show_bug.cgi?id=794801
Explain why we say "See new_stateful()" (although it's pretty obvious).
Drop a redundant copy of the argument description in the body text.
Add a # to the GVariant type name so that we can have a nice link.
https://bugzilla.gnome.org/show_bug.cgi?id=795070
If something is nullable, it's always helpful to identify what NULL
means. Also, this is not the parameter for the .activate() vfunc, as we
take that over: rather, it is the parameter for the ::activate signal.
https://bugzilla.gnome.org/show_bug.cgi?id=795070
The `mount_monitor` variable is only set if the boolean
`with_mount_monitor` variable is set to TRUE, but the compiler does not
know that, so it'll warn when calling `g_clear_object()` even if the
clearing operation is gated with the same boolean.
Initializing with NULL does not cost us anything, and eliminates a
conditional branch.
https://bugzilla.gnome.org/show_bug.cgi?id=794732
The g_auto macros are available only with GCC-compatible compilers on
Unix, but having __attribute__((cleanup)) is not part of our toolchain
requirements, so we shouldn't use it — even if we are building on
Unix-compatible systems.
https://bugzilla.gnome.org/show_bug.cgi?id=794732
Some very odd systems have the functions to initialise and destroy a
struct __res_state, but apparently not to do a DNS query using it. Fix
the compilation on those systems.
https://bugzilla.gnome.org/show_bug.cgi?id=794606
GSocketListener can keep internal references to itself for pending
accept() calls, which mean that it can stay alive (and keep listening
on ports) even after a user drops their last reference to it. They need
to call g_socket_listener_close() explicitly to avoid that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=794207
There's no need to unconditionally print an error message if xmllint or
json-glib-format are not found when running glib-compile-resources is
called; we only need to warn if they are not available when we need
them. To avoid spamming the build logs, we can also warn once.
https://bugzilla.gnome.org/show_bug.cgi?id=794285
The glib-compile-resources tool has hand-rolled "open a temporary file"
code paths. Since error handling is hard, let's rely on GLib API that is
meant to do that consistently for us.
Get rid of some tabs mixed with spaces while we're at it.
https://bugzilla.gnome.org/show_bug.cgi?id=794284
Similarly to how glib-compile-resources can call xmllint to eliminate
whitespace in XML files to reduce their size inside a GResource, we can
use json-glib-format to achieve the same result.
The mechanism for using json-glib-format is the same, with a separate
environment variable if we want to direct glib-compile-resources to a
version of json-glib-format that is not the one in the PATH.
https://bugzilla.gnome.org/show_bug.cgi?id=794284
Normally, the list of mounts is filtered to exclude mounts in
/run/media/$username where $username is not the current user. However,
root can access all the mounts under /run/media/, regardless of the
username — so there’s no point in filtering out those mounts.
In some cases, filtering them out is harmful. In the case of a system
service which uses GVolumeMonitor, for example, filtering them out means
the service cannot see automounted USB sticks belonging to user
sessions.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793994
Tighten up the validation of application IDs so they are always exactly
D-Bus well-known names. This is a slight change to the accepted format,
but since anyone using the API with an application ID which was
previously valid, but which was not a valid D-Bus well-known name, would
have received an error from D-Bus when their application tried to
register on the bus, I think this break is acceptable.
It will affect any applications which have application IDs which are not
valid D-Bus well-known names, and which use the G_APPLICATION_NON_UNIQUE
flag. From a quick search in Debian Codesearch, no C applications use
that flag.
Update the documentation to use the rules from the D-Bus specification,
including the latest advice discouraging use of hyphens:
https://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-names-bus
Update the tests:
• Add the examples from the documentation to validate them.
• Especially the venerable 7-zip.org example.
• Move a couple of tests from expected-failure to expected-success:
they are valid D-Bus well-known names even if they’re a bit weird.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793400
This will make the assertion failure messages a little more useful, and
prevent the assertions being compiled out with G_DISABLE_ASSERT.
Introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793400
- Stop using a custom thread for listening to kqueue(2) events. Instead
call kevent(2) in non blocking mode in a monitor callback. Under the
hood poll(2) is used to figure out if new events are available.
- Do not use a socketpair with a custom protocol requiring 2 supplementary
context switches per event to commicate between multiple threads. Calling
kevent(2), in non blocking mode, to add/remove events is fine from any
context.
- Add kqueue(2) events without the EV_ONESHOT flag. This removes a race
where some notifications were lost because events had to be re-added for
every new notification.
- Get rid of the global hash table and its associated lock and races. Use
the 'cookie' argument of kevent(2) to pass the associated descriptor when
registering an event.
- Fix _kh_file_appeared_cb() by properly passing a monitor instead of a
source to g_file_monitor_emit_event().
- Properly refcount sources.
- Remove a lot of abstraction making it harder to fix the remaining issues.
https://bugzilla.gnome.org/show_bug.cgi?id=739424
If the GNetworkMonitorNetlink is finalised part-way through a dump
(after request_dump() is called, but before finish_dump() is called),
dump_networks was leaked. Fix that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
This should introduce no functional changes. Factor out some common
code, flip some arguments around to use the more conventional (data,
length) order, and move some memory management calls out of
if-blocks.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
By using g_timeout_source_new_seconds(), we can let timer wakeups be
coalesced by the scheduler, and reduce power consumption a bit. This
shouldn’t really affect the accuracy of the network monitoring.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
Previously, the GSource would be attached to whatever GMainContext was
the thread default at the time; but that might no longer be the same as
the default at the time of constructing the GNetworkMonitor.
Save the default from construction time, so that source callbacks are
always invoked in the same GMainContext.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
In doing so, ensure that g_option_context_set_ignore_unknown_options()
is always called if completion is being done.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793597
In this situation:
$ gdbus emit --session --object-path /org/foo/bar --sig<tab><tab><tab>
We will currently insert --signal three times.
We should only do that once.
https://bugzilla.gnome.org/show_bug.cgi?id=793597
Commit faf9440908 made the bash completion more
robust, but in doing so it made the optional --dest argument to `gdbus emit'
mandatory by mistake.
Remove the error case when --dest is not specified. To keep the completion
working, we shuffle the cases around. --dest should be offered up for
completion after --session/--system/--address have been supplied, so we can
complete its argument. Additionally, if --dest isn't specified then we can't
complete --object-path or --signal, so guard these completions accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=793597
When completing, we parse the options that the user has typed so far. Up
until now we've been doing this without ignoring unknown options. This
leads to broken completions when the user has typed an incomplete
parameter.
For example, when doing the following:
$ gdbus emit --session --obj<tab>
We expect --object-path to be completed, but it is currently not. What
happens is that we fail to parse the options, therefore don't act on
--session and so don't connect to the session bus, then we early-exit
because we need to know which bus to operate on for later completions.
Instead we can ignore the half-completed --obj, parse --session, get
connected to the bus and then move on to the later completion code.
https://bugzilla.gnome.org/show_bug.cgi?id=793597
This change increases throughput when copying files for some filesystems
(Modified by Philip Withnall <withnall@endlessm.com> to add more error
handling.)
https://bugzilla.gnome.org/show_bug.cgi?id=791457
It incorrectly said that an error could only be returned if the GVariant
was incorrect for the D-Bus API, but that’s not true: an error will also
be returned if you call it on a closed GDBusConnection.
Clarify that, and mention the actual error codes which are returned.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
If calling g_subprocess_communicate() on a GSubprocess with no
stdout/stderr pipe, a critical warning would be emitted from
g_memory_output_stream_steal_as_bytes(), as it would be called on a NULL
output stream.
Fix that, improve the relevant GIR annotations, and expand the unit
tests to cover it (and various other combinations of flags).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793331
Building against libmount installed into a non-default prefix wasn’t
working, as we were using #include <libmount/libmount.h> rather than
the correct #include <libmount.h> — all the mount.pc pkg-config files
set `Cflags: -I${includedir}/libmount`.
Fixing this while retaining the fallback support for versions of
libmount without a pkg-config file would have been tricky (we would need
to work out a suitable -I flag to set in LIBMOUNT_CFLAGS) to still be
able to use the correct #include path). Thankfully, libmount gained
pkg-config support a long time ago, so I think we can safely drop the
fallback code. In particular, Debian Jessie, Ubuntu Trusty, and CentOS 5
all ship a mount.pc file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793288
If flush_async is deleted by a child class, then calling
g_output_stream_flush_async would leave the GOutputStream in an invalid
state. I'm not aware of any GOutputStream that would be affected by this
issue, but might as well fix it.
https://bugzilla.gnome.org/show_bug.cgi?id=738277
g_variant_get_objpathv() doesn’t exist. The code actually meant
g_variant_get_objv().
This fixes a leak with `ao`-type properties in generated code.
Previously they wouldn’t be freed; now the container is (correctly)
freed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=770335
res_query() uses global state in the form of the struct __res_state
which contains the contents of resolv.conf (and other things). On Linux,
this state seems to be thread-local, so there is no problem. On OS X,
however, it is not, and hence multiple res_query() calls from parallel
threads will compete and return bogus results.
The fix for this is to use res_nquery(), introduced in BIND 8.2, which
takes an explicit state argument. This allows us to manually store the
state thread-locally. If res_nquery() isn’t available, we fall back to
res_query(). It should be available on OS X though. As a data point,
it’s available on Fedora 27.
There’s a slight complication in the fact that OS X requires the state
to be freed using res_ndestroy() rather than res_nclose(). Linux uses
res_nclose().
(See, for example, the NetBSD man page:
https://www.unix.com/man-page/netbsd/3/res_ninit/. The Linux one is
incomplete and not so useful:
http://man7.org/linux/man-pages/man3/resolver.3.html.)
The new code will call res_ninit() once per res_nquery() task. This is
not optimal, but no worse than before — since res_query() was being
called in a worker thread, on Linux, it would implicitly initialise the
thread-local struct __res_state when it was called. We’ve essentially
just made that explicit. In practical terms, this means a
stat("/etc/resolv.conf") call per res_nquery() task.
In future, we could improve this by using an explicit thread pool with
some manually-created worker threads, each of which initialises a struct
__res_state on spawning, and only updates it on receiving
the #GResolver::reload signal.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792050
Some projects use child schemas in an odd way: they link children which
already have their path pre-defined. This causes the child schema (and
its keys) to be printed out twice:
- once because it is, itself, a non-relocatable schema
- once, as a recursion from its parent
We can avoid this by not recursing into child schemas that are
non-relocatable (on the assumption that they will be enumerated
elsewhere).
https://bugzilla.gnome.org/show_bug.cgi?id=723003
g_data_input_stream_read_upto() was introduced in 2.26; now it’s GLib
2.56, we can probably deprecate the old versions (since the handling of
consuming the stop character differs between the sync and async versions
of it).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=584284
Check for g_hostname_to_ascii() failure, rather than crashing when
checking whether an invalid hostname should go through the proxy.
The HTTP library should report the error about the invalid hostname
once we actually try to connect to it.
https://bugzilla.gnome.org/show_bug.cgi?id=772989
If the underlying transport is D/TLS the same data and data length
is required to be sent on the next iteration when a WOULD_BLOCK
happens. This is due to the fact that gnutls or openssl keep
an internal state for the data.
https://bugzilla.gnome.org/show_bug.cgi?id=792862
See the discussion in the bug report: with proxy support enabled, a
proxy resolver is created. Doing that will load all the GIO modules, and
typically at least one of them will try to use GDBus during
initialisation, which will cause a deadlock.
Using a TCP address with GDBusAddress is still supported, but accessing
it over a proxy is not.
Document this.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792499
In cases where gdbus-codegen is used only for docbook generation,
the execution stops with the following error message:
`Using --header or --body requires --output`
This is because it was assumed that, in addition to the docbook
generation, the header or source code were always generated.
This patch fixes this, and the header or source code generation
is not mandatory, so the docbook can be generated separately.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
Skip accumulated events from file monitor which we are not able to handle
in a real time instead of emitting mounts_changed signal several times.
This should behave equally to GIOChannel based monitoring. See Bug 792235.
https://bugzilla.gnome.org/show_bug.cgi?id=793006
This makes it more consistent with the other win32 objects in GIO. This
commit just renames the files; a follow-up commit will rename the
GObject.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=685442
Added a Windows backend to GNetworkMonitor, using NotifyRouteChange2()
(available on Vista and later). It marshals the route change callbacks
to the thread-specific default main context the GNetworkMonitor was
constructed in.
https://bugzilla.gnome.org/show_bug.cgi?id=685442
This is a variant of g_file_get_path() which returns a const string to
the caller, rather than transferring ownership.
I've been carrying `gs_file_get_path_cached()` in libgsystem and it
has seen a lot of use in the ostree and flatpak codebases. There are
probably others too.
I think language bindings like Python/Gjs could also use this to avoid
an extra malloc (i.e. we could transparently replace
`g_file_get_path()` with `g_file_peek_path()`.
(Originally by Colin Walters. Tweaked by Philip Withnall to update to
2.56, change the function name and drop the locking.)
https://bugzilla.gnome.org/show_bug.cgi?id=767976
gdbus-codegen's options only allow a simultaneous header and source
code generation.
A `--header` and `--body` options have been added along with the
`--output` option which allow separate C header and code
generation.
These options cannot be used in addition to the old options such
as `--generate-c-code`, `--generate-docbook` or
`--output-directory`.
These options have also been added to gdbus-codegen's documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The `outdir` and `docbook` parameters are passed to the
`DocbookCodeGenerator` constructor, but these parameters are only
used at docbook generation, which is optional.
The parameters have been removed from the class creation and added
to the `generate` method, where they are actually being used.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The class that generated both C header and code has been split into
two classes. These clases are now specialized on creating the header
or the body code.
All parameters that do not belong to each class have also been
deleted, so only the necessary parameters still remain. These also
includes the header and code file descriptors, leaving only the
corresponding file descriptor necessary for each class.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The generation of the C header and code preambles have been split
in order to be able to generate both files separately in the future.
The functions for generating preambles and postambles have also been
renamed following the function names used in the glib-genmarshal
rewrite, so that they stay consistent.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The #pragma once is widely supported preprocessor directive that can
be used instead of include guards.
This adds support for using optionally this directive instead of
include guards.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The optparse module is deprecated since version 2.7 and the
development continues with the argparse.
The code has been moved from optparse to argparse when parsing
command-line options. This has also led to the deprecation of the
`--xml-files`, and positional arguments should be used instead.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
`glib-genmarshal` and `glib-mkenums` use a `Color` class which
implements a number of print_* methods to print colored messages
to the standard error output.
In order to be consistent with those programs' output,
`gdbus-codegen` has also started using that same class and methods.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
gtk-doc doesn’t support them any more since it was ported to Markdown,
so they end up appearing in the generated documentation, which isn’t
great.
Mostly, they were used to split up things invisibly, which we can do in
other ways.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Try and make it a bit more obvious that g_file_query_exists() is
generally A Bad Idea.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
gtk-doc was mis-parsing the combination of ` and :: and truncating some
of the documentation. Avoid that by using the D-Bus style of separating
interface and signal names using a dot.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Because the argument being called "available" and the property being
called "network-available" is confusing.
Also remove the details of what that value means, as it's already
described in the property, and duplicating the explanation makes it look
like it might have a different meaning.
https://bugzilla.gnome.org/show_bug.cgi?id=792370
The g_dbus_connection_call() documentation doesn’t make it clear that
the reply type is always a tuple.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
The license string which is embedded in the C header and body
preambles has been moved to a global variable. This way it can be
reused in both sections.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
I originally planned to introduce a new property and functions to
replace these, with the same behavior but less-confusing names. But that
might not be the best approach in the long run. Instead, let's just
deprecate them without replacement.
TLS 1.2 intolerance is no longer a thing in the wild, and no known
GTlsBackend supports TLS 1.3 yet. But you might need to use this
property in the future, even though it's deprecated, if your
GTlsBackend has added support for TLS 1.3 and you need to talk to a
server that is TLS 1.3 intolerant.
Independently of all that, these APIs simply no longer do what their
names suggest, so deprecation is sensible regardless.
https://bugzilla.gnome.org/show_bug.cgi?id=792217
The property documentation correctly indicates how this code works
nowadays, but the function documentation is obsolete and misleading.
Update it.
https://bugzilla.gnome.org/show_bug.cgi?id=792217
Custom desktop file fields may be translated, but there is currently
no non-hacky way to look up the localized value; fill get gap with
a small wrapper around g_key_file_get_locale_string().
https://bugzilla.gnome.org/show_bug.cgi?id=779413
The source object for this asynchronous operation is the GXdpOpenURI,
not a GDBusConnection. This was causing crashes in method calls on the
connection, unsurprisingly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=791720
This was introduced in bug #742997, but not added to the Makefile.am, so
it’s missing from tarballs.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
https://bugzilla.gnome.org/show_bug.cgi?id=792322
Fix various strict aliasing problems caused by casting between (struct
sockaddr *) and (struct sockaddr_storage *): the correct code here is to
keep the two in a union.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=791622
Commit 281e3010 narrowed the race between GCancellable::cancelled and
GCancellableSource's finalize(), but did not prevent it: there was
nothing to stop cancellation from occurring after the refcount drops
to 0, but before g_source_unref_internal() bumps it back up to 1 to
run finalize().
GCancellable cannot be expected to detect that situation, because the
only way it has to detect last-unref is finalize(), but in that
situation finalize() hasn't happened yet.
Instead of detecting last-unref, relax the precondition a little
to make it detect finalization: priv is only poisoned (set to NULL)
after the finalize() function has been called, so we can assume that
GCancellable has already seen finalize() by then.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=791754
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884654
Properly define GLIB/GOBJECT_STATIC_COMPILATION when static build is enabled.
Use library() instead of shared_library() to allow selecting static builds.
https://bugzilla.gnome.org/show_bug.cgi?id=784995
GIO modules should include their name into their exported symbols to
make them unique. This avoids symbol clash when building modules
statically.
extract_name() function is copied from GStreamer which recently
switched to the same symbol naming scheme.
https://bugzilla.gnome.org/show_bug.cgi?id=684282
In order to enrich information displayed by GApplication command line
handling when --help is invoked, 3 new methods are proposed:
. g_application_set_option_context_parameter_string
. g_application_set_option_context_summary
. g_application_set_option_context_description
Those methods interact with the GApplication's internal GOptionContext
which is created for command line parsing in g_application_parse_command_line.
(please refer to the GOptionContext class for more information about option
context, parameter string, summary and description.)
To illustrate the 3 methods, an example is provided:
. gapplication-example-cmdline4.c
to suppress a compiler error with stricter warnings enabled (GCC):
gdbus-test-codegen.c: In function ‘on_handle_get_self’:
gdbus-test-codegen.c:403:26: error: format ‘%p’ expects argument of type
‘void *’, but argument 2 has type ‘GThread * {aka struct _GThread *}’
[-Werror=format=]
s = g_strdup_printf ("%p", g_thread_self ());
https://bugzilla.gnome.org/show_bug.cgi?id=792099
The GSocketListener::event signal has a type of GSocketListenerEvent,
which is an enum. However, the vfunc signature had a pointer, with
different sizing requirements. Given the alignment and prompostion
of some systems, you may still get the same call-site layout, but
that is not guaranteed.
This fixes the parameter to have the proper enumeration.
https://bugzilla.gnome.org/show_bug.cgi?id=791906
Add filesystem magic numbers found in statfs(2) manual page. Filesystem
magic numbers that are not available from the manual page are copied
from Linux source code.
configfs is found in fs/configfs/mount.c, macro CONFIGFS_MAGIC.
fusectl is found in fs/fuse/control.c, macro FUSE_CTL_SUPER_MAGIC.
rpc_pipefs is found in net/sunrpc/rpc_pipe.c, macro RPCAUTH_GSSMAGIC.
https://bugzilla.gnome.org/show_bug.cgi?id=754634
Previously, we waited an arbitrary 100ms or 200ms and then asserted
that the events had happened, but that might fail if the machine is
slow or heavily loaded.
We still wait for an arbitrary time for negative tests (asserting
that no more signals are received) because we don't have any way
to do better here.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884661https://bugzilla.gnome.org/show_bug.cgi?id=791744
In autotools this same check reads:
AS_IF([test $glib_native_android != yes]
with glib_native_android being defined as:
case $host in
*android*)
glib_native_android="yes"
;;
*)
glib_native_android="no"
;;
esac
This is needed to be able to compile on OSX.
https://bugzilla.gnome.org/show_bug.cgi?id=791460
Signed-off-by: Nirbheek Chauhan <nirbheek@centricular.com>
This patch considers generic icon names also when icon names
are searched based on content type. Without this fix only
non-generic icon names are found. This results in no icons
for pdf and jpeg files in the file selection dialog.
This is discussed in
https://bugzilla.gnome.org/show_bug.cgi?id=788936
New test to make sure we exercise the code paths in gdesktopappinfo.c
that get triggered when g_desktop_app_info_launch_uris_with_spawn()
is used (i.e. unknown app ID, no session bus), both for when either
a single URI or multiple ones are expected by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=791337
If an application calls g_app_info_launch_uris() with a GList that includes
NULL values in some of its data members, and GIO ends up internally calling
g_desktop_app_info_launch_uris_with_spawn() for whatever reason (e.g. no
D-Bus session available), expand_macro() will crash due to the invalid data.
As this is considered a programmer error, use g_return_val_if_fail() in those
situations to prevent the crash from happening, but printing a warning anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=791337
This list will be modified in-place when calling expand_macro(), so pass a copy
of it instead the original pointer, that is supposed to be an input parameter
only for g_desktop_app_info_launch_uris_with_spawn().
https://bugzilla.gnome.org/show_bug.cgi?id=791337
In MacOS the file selection dialog does not show folder icons.
With this fix the folder icons are shown. The bug is described
in:
https://bugzilla.gnome.org/show_bug.cgi?id=788936
This bug fix is only partial, because this fix is only the
last resort when no mime information is available.
The thumbnail attributes would previously only be set if thumbnail::path
was included in the query — so querying for just thumbnail::is-valid
would return no results.
This fixes the behaviour of
gio info -a thumbnail::is-valid ./some-file.png
vs
gio info -a thumbnail ./some-file.png
The first command would previously list nothing. The second would
previously list a thumbnail::path and thumbnail::is-valid.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=791325
Putting a <!-- --> in plural<!-- -->s was an old hack used to fix
linking the symbol with gtk-doc when gtk-doc didn’t know about plural
forms. gtk-doc does now know about plural forms, so the hack can be
removed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_variant_get_normal_form() doesn’t necessarily return a floating
GVariant, so we have to take, rather than sink, the ref.
This fixes a lot of leaks with gdbus-codegen-generated code.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=741167
When using gdbus-codegen to produce generated code for a method with
an out parameter with a signature like 'as', make sure to include
an "(array)" annotation for that parameter.
(Reworked by Philip Withnall to improve code formatting.)
https://bugzilla.gnome.org/show_bug.cgi?id=741167
Apparently Solaris defines statbuf fields as long when Linux doesn’t, in
some cases. Cast down to the type expected by the printf() format
placeholder.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749652
Two of the vfuncs in GMountOperation need some annotations for their
element types and array sizes, otherwise g-ir-scanner comes up with
nonsense output.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=773980
Bug #786580 triggered this warning to show up in the appinfo tests if
run on a machine where no terminal except xterm is installed (for
example, a build machine). Since we didn’t warn before if xterm but no
other terminals were installed, it seems reasonable to downgrade the
warning to a debug message.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790914
If we can’t convert the inotify event mask into a GFileMonitorEvent enum
value, don’t propagate it to GLocalFileMonitor, since it hits an
assertion failure in that case.
This should no longer be possible since the previous commit to ignore
IN_Q_OVERFLOW events, but we might as well change this just in case
other bugs crop up in event mask handling.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776147
There’s not much we can do about them, and if they go unhandled, they
can propagate through to g_file_monitor_source_handle_event() and cause
assertion failures due to not mapping to a GFileMonitorEvent.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776147
That event is deprecated, and the kqueue backend can’t provide enough
information to go alongside the event (i.e. the name of the new file).
Use G_FILE_MONITOR_EVENT_DELETED instead.
Quite disappointed in the kqueue documentation for this: I cannot find a
single piece of documentation or example about how NOTE_RENAME is
supposed to communicate the new name of the file.
If it turns out that this is possible, the code can be amended again in
future. At least now it doesn’t abort.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776147
While gio module extension is loaded a new GProxyResolverPortal is
created to query whether it's supported. We always return FALSE when not
aunder flatpak, so we don't need to connect to the session bus in that
case. Add a helper ensure_resolver_proxy() that returns TRUE when the
proxy is created and use it in is_supported() instead of creating the
proxy unconditionally in the instance initialization.
https://bugzilla.gnome.org/show_bug.cgi?id=790894
fstype is a const char*, and is passed to
g_file_info_set_attribute_string(), which takes a copy of it. There’s no
need to g_strdup() the FS type from various statfs/statvfs buffers
beforehand, given that the buffers are valid for the duration of this
function.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=679347
This adds g_file_load_bytes() to make it more convenient to
load the contents of a GFile as GBytes.
It includes a special casing for gresources to increase the
chances that the GBytes directly references the embedded data
instead of copying to the heap.
https://bugzilla.gnome.org/show_bug.cgi?id=790272
In the vast majority of cases, we can avoid temporary
allocations for paths in g_resources_enumerate_children().
In the case we need to add a suffix "/", we can usually just
build the path on the stack. In other cases, we can completely
avoid the strdup, which appears to only have been added for
readability. If the path is really long, we fallback to doing
what we did before, and use g_strconcat().
In the case of Builder, this saved 5.3mb of temporary
allocations in the process of showing the first application
window.
https://bugzilla.gnome.org/show_bug.cgi?id=790275
Previously, the path canonicalization for resources had liberal use of
strlen() and memmove() while walking through the path. This patch avoids
any secondary strlen() and removes all use of memmove().
A single allocation is created up front as we should only ever need one
additional byte more than then length of the incoming path string.
To keep the implementation readable, the mechanics are kept in external
functions. memrchr() was not used due to its lack of portability.
This is faster in every test case I've tested. Paths that contain
relative ../ have the most speedup.
https://bugzilla.gnome.org/show_bug.cgi?id=790310
The Python version was added for the Meson build, but we might as well
use it from autotools too, since it does exactly the same thing as the
Perl version (modulo not including a trailing linebreak, but that
doesn’t matter).
Works fine with Python 2.7 or Python 3.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790147
This will fix a few broken links in the documentation, and shut up a
load of gtk-doc warnings (but certainly not all of them).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790015
Uris may be altered by the following code, which breaks xdg-open:
file = g_file_new_for_commandline_arg (arg[i])
uri = g_file_get_uri (file);
Examples of possible uri changes:
mailto:email -> mailto:///email
magnet:?xt=urn:hash -> magnet:///?xt=urn:hash
ssh://user@host -> sftp://user@host
This patch causes that uris aren't preprocessed for locations with
scheme, however absolute and relative paths are still preprocessed.
https://bugzilla.gnome.org/show_bug.cgi?id=779182
create_cstr_from_cfstring_with_fallback() is allowed to be called when str == NULL
but create_cstr_from_cfstring() isn't which leads to warnings in the console.
Fix this by adding NULL checks into create_cstr_from_cfstring_with_fallback().
https://bugzilla.gnome.org/show_bug.cgi?id=788936
The patch basically just grabs the implementation of g_content_type_get_icon_internal()
from gcontenttype.c - the only difference is that it first converts UTI to MIME using
g_content_type_get_mime_type() and at the end frees this temporary MIME type.
https://bugzilla.gnome.org/show_bug.cgi?id=788936
This commit adds new W32-only functions to gstdio.c,
and a new header file, gstdioprivate.h.
These functions are:
g_win32_stat_utf8()
g_win32_lstat_utf8()
g_win32_fstat()
and they fill a private structure, GWin32PrivateStat,
which has all the fields that normal stat has, as well as some
extras.
These functions are then used throughout glib and gio to get better
data about the system. Specifically:
* Full, 64-bit size, guaranteed (g_stat() is forced to use 32-bit st_size)
* Full, 64-bit file identifier (st_ino is 0 when normal stat() is used, and still is)
* W32 File attributes (which stat() doesn't report); in particular, this allows
symlinks to be correctly identified
* Full, 64-bit time, guaranteed (g_stat() uses 32-bit st_*time on 32-bit Windows)
* Allocated file size (as a W32 replacement for the missing st_blocks)
st_mode remains unchanged (thus, no S_ISLNK), so when these are given back to
glib users (via g_stat(), for example, which is now implemented by calling g_win32_stat_utf8),
this field does not contain anything unexpected.
g_lstat() now calls g_win32_lstat_utf8(), which works on symlinks the way it's supposed to.
Also adds the g_win32_readlink_utf8() function, which behaves like readlink()
(including its inability to return 0-terminated strings and inability to say how large
the output buffer should be; these limitations are purely for compatibility with
existing glib code).
Thus, symlink support should now be much better, although far from being complete.
A new W32-only test in gio/tests/file.c highlights the following features:
* allocated size
* 64-bit time
* unique file IDs
https://bugzilla.gnome.org/show_bug.cgi?id=788180
The GAsyncResult documentation didn't specify the context in which the
GAsyncReadyCallback is expected to be invoked. Since asynchronous
operations can be implemented in various ways involving GSources,
threads and coroutines, it is useful to mention what the standard
expections are.
Unfortunately, since this was left undefined for so long, we can only
phrase it as a suggestion, and not as a hard requirement.
https://bugzilla.gnome.org/show_bug.cgi?id=783825
Where we were already treating GHashTables as sets, modify them to use
the set-specific APIs g_hash_table_add() and g_hash_table_contains(), to
make that usage more obvious and less prone to being broken.
Heavily based on patches by Garrett Regier <garrettregier@gmail.com>.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749371
This is needed by gnome-control-center and gnome-settings-daemon; it
makes existing checks from gunixmounts.c public.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788927
In my previous patch, I failed to call g_source_remove_unix_fd() in
order to actually stop polling the fd of the closed socket.
The test did not catch this, because the test only checks that the right
source callback is dispatched properly. I don't know how to test this.
https://bugzilla.gnome.org/show_bug.cgi?id=723655
Checks that after a GSocket is closed, a source created off it
with g_socket_create_source() will dispatch exactly once with
G_IO_NVAL.
Based on a patch by Mikhail Zabaluev
https://bugzilla.gnome.org/show_bug.cgi?id=723655
We're eventually going to drop Autotools, but in the meantime we should
probably use idiomatic options and reduce warnings.
GLib is pretty much already safe for subdir-objects to be enabled,
except in the GIO tests, where the build references files that are
generated in a different level. For that, we can use the same solution
employed by GTK+, and link the appropriate file in the right
sub-directory.
https://bugzilla.gnome.org/show_bug.cgi?id=788989
Ensure that the debug call won't crash if create_cstr_from_cfstring
returns NULL, fix the leak of that CFArrayRef, and make explicit the
failure condition of LSFindApplicationForInfo.
https://bugzilla.gnome.org/show_bug.cgi?id=788936
During testing with gdk-pixbuf I noticed failures during content type
to mime conversion. The root reason was the unsafe conversion used
in create_cstr_from_cfstring. The problem was addressed in commit
c60226e0a1 but that was reverted. I noticed the commit only
when I had fixed the problem. In addition I added a test to check
the content type to mime conversion on MacOS. This problem is
discussed in Bug #788936.
See: https://bugzilla.gnome.org/show_bug.cgi?id=788936
It adds support for source-specific multicast IGMPv3.
Allow receiving data only from a specified source when joining
a multicast group.
g_socket_join_multicast_group_ssm can be called multiple times
to allow receiving data from more than one source.
Support IPv4 and IPv6.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=740791
Closes: Bug #788401
The problem is described here:
https://bugzilla.gnome.org/show_bug.cgi?id=788401
This patch introduces the use of the xdgmime system to guess
the content type from data. So you can guess for example the
type public.svg-image from the file content of a svg file.
This patch only applies to MacOS. A test for the regression
is also included.
This reverts commit c60226e0a1.
Pushed without review. This should be reviewed on bug #788936 first.
Several issues with the patch:
• Takes the string length unnecessarily early.
• Calls CFRelease(str) before g_strdup(cstr) which could lead to
use-after-free.
• Code style issues.
• Don’t want to encourage pushing patches without review.
priv->map_object_path_to_object_proxy must be protected to avoid
concurrent access by multiple threads. Move the hash table insertion
into the critical section.
https://bugzilla.gnome.org/show_bug.cgi?id=788368
On slow ARM machines doing parallel builds, there's no guarantee that
we'll get scheduled in a window between (100ms|250ms) and 500ms.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=769674
On slow ARM machines doing parallel builds, there's no guarantee that
we'll get through this in 5 seconds.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=769674
"len" is only used by some platforms' implementations (as controlled
by various autoconf/#ifdef tokens) and only in a small codeblock in
those cases, but was declared based on a looser #ifdef heuristic and
in a larger scope. The result is an unused-variable warning when built
on some platforms. Move declaration to the local codeblocks that use
the variable, which also restricts it to the narrower set of platforms
where those codeblocks are used.
https://bugzilla.gnome.org/show_bug.cgi?id=689323
ssize_t is supported widely, but not universally, so use gssize instead.
Currently only one piece of code actually *needs* this change to be compilable
with MSVC, the rest are mostly in *nix parts of the code, but these are changed
too, for symmetry.
https://bugzilla.gnome.org/show_bug.cgi?id=788180
• `gdbus monitor` can’t work at all for non-message-bus connections,
since it can’t subscribe to signals.
• Other tab completions for names depend on the connection being a
message bus connection, but we still need to print `--dest` (etc.)
when tab completing them, even if we can’t print a list of
available names.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788594
This assumption breaks when, for instance:
* Called as /bin/gdbus-codegen
* Installed on Windows in a directory that is not `bin/`
For such cases, we cannot make any assumptions about the directory
structure, and must hard-code the datadir.
https://bugzilla.gnome.org/show_bug.cgi?id=786785
The return value from g_get_user_special_dir() might be NULL. Safest to
use g_strcmp0() uniformly everywhere.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=661442
If gio open exits before the program it starts fully activates, then
the dbus-daemon may avoid doing the activating method call.
This commit works around the problem by pinging the activated application,
and waiting for a reply.
Same workaround is used in gtk-launch and was used in gvfs-open before
it was replaced by gio open.
https://bugzilla.gnome.org/show_bug.cgi?id=780296
Commit 53ed180 improved mtab processing, however, also introduced bug
in code obtaining mount points. mtab was used by mistake also for
g_unix_mount_points_get implementation, which is obviously wrong and
fstab has to be used instead...
https://bugzilla.gnome.org/show_bug.cgi?id=781867
Fix get_mounts_timestamp() to not use a stat'ed mtime for /proc/ files.
Instead, use mount_poller_time if /proc/ watch is running, or otherwise
return a new generated timestamp to always assume mounts-changed, which
is safer than previous behaviour of always assuming mounts-not-changed
(as mtime never changes for /proc/ files when queried from the same
process).
We say it's safer because allows caches depending on:
g_unix_mounts_get(&time_read)
g_unix_mounts_changed_since()
to drop possibly outdated/duplicated values, as that was the case for the
GIO mounts cache used in gio/glocalfile.c which provides mount info for
g_file_query_filesystem_info() call, as described in below referenced bug.
This fix complements related commit bd9e266e11https://bugzilla.gnome.org/show_bug.cgi?id=787731
Add testcase for function g_file_query_filesystem_info()
reporting outdated info for "filesystem::readonly" attribute
when said attribute was different in a previous mounted
partition in the same device (as GIO maintains a mounts cache
per 'st_dev' stat() member).
To trigger a mount operation, testcase uses program 'bindfs'
instead of 'mount --bind' as bindfs does not require root
privileges. And 'fusermount -u' command is used to unmount said
bindfs mount.
As a reference in Fedora, 'bindfs' is installed from 'bindfs'
package and 'fusermount' from 'fuse' package (this one is installed
by default as being part of 'System Tools' group).
The test creates a directory with a file in it, then mounts it
readonly over another directory (the mountpoint), it then checks
that g_file_query_filesystem_info() for the file in it indeed reports
"filesystem::readonly" as TRUE. Then unmounts and mounts again this
time rw (not readonly), it then checks again if g_file_query_filesystem_info()
is reporting "filesystem::readonly" as TRUE, if that's the case, it
confirms the bug by opening said file in write mode.
Testcase is only added for Unix builds.
https://bugzilla.gnome.org/show_bug.cgi?id=787731
This reverts commit 8028494335.
Adding (array length=…) to a gchar* parameter causes the GIR file to
contain an array of strings, rather than an array of characters. While
we fix GIR, revert those changes.
Some of the other changes in the file (which have an explicit
(element-type) already) are fine.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=765063
The m4 and bash completion items are usable and relevant
depending on the host system's configuration. So, we check for the
presence of the programs that these items depend on, and only install
them when those programs are found.
For the Valgrind suppression files, we don't install them on Windows as
Valgrind is currently not supported on Windows.
Als fix the path where the GDB helpers are installed, as the path is
incorrectly constructed.
This will fix the "install" stage when building on Visual Studio at
least as there are some post-install steps that are related to them,
which will make use of these programs.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
I’m unsure what the original reasoning for returning TRUE by default
from supports_dtls was, but it is not backwards-compatible. If a
pre-existing GTlsBackend implementation never implements the
supports_dtls vfunc, the supports_dtls() method will magically return
TRUE rather than FALSE.
Since any backend which does implement DTLS should be implementing the
supports_dtls vfunc (and no DTLS-supporting backends have actually been
merged yet; see bug #697908), it seems safer to make this slight API
break in the name of backwards compatibility than to leave it as
returning TRUE incorrectly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=787485
Language bindings have so far been unable to implement the GListModel
interface because the ::get_item virtual function returns a
non-bindable type (gpointer). The `gpointer` type gets translated into
`void` by G-I meaning that get_item() implementations can't return any
items.
We can set the return type of the get_item() vfunc explicitly to
GObject, which fixes the issue.
This patch also removes the existing (type GObject) annotation on
g_list_model_get_item(), which is necessary because if its return type
matches that of the get_item() vfunc, G-I connects the two and
propagates the 'skip' annotation from one to the other resulting in the
get_item() vfunc being hidden. There's no API break here because the
'skip' annotation makes g_list_model_get_item() invisible to G-I users
anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=787271
Calling g_application_quit() ignores the hold count; this patch adds a
warning to the documentation about other code having a hold on the
application and expecting it to exist.
https://bugzilla.gnome.org/show_bug.cgi?id=737278
Setting a variable and then assigning it to itself avoids
-Wunused-but-set-variable but this specific trick is now caught by
-Wself-assign. Instead, actually use the value or don't bother
assigning it at all:
gdbusauthmechanismsha1.c: #ifdef a var decl to match its actual use use
gdbusauthmechanismsha1.c: call g_ascii_strtoll() in void context
https://bugzilla.gnome.org/show_bug.cgi?id=745723
Setting a variable and then assigning it to itself avoids
-Wunused-but-set-variable but this specific trick is now caught by
-Wself-assign. Instead, actually use the value or don't bother
assigning it at all:
gdbusauth.c: call g_data_input_stream_read_byte() in void context
gdbusauthmechanismsha1.c: value is actually used
gdbusmessage.c: use consistent preprocessor-token protection
gthreadedresolver.c: skip over bytes in data blob
httpd.c: do something useful with the value
https://bugzilla.gnome.org/show_bug.cgi?id=745723
It's not likely that the runtime of a bound language using the
introspection supports running in a process forked by a foreign
library, so that a closure programmed in that language would work
safely.
Any programming environment supporting that would probably have
its own advanced facilities for process spawning, or be able
to access the GLib spawning APIs via raw C bindings (still
represented in the introspection, (skip) only adds a flag)
and do any low-level preparatory dances as necessary for the
forked runtime.
Note that there are other APIs making use of GSpawnChildSetupFunc,
but they are usable with the closure nullified, and we cannot annotate
the closure parameters away because that would break the annotated API
for bindings; accordingly to bug #738176 comment #3, the current bindings'
users are expected to pass null.
Make it a bit more obvious when the DTLS methods aren’t implemented by a
particular TLS backend; return an invalid type rather than crashing.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=752240
Instead of a full reference, which causes problems for clients that
expect a GSettings instance to stop firing signals once they drop the
last reference.
https://bugzilla.gnome.org/show_bug.cgi?id=780861
See bug #786456 for a detailed analysis of the situation which can cause
this (in summary, if a g_subprocess_wait_async() call is cancelled on a
GSubprocess which is already known to be dead).
The problem was that the GCancellable callback handler was
unconditionally returning a result for the GTask for
g_subprocess_wait_async(), even if that GTask had already returned a
result and the callback was being invoked after the GTask had been
removed from the pending_waits list.
Fix that by checking whether the GTask is still in the pending_waits
list before returning a result for it.
Thanks to Will Thompson for some very useful unit tests which reproduce
this (which will be pushed in the following commit).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=786456
Similarly to the previous commit, move the temporary directory for the
monitor test from $(cwd) to the system temporary directory.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785260
Rather than creating a temporary directory in the current directory
(typically the builddir), then never deleting it; create one in the
system /tmp directory, and clean it up properly afterwards.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785260
The following warning is shown, when both g_output_stream_write and
g_output_stream_close fail:
"GError set over the top of a previous GError or uninitialized memory."
Let's clear the error after use.
https://bugzilla.gnome.org/show_bug.cgi?id=786463
We want to set _WIN32_WINNT so that functions will be properly found in
the headers, to target the NT6.1+ (Windows 7+) APIs.
Also improve the checks for if_nametoindex() and if_indextoname() on
Windows as they are supported in Windows Vista+, but they have
to be checked by linking against iphlpapi.lib (or -liphlpapi). On other
platforms, they are still checked as they were before.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
Some of the dependencies' build systems for Visual Studio do not provide a
pkg-config file upon build, so we use find_library() for them when the
corresponding pkg-config files are not found during Visual Studio builds,
so that one will not need to make up pkg-config files for them, which
could be error-prone. These .lib names match the names that are built
with the officially supported build system that is used by their
respective Visual Studio support.
For ZLib, this will make gio-2.0.pc reflect on the zlib .lib based on
what is found, or whether we use the fallback/bundled ZLib, when we
don't have a pkg-config file for ZLib on MSVC. We still need to depend
on Meson to be updated to put the correct link argument for linking ZLib
in the pkg-config case.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
Calling g_variant_get (parameters, "(&s)") when parameters has a
signature other than (s) is considered to be a programming error.
In practice the message bus (dbus-daemon or a reimplementation) should
always send the expected type, but be defensive.
(Modified by Philip Withnall to improve type check.)
Signed-off-by: Simon McVittie <smcv@collabora.com>
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=784392
PulseAudio and LibreOffice are among the services that use this flag.
Refusing to queue for a name lets you do this transaction,
but atomically, avoiding the transient state where you briefly join
the queue and then are given the name when its primary owner drops it:
result = RequestName(name)
if result == IN_QUEUE:
ReleaseName(name)
result = EXISTS
return result
(Modified by Philip Withnall to add documentation.)
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=784392
The implementation passes flags through directly to the RequestName()
call, so if any new values break that equivalence, the implementation
will have to be changed.
Signed-off-by: Simon McVittie <smcv@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=784392
If no callback is provided, token is never set, but it’s then passed to
g_variant_new_string(), which requires a non-NULL input.
Fix that by moving all the option handling inside the (callback != NULL)
case.
Spotted by Coverity (CID #1378714).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785817
Little did I know when making commit
c257757cf6 that a lot of the output of
glib-compile-schemas is string matched in some of the unit tests. Fix
them to match the updated strings.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=695573
Some platforms use different extensions for compile-time linkable
libraries vs runtime-loadable modules. Need to use special libtool
flag in the latter case for consistency with what gmodule expects.
https://bugzilla.gnome.org/show_bug.cgi?id=731703
• Fix capitalisation to be consistent
• Use Unicode quotation marks where appropriate
• Move trailing \n characters out of the translable strings and append
them unconditionally
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=695573
Mention that it really is a good idea to save errno before doing
literally anything else after calling a function which could set it.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785577
Prevent the situation where errno is set by function A, then function B
is called (which is typically _(), but could be anything else) and it
overwrites errno, then errno is checked by the caller.
errno is a horrific API, and we need to be careful to save its value as
soon as a function call (which might set it) returns. i.e. Follow the
pattern:
int errsv, ret;
ret = some_call_which_might_set_errno ();
errsv = errno;
if (ret < 0)
puts (strerror (errsv));
This patch implements that pattern throughout GLib. There might be a few
places in the test code which still use errno directly. They should be
ported as necessary. It doesn’t modify all the call sites like this:
if (some_call_which_might_set_errno () && errno == ESOMETHING)
since the refactoring involved is probably more harmful than beneficial
there. It does, however, refactor other call sites regardless of whether
they were originally buggy.
https://bugzilla.gnome.org/show_bug.cgi?id=785577
The /etc/mtab file is still used by some distributions (e.g. Slackware),
so it has to be monitored instead of /proc/self/mountinfo in order to
avoid races between g_unix_mounts_get and "mounts-changed" signal. The
util-linux is built with --enable-libmount-support-mtab in that case and
mnt_has_regular_mtab is used for checks. Let's use mnt_has_regular_mtab
also to determine which file to monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=779607
Unlike g_application_register, there is no public API to unregister the
GApplication from D-Bus. Therefore, if the GApplication is set up
manually without using g_application_run, then neither can the
GApplicationImpl be destroyed nor can dbus_unregister be called before
destruction.
This is fine as long as no sub-class has implemented dbus_unregister.
If they have, their method method will be called after destruction, and
they should be prepared to deal with the consequences.
As long as there is no public API for unregistering, let's demote the
assertion to a WARNING. Bravehearts who don't use g_application_run
can continue to implement dbus_unregister, but they would have been
adequately notified.
This reverts commit c1ae1170fa.
https://bugzilla.gnome.org/show_bug.cgi?id=725950
Invoking the dbus_unregister virtual method during destruction is
problematic. It would happen after a sub-class has dropped its
references to its instance objects, and it is surprising to be asked to
unexport exported D-Bus objects after that.
This problem was masked as a side-effect of commit 21b1c390a3.
Let's ensure that it doesn't regress by asserting that dbus_unregister
has happened before destruction.
Based on a patch by Giovanni Campagna.
https://bugzilla.gnome.org/show_bug.cgi?id=725950
When using the Freedesktop backend for GNotification, it seems like a
better idea to map G_NOTIFICATION_PRIORITY_HIGH to NOTIFY_URGENCY_NORMAL
(instead of NOTIFY_URGENCY_CRITICAL) provided that the difference
between GNotification's NORMAL and HIGH priorities is minor.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=784815
When building glib as a subproject, #include's for xdp-dbus.h from xdp-dbus.c
and for gdbus-daemon-generated.h from gdbus-daemon-generated.c were generated as
being prefixed with the subproject prefix, eg
#include "subproject/glib/gio/gdbus-daemon-generated.h".
That failed since the root of the build directory is obviously not part of the
include path when building a subproject.
Passing --output-directory @OUTDIR@ to gdbus-codegen and removing @OUTDIR@ from
--generate-c-code fixes the issue.
meson.source_root() returns the toplevel source directory
of the toplevel project, thus the paths were wrong when using
it. Simply using files() gets us the right path
https://bugzilla.gnome.org/show_bug.cgi?id=784133
With meson from git dependencies of dependencies are no
longer added automatically and recursively to the linker
lines. Meaning dependencies that are used have to be
passed directly and explicitly or we'll get linker errors.
Need to fix up some of the tests a little, because the
test binary will not necessarily be run from the current
build sub-directory, and the build directory structure
might not always be a mirror of the source directory
structure, so pass location of glib-mkenums and
glib-compile-scheme and such directly.
This reduces the build-time dependencies of glib to only Python 3,
Meson, and git. Git is also optional if you provide a tarball in
which the subproject directories already exist.
The Python port was done by Jussi Pakkanen on bugzilla:
https://bugzilla.gnome.org/show_bug.cgi?id=779332
This version contains some fixes from that and also changes all
instances of `@` to `\u0040` because Meson does not yet provide a
configure_file() mode that ignores unknown @MACRO@ values.
This is a stub-only library that can be used while building against
MSVC and contains no i18n machinery at all.
The dependencies added indirectly use the libintl.h header, and when
built as a subproject, the header won't be in a path known the
pre-processor.
Don't use it project-wide for building everything. Otherwise
symbols for shared modules won't be exposed, e.g. in the
resourceplugin used by the gio resource unit test.
giomodule test needed symbol visibility pragmas added. This is needed on
Windows anyway, so it's better to do it this way rather than disabling
-fvisibility=hidden for the test modules.
Disable gio tests on Windows, fix .gitignore to not ignore
config.h.meson, and add more things to it.
Rename the library file naming and versioning to match what Autotools
outputs, e.g., libglib-2.0.so.0.5000.2 on Linux, libglib-2.0-0.dll and
glib-2.0-0.dll on Windows with MSVC.
Several more tiny fixes, more executables built and installed, install
pkg-config and m4 files, fix building of gobject tests.
Changes to gdbus-codegen to support out-of-tree builds without
environment variables set (which you can't in Meson). We now add the
build directory to the Python module search path.
g_build_filename() returns a gchar*, but it was stored in a const gchar*
and then g_free()d, which is wrong and led to a warning about the const
qualifier being cast away.
The g_file_copy() documentation didn't mention if
G_FILE_COPY_ALL_METADATA was applicable or not, and users were led to
call g_file_copy_attributes() to specify it after the g_file_copy()
call, unless they checked the source (been there, done that).
https://bugzilla.gnome.org/show_bug.cgi?id=784037
FreeBSD, DragonflyBSD and NetBSD support O_NOFOLLOW, but they use error
numbers that are different from what POSIX standard specifies. They are
not going to change the behavior, and existing programs on these systems
already take advantage of this difference. To support them, we have to
add a check in GIO to use different error numbers on these systems.
https://bugzilla.gnome.org/show_bug.cgi?id=775593
For historical reasons, the reference dbus-daemon responds to most
method calls on all object paths. However, the canonical path
of the object implementing the o.fd.DBus interface is
/org/freedesktop/DBus, and in some environments (notably AppArmor
with the <abstractions/dbus-session-strict> abstraction) only this
path is allowed.
https://bugs.freedesktop.org/show_bug.cgi?id=101256 officially
deprecates all other object paths, and when adding new APIs we will
only make them available on the canonical object path.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Emmanuele Bassi <ebassi@gnome.org>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=783593
The caller passes in a GString instance which is then modified by the
function, rather than the function building its own GString and passing
it out to the caller.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=783392
For the files in gio/ (but not in gio/ sub-directories), only the *.[ch]
files were handled in commit 3bf4a720c3.
For the modified files in glib/tests/markups/, I've tested that
`make check` still succeeds.
After this commit,
$ git grep -in "GNU Library"
and
$ git grep -in "Library General"
return only results in COPYING files and in glib/libcharset/. The latter
was not updated because it's a copy.
$ git grep -in "version 2" | grep -iv "version 2\.1"
now doesn't return any LGPL license header.
- glib-gettextize.in: GPL
- glib/gen-unicode-tables.pl: GPL
- glib/gnulib/: a copy
- glib/libcharset/: a copy
- m4macros/attributes.m4: GPL
- po/po2tbl.sed.in: GPL
- tap-driver.sh: GPL
- tests/*.pl: GPL
https://bugzilla.gnome.org/show_bug.cgi?id=776504
If g_dbus_unwatch_name() is called from one thread at the same time as
the GDBusConnection is emitting ::disconnected in another thread, there
will be a race and the handler for ::disconnected may end up using
memory after it’s freed.
Fix this by serialising through the map_id_to_client, so that
on_connection_disconnected() atomically gets a strong reference to the
Client, or NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=777307
Previously, this was done at the time of spawning the subprocess, which
meant the g_subprocess_launcher_*_environ() functions could not be used
to modify the parent process’ environment.
Change the code to copy the parent process’ environment when
g_subprocess_launcher_set_environ(NULL) is called. Document the change
and add a unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=778422
Since GtkApplication auto-loads some well-known resource paths. Add a
cross-reference to its documentation. (The cross-reference won’t be
linked if the GTK+ documentation isn’t available at build time, but this
is probably good enough. It is likely to be available.)
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=782336
The OpenURI portal has a separate method to handle local
files now. Use it.
At the same time, split out the openuri helpers into separate
files, and generate code for the OpenURI portal.
https://bugzilla.gnome.org/show_bug.cgi?id=783193
In addition to code, gdbus-codegen can also generate docbook
documentation for DBus interfaces. There's no good reason why
the newly added --output-directory option shouldn't apply to
those generated files as well.
https://bugzilla.gnome.org/show_bug.cgi?id=783201
When we call org.freedesktop.Application.Open to activate
an application and pass file uris, the application may not
be able to see the files due to a flatpak sandbox.
Flatpak puts the flatpak app-id in the X-Flatpak key in
desktop files that it exports, so we can easily recognize
applications that may be affected by this.
In this case, call the document portal to export the files
and pass the resulting uri's instead of the original ones.
https://bugzilla.gnome.org/show_bug.cgi?id=783130
Add $XDG_DATA_HOME/glib-2.0/schemas as a schema source, after (higher
priority than) $XDG_DATA_DIRS/glib-2.0/schemas but before
$GSETTINGS_SCHEMA_DIR. This is per the XDG Base Directory Specification,
which states that user specific versions of data in $XDG_DATA_DIRS can
be created in $XDG_DATA_HOME.
https://bugzilla.gnome.org/show_bug.cgi?id=741335
Currently, all mime types are considered subclasses of
application/octet-stream, but according to the freedesktop
standard, everything but the inode/* types is a subclass of
application/octet-stream.
Update the special case for application/octet-stream so that all
types but inode/* will match with it and add unit test for it.
https://bugzilla.gnome.org/show_bug.cgi?id=782311
g_dbus_connection_call_internal() accesses the user data it passes to
g_dbus_connection_send_message_with_reply() after the call. That data
might be freed already in the case that the callback is called
immediately.
Fix this by removing the 'serial' field from the user data altogether
and fetch the serial from the message in the callback.
https://bugzilla.gnome.org/show_bug.cgi?id=748263
mnt_table_is_fs_mounted causes unwanted automount requests due to
canonicalization of source and target. It might be replaced by
mnt_table_find_source as per the documentation in order to prevent
the automounts, but it is redundant. All mtab entries should be already
mounted and thus mnt_table_is_fs_mounted result is always true (it
basically checks that the fs from mtab is in mtab). Let's remove
the check at all.
https://bugzilla.gnome.org/show_bug.cgi?id=781867
libmnt_context is useless. It contains cache which is useful for searching,
but it isn't used in our case. Let's use mnt_context_parse_mtab instead
directly and the mtab processing will be faster.
https://bugzilla.gnome.org/show_bug.cgi?id=781867
The GNetworkMonitor docs were talking about one implementation,
omitting the others. While fixing that, add a bit about implementations
to the GProxyResolver docs too.
When we are inside a sandbox, we want to use the portal
implementation, since it is the only one that has a chance
of working.
This is safe to do, since the portal implementation will
just fail initialization when loaded outside a sandbox.
The flatpak-info file was moved to a different location a while
ago, we should read it from there instead of relying on the
compat symlink. One advantage is that this is a fixed, short
path, we don't have to construct one dynamically.
https://bugzilla.gnome.org/show_bug.cgi?id=781826
Looks like the author started typing one thing, then changed their mind
about how to phrase the sentence, and typed something else.
Signed-off-by: Philip Withnall <philip@tecnocode.co.uk>
Otherwise, we might end up returning TRUE from
g_app_info_launch_default_for_uri but with a set error parameter. This
will lead to confusing results depending on how the caller checks for
errors. Checking error != NULL indicats the call failed but checking the
return value indicates that it succeeded.
There are a few places where commit 18a33f72 replaced valid (nullable)
(optional) annotations with just (optional). That has a different
meaning.
(nullable) (optional) can only be applied to gpointer* parameters, and
means that both the gpointer* and returned gpointer can be NULL. i.e.
The caller can pass in NULL to ignore the return value; and the returned
value can be NULL.
(optional) can be applied to anything* parameters, and means that the
anything* can be NULL. i.e. The caller can pass in NULL to ignore the
return value. The return value cannot be NULL.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Some annotations I made while trying to debug bug #781847. They
introduce no behavioural changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Compiling with clang 3.8.1-18 (debian, x86_64) I ran across this
error:
gio-tool.c:40:31: error: format string is not a string literal [-Werror,-Wformat-nonliteral]
message = g_strdup_vprintf (format, args);
^~~~~~
gio-tool.c:55:31: error: format string is not a string literal [-Werror,-Wformat-nonliteral]
message = g_strdup_vprintf (format, args);
^~~~~~
2 errors generated.
To fix the first one, related with the function print_error(), this
patch adds to the function prototype a compiler's attribute.
For the second one, since the usage of that function is to print
one string and the format is already provided, the patch simplifies
the function by no receiving variadic arguments.
https://bugzilla.gnome.org/show_bug.cgi?id=781125
It's unnecessary, and only adds visual noise; we have been fairly
inconsistent in the past, but the semi-colon-less version clearly
dominates in the code base.
https://bugzilla.gnome.org/show_bug.cgi?id=669355
The g_drive_is_removable() support was added recently in gio/gvfs
(see Bug 765900 and Bug 765457). It was also added in gvfs-mount,
but we forgot to add it also in gio-tool-mount.
https://bugzilla.gnome.org/show_bug.cgi?id=776169
This patch contains the following changes:
- Print all errors with "gio: " prefix
- Print file uri in error for each tool allowing multiple locations
- Mark all error messages translatable
- Do not leak strings used in error messages
- Always start error messages with capital letter
- Unify some error messages across various tools
- Fix addional/missing new line characters
https://bugzilla.gnome.org/show_bug.cgi?id=776169
Being able to determine that a certificate chain is invalid is not
considered an error, but success. This might not be obvious at first
due to the way the method is named and described currently. Since we
cannot change the name, let's improve the description and clarify this
aspect of its behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=780310
g_dbus_proxy_get_cached_property() and
g_dbus_proxy_get_cached_property_names() can both return NULL if the
property cache is empty. Avoid a crash if this situation arises (which
it looks like it could, from reading the code) by gracefully bailing out
on NULL return values.
Coverity issues: #1257044, #1257045https://bugzilla.gnome.org/show_bug.cgi?id=741229
socket->priv->timeout is only a guint, and the multiplication is
performed before it’s widened to gint64 to be stored in start_time
(thanks, C). This means any timeout of 50 days or more would overflow.
Fixing this bug makes me feel a real sense of self-worth.
Coverity ID: 1159478
Signed-off-by: Philip Withnall <withnall@endlessm.com>
request_completion is checked several blocks higher in the function.
Spotted by Coverity.
Coverity ID: 1373215
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The previously documented requirements for implementing init() and
init_async() as completely idempotent were really quite hard to achieve,
and brought a lot of pain for very little gain. Many implementations of
GInitable and GAsyncInitable did not actually follow the requirements,
or did not correctly handle concurrent init_async() calls.
Relax those requirements so that classes can decide whether their init()
or init_async() implementations need to be idempotent.
https://bugzilla.gnome.org/show_bug.cgi?id=766660
This is effectively the mc-wait-for-name tool from
telepathy-mission-control; moving it in to gdbus-tool will make it more
widely useful without making people depend on telepathy-mission-control
for no other reason. The code here is reimplemented from scratch to use
GDBus.
It blocks until the specified well-known name is owned by some process
on the bus (which can be the session, system, or any other bus). By
passing --activate, the same (or a different) name can be auto-started
on the bus first.
A timeout can be specified to ensure the process doesn’t block forever.
https://bugzilla.gnome.org/show_bug.cgi?id=745971
This will help us break generic GType deadlocks between people using
GDBus in different threads (which is supported), not just by GType
usage in the GDBus thread.
This should fix the common cases we're seeing in the wild, although I
have some lingering concerns that if someone e.g. referenced
e.g. `G_TYPE_DBUS_AUTH_MECHANISM_SHA1` etc. we'd need to add those
too.
https://bugzilla.gnome.org/show_bug.cgi?id=674885
We currently assume that the OpenURI portal should be used
unconditionally when running inside a flatpak sandbox. While
the portal is what we usually want, there are exceptions:
Yelp is now included in the GNOME runtime to allow displaying
help without exporting the user documentation, and the sandboxed
app itself may register a scheme handler.
To account for those cases transparently, always try the normal
code path first and only fall back to calling the portal when
that fails.
https://bugzilla.gnome.org/show_bug.cgi?id=780471
These calls cause race warnings from tsan, but are not a thread safety
problem, because we can only ever observe single bit changes: all
modifications to the GSource.flags field are done with a lock held; all
reads are of independent fields, so no intermediate state can ever be
observed. This assumes that a non-atomic read will consistently give us
an old value or a new value.
In any case, these g_source_is_destroyed() calls can happen from any
thread, and the state could be changed from another thread immediately
after the call returns; so the checks are pointless. In addition,
calling g_source_set_ready_time() or g_source_destroy() on a destroyed
source is not a problem.
https://bugzilla.gnome.org/show_bug.cgi?id=778049
Calling the D-Bus method for the OpenURI portal "protects" the logic from
not ever having the remote method running in case the xdg-desktop-portal
process is not yet running and the caller quits quickly after the call.
This should not be a problem as the method returns immediately (regardless
of the user making a selection), but making it synchronous would prevent
situations where the OpenURI method would never be called because of D-Bus
dropping the message after the caller dies, without explicitly waiting for
a reply.
https://bugzilla.gnome.org/show_bug.cgi?id=780441
Actually, Unicode changes to this file got reverted in
2d56c49b10. Also, there is
"No such interface '%s'" string already, so we avoid
breaking the string freeze.
g_subprocess_launcher_spawn() is NULL-terminated, and must have a
non-NULL argv0 specified, so G_GNUC_NULL_TERMINATED is appropriate here.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=780032
This highlighted a bug in GDBusConnection, where an interface name was
not included in a message referring to it.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=780032
This is an implementation of most of GAppInfo using the OS X
NSBundle APIs.
Missing at this point are things that don't have equivalents
in OS X, such as hidden desktop files, last-used, manual type
associations, and g_app_info_get_all().
https://bugzilla.gnome.org/show_bug.cgi?id=734946
This is an implementation of most of GContentType using the OS X
UTType APIs.
Missing at this point is an implementation of
g_content_types_get_registered() and g_content_type_guess_for_tree().
https://bugzilla.gnome.org/show_bug.cgi?id=734946
Previously, _kh_cancel_sub assumed that it only needed to call
_km_remove if sub did not exist in subs_hash_table. This is erroneous
because the complementary operation, _km_add_missing, can be called
from process_kqueue_notifications, in which context sub can *only* have
come from subs_hash_table.
Since _km_remove is implemented using g_slist_remove, which is
documented to be a noop if the list does not contain the element to be
removed, it is safe to call _km_remove unconditionally here.
https://bugzilla.gnome.org/show_bug.cgi?id=778515
g_settings_schema_source_get_default() is (transfer none), not (transfer
full).
Spotted by Marvin Schmidt.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=779265
On the warning/critical error handling paths for g_settings_set(), the
GVariant value was not ref-sunk, and the schema key was leaked. This
won’t affect code in production (unless it’s seriously buggy), but
eliminates some leaks from the error testing paths in the GSettings
tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=779265
Spotted while running `make check` under Valgrind. While it’s not
necessary to fix memory leaks in glib-compile-schemas (since it’s a
utility which runs briefly then exits), fixing them makes more
legitimate leaks in the Valgrind output more obvious, and means we can
be sure there aren’t leaks in the underlying GLib/GIO code which
glib-compile-schemas is calling.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=779265
When unregistered extension point (i.e. NULL pointer) is passed
to `g_io_extension_point_get_extensions`, it causes a segfault.
This commit adds an assertion, to prevent this.
https://bugzilla.gnome.org/show_bug.cgi?id=779183
Happens when the waiting-for-auth state is re-entered:
SERVER_STATE_WAITING_FOR_AUTH
|
v
G_DBUS_AUTH_MECHANISM_STATE_REJECTED
|
v
SERVER_STATE_WAITING_FOR_AUTH
Causing the previous `mech` pointer to get overwritten.
https://bugzilla.gnome.org/show_bug.cgi?id=778991
We're first getting the notification by its notify_id, but activating
the action afterwards could redraw it, leading to a dangling pointer.
Fix this by simply searching the list of active notifications again
after activating the action.
GNOME Builder's code was assuming that setting the launcher's
environ to NULL makes the subprocess have an empty environment, but in
fact the parent process's variables are still inherited because execv is
used instead of execve when envp is NULL. This commit clarifies the
documentation to make the behavior clear.
https://bugzilla.gnome.org/show_bug.cgi?id=778422
Add filesystem attribute to propagate time, when the metadata for the file
in "recent:///" was last changed. This attribute is needed for sorting
recent backend files in client applications.
https://bugzilla.gnome.org/show_bug.cgi?id=777507
This is small enough that it shouldn't cause problems on most machines
we support, but big enough to increase throughput on a lot of devices
and network protocols.
Note that the actual value is 256k minus malloc overhead, so that it
fits nicely in a 256k block (as suggested by Alexander Larsson).
See https://bugzilla.gnome.org/show_bug.cgi?id=773632https://bugzilla.gnome.org/show_bug.cgi?id=773823
It was suggested that the project files be moved here as we don't actually
need to go two directory layers from $(srcroot), and would help us to
standardize on things in the future across the board.
When performing the verify and building the error string there were two
possibilities of an infinite loop. The first is the missing twos-complement
to unset the bit in the filtered flags. The second is the lack of handling
G_SUBPROCESS_FLAGS_NONE which can return a valid GFlagsValue (and cannot
unset the bit since the value is zero).
This walks all known values in the GSubprocessFlags type class and check
if they are set. This has the benefit that we don't call needless functions
which walk the same table as well as avoiding mutating values to build
the error string.
https://bugzilla.gnome.org/show_bug.cgi?id=775913
When an invalid hostname is passed for connection, the
g_hostname_to_ascii() might fail when creating the request in
create_request(). Make sure that error is caught and reported rather
than passing "(null)" as the hostname of the site we want to connect to.
https://bugzilla.gnome.org/show_bug.cgi?id=772989
The tests defaultvalue, gdbus-peer and gdbus-unix-addresses will fail
without DBUS, so only run them in case we HAVE_DBUS_DAEMON.
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
https://bugzilla.gnome.org/show_bug.cgi?id=767609
WSAWaitForMultipleEvents() only returns for one of the waiting threads, and
that one might not even be the one waiting for the condition that changed. As
such, only let a single thread wait on the event and use a GCond for all other
threads.
With this it is possible to e.g. have an UDP socket that is written to from
one thread and read from in another thread on Win32 too. On POSIX systems this
was working before already.
https://bugzilla.gnome.org/show_bug.cgi?id=762283
-2LL<<34 is undefined, because left-shifting a negative number is
undefined (it was implementation-defined behaviour in C99, but
is formally undefined in C11). The undefined behaviour sanitizer
picks this up.
Signed-off-by: Simon McVittie <smcv@debian.org>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=775510
Reviewed-by: Colin Walters
glibc string.h declares memcpy() with attribute(nonnull(1,2)), causing
calls with NULL arguments to be treated as undefined behaviour.
This is consistent with ISO C99 and C11, which state that passing 0
to string functions as an array length does not remove the requirement
that the pointer to the array is a valid pointer.
gcc -fsanitize=undefined catches this while running OSTree's test suite.
Similarly, running the GLib test suite reports similar issues for
qsort(), memmove(), memcmp().
Signed-off-by: Simon McVittie <smcv@debian.org>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=775510
Reviewed-by: Colin Walters
_g_dbus_auth_mechanism_server_data_send may fail in which case
we would endup getting a NULL data. In this case we should not
try to encode the data and simply let the state machine to continue.
The auth mechanism will change internally to REJECTED so we just
need to continue the iteration.
https://bugzilla.gnome.org/show_bug.cgi?id=775309
If we have an input parameter (or return value) we need to use (nullable).
However, if it is an (inout) or (out) parameter, (optional) is sufficient.
It looks like (nullable) could be used for everything according to the
Annotation documentation, but (optional) is more specific.
If g_socket_receive_message_with_timeout() is called with messages ==
NULL set the msg_control buffer to empty to not request the control
messages from recvmsg() at all.
This completely disables the control message processing and reduces
overhead, which might be critical at high packet rate.
https://bugzilla.gnome.org/show_bug.cgi?id=774520
This commit broke some tests, and I don't have the time
to fix up all the expected output, so I'll revert the changes
to the affected files for now.
This needs to be redone with the necessary test fixes.
I'm guessing the developments were done in 2.44 but the patches landed
after the 2.45.0 bump without an update to the Since tags.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=769630
GLib has g_unix_mount_at (mount_path) already, let's add g_unix_mount_for
(file_path) for whatever path. GLib already contains some private code
for such task. Let's make this code public. This functionality is needed
by GVfs (see Bug 771431) in order to avoid copy-and-pasting.
https://bugzilla.gnome.org/show_bug.cgi?id=772160
There have been some improvements to the tool recently, but it's hard to
know if those are available on a given system unless the tool provides a
--version commandline option.
https://bugzilla.gnome.org/show_bug.cgi?id=772269
It only works through its virtual methods, so while it could be
instantiated before (and this is technically an API break), any instance
of it would previously have crashed as soon as any of its methods were
called anyway.
If anybody has any problems with this ABI break, please make them known
during the 2.51 unstable development cycle and it can be reverted.
https://bugzilla.gnome.org/show_bug.cgi?id=772255
/proc/self/mountinfo is used to monitor changes of mounts with libmount.
However, GFileMonitor is used currently to monitor this file, which
doesn't work and consequently "changed" signal is never emitted. Special
monitoring needs to be used instead, same as it is used for /proc/mounts.
https://bugzilla.gnome.org/show_bug.cgi?id=662946
People might put more extraneous whitespace in a @since line in a
documentation comment, which should not affect the ordering of
methods/signals/etc. in the generated output.
https://bugzilla.gnome.org/show_bug.cgi?id=770372
Add --dependency-file=foo.d option to generate a gcc -M -MF style
dependency file for other build tools. The current output of
--generate-dependencies is only useful for use directly in Makefile
rules, but can't be used in other build systems like that.
The generated dependency file looks like this:
$ glib-compile-resources --sourcedir= test.gresource.xml --dependency-file=-
test.gresource.xml: test1.txt test2.txt test2.txt
test1.txt:
test2.txt:
test2.txt:
Unlike --generate-dependencies, the --dependency-file option can be
used together with other --generate options to create dependencies
as side-effect of generating sources.
Based on a patch by Tim-Philipp Müller in
https://bugzilla.gnome.org/show_bug.cgi?id=745754
The changes in this patch, compared to his are to always return
the hash table with file information from parse_resource_file, so
we can use it for dependency output, regardless if generate_dependencies
was TRUE or not.
Add --dependency-file=foo.d option to generate a gcc -M -MF style
dependency file for other build tools. The current output of
--generate-dependencies is only useful for use directly in Makefile
rules, but can't be used in other build systems like that.
The generated dependency file looks like this:
$ glib-compile-resources --sourcedir= test.gresource.xml --dependency-file=-
test.gresource.xml: test1.txt test2.txt test2.txt
test1.txt:
test2.txt:
test2.txt:
Unlike --generate-dependencies, the --dependency-file option can be
used together with other --generate options to create dependencies
as side-effect of generating sources.
Based on a patch by Tim-Philipp Müller.
https://bugzilla.gnome.org/show_bug.cgi?id=745754
Previously, this would not work, as it would result in comparing the
order of a string and an integer. Make it work, and make 'UNRELEASED'
compare higher than other versions so it's always treated as the latest
version.
'UNRELEASED' is commonly used by maintainers to highlight new API while
it's being prototyped, until they know which version it will actually
be released in. At the time of release, they replace all 'UNRELEASED'
strings in git with the new version number.
An example of this usage is here:
d380ac6a2a (9208ee267cb05db1afd3a5c323d71e51db489447_7619_7656)https://bugzilla.gnome.org/show_bug.cgi?id=769995
gcc 6 warns (fatally, by default) that %c only uses a 2-digit year
in some locales. The precise format does not seem to be important
for this sample code, so use ISO 8601 instead of suppressing the
warning with a pragma.
Signed-off-by: Simon McVittie <smcv@debian.org>
Reviewed-by: Colin Walters
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768453
At some point, upstream SystemTap changed from using a
STAP_HAS_SEMAPHORES preprocessor variable for this, to using
_SDT_HAS_SEMAPHORES instead. We need to update our build system to
disable that as well.
The original discussion about use of semaphores is here:
https://bugzilla.gnome.org/show_bug.cgi?id=606044
This was breaking the build with -flto enabled, either because -flto
doesn’t work with semaphores.
https://bugzilla.gnome.org/show_bug.cgi?id=768198
GDatagramBased allows connection-oriented and connection-less sockets,
but does not allow stream-based sockets (because it’s datagram-based).
So it supports SCTP and UDP, but not TCP.
Clarify that in the documentation, and people sometimes confuse
connection-oriented with stream-based, due to the prevalence of TCP.
Use mnt_context_get_mtab instead of using mnt_context_get_table(), since
that's the recommended way of accessing mtab/mountinfo information, and
also because that way the (struct libmnt_table *) will get automatically
deallocated when calling mnt_free_context()
https://bugzilla.gnome.org/show_bug.cgi?id=769238
g_socket_listener_add_address() is synchronous; all of the events will
have been emitted before it returns and it doesn't queue any sources.
The test was unintentionally depending on the fact that
g_main_context_iterate(NULL, TRUE) would return anyway (at least the
first time it was called), but that's no longer true after e4ee307.
https://bugzilla.gnome.org/show_bug.cgi?id=768968
glib-compile-resources --generate is supposed to automatically detect
whether to generate source code or header from the target's file extension.
However, this only worked for C; extend this to include the canonical
C++ filename extensions. Also make the check case insensitive.
https://bugzilla.gnome.org/show_bug.cgi?id=747134
Include the filename for the file in question in many of the
error messages in glocalfile.c. This is useful information when
diagnosing such errors, so make it easily available.
http://bugzilla.gnome.org/show_bug.cgi?id=754012
The recently-added GIO tools is intended to be built on all platforms, so
adjust the code a bit to enable this:
-Use gssize instead of ssize_t, as ssize_t is not supported by all
compilers.
-Include io.h on Windows, and define STDIN_FILENO and STDOUT_FILENO if
necessary on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=768357
Ensure that @key is non-%NULL on g_settings_reset().
It turns out that using g_settings_reset() with %NULL key (although
invalid as per the API documentation and not possible via bindings)
accidentally produces the same effect as the _reset_all() API that we
are about to add.
Add the standard precondition checks to prevent that from happening.
https://bugzilla.gnome.org/show_bug.cgi?id=744678
GSettings objects were not unreffed in test_flags, test_enums and
test_ranges tests and when we skip internationalization tests, ie
test_l10n(_context).
https://bugzilla.gnome.org/show_bug.cgi?id=768560
The two known use-cases for autolaunching are:
* X-forwarding: "ssh -Y myhost myapp" resulting in a
session bus on myhost but an X server on the original host
* Legacy desktop environments on OSs without D-Bus integration:
e.g. running a single GNOME or KDE app under fvwm or something,
without a session dbus-daemon being started by either systemd,
gnome-session, or OS integration scripts analogous to Debian's
/etc/X11/Xsession.d/75dbus_dbus-launch
In either case, an X11 DISPLAY is also needed.
"dbus-launch --autolaunch" doesn't do anything useful when unable
to connect to an X11 display; this has been the case since the feature
was added in 2006, and is useful to avoid "split brain" situations in
which two processes that ought to be part of the same session end up
on separate session buses. Since dbus commit 407c111 in 2011,
libdbus hasn't even attempted to run "dbus-launch --autolaunch"
unless getenv("DISPLAY") returns non-null in the parent: this avoids
doing a relatively complicated fork-and-exec that is clearly not
going to lead to success. This commit gives GDBus the same policy.
This change was originally made to work around a race condition in
subprocess spawning (Debian bug #737380, GNOME bug #711090) but
it seems valid in its own right.
In my opinion as D-Bus maintainer, "dbus-launch --autolaunch" should
be considered to be an X11 feature, and any future D-Bus enhancements
(e.g. kdbus) or successors for X11 (e.g. Wayland, Mir) should obtain
a session bus address by other means - either a session manager
such as "systemd --user", gnome-session or Upstart, or a wrapper
for the user session like dbus-run-session(1).
Related to dbus bug <https://bugs.freedesktop.org/show_bug.cgi?id=19997>.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=723506
Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=737380
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
xdg-desktop-portal support is only usable on *NIX platforms, so don't build
them on non-*NIX platforms. Also clean up gio/Makefile.am a bit to split out
the listings for the platform-specific sources from the platform-neutral
sources, and assemble them for the final list of sources required for libgio.
https://bugzilla.gnome.org/show_bug.cgi?id=768498
OS X apparently stringifies the IPv6 address "::80" as "::0.0.0.128",
which is bizarre, but that address *is* in a "reserved for future use"
range, so it's not unambiguously wrong I guess. Anyway, fix the text
to use an address everyone can agree on.
https://bugzilla.gnome.org/show_bug.cgi?id=768551
The backend for this lives in xdg-desktop-portal,
and is in turn using GNetworkMonitor.
When network is not available in the sandbox, there is
no point in reporting accurately about the network
status outside the sandbox. Just return 'no connection'
in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=768498
We need to patch in the portal support at a high enough
level that GAppInfo is not involved - a sandboxed app may
not be able to see any applications, so it can only launch
the defaults.
Note that even though the API is called launch_default...,
the portal may still offer the user to choose the application
to launch.
https://bugzilla.gnome.org/show_bug.cgi?id=768498
These are private helper functions that will be used in
the following commits to get information about whether
we are running in a flatpak sandbox, etc.
We allow the use of GTK_USE_PORTAL=1 in the environment
to force the use of portals. This can be useful for
testing and debugging portal interaction.
https://bugzilla.gnome.org/show_bug.cgi?id=768498
This command collects the various commandline utilities that
are currently shipped in gvfs, and unifies them under a single,
command-style binary.
The tools just use GIO APIs, so it makes sense for them to live here.
In a vague attempt at ensuring the .stp scripts can be closely
associated with the .so files which they hard-code references to, rename
the scripts so they include the LT version — so that they are the .so
file name plus .stp.
This does not fix the fact that our .stp scripts will not work on
multiarch systems, as they are installed in an architecture-independent
directory (/usr/share/systemtap/tapset). At the moment, it is
recommended that any distribution who package the .stp files should
install them in the architecture-specific subdirectories of this (for
example, /usr/share/systemtap/tapset/x86-64).
A better long-term solution for this is under discussion upstream:
https://sourceware.org/bugzilla/show_bug.cgi?id=20264https://bugzilla.gnome.org/show_bug.cgi?id=662802
The list of supported schemes is not known at compile-time, so it is
wrong to iterate the list with G_N_ELEMENTS() and we miss all but the
first scheme. Fix by checking for the %NULL sentinel instead.
https://bugzilla.gnome.org/show_bug.cgi?id=768119
Add filesystem attribute to detect remote filesystems in order to
replace hardcoded filesystem types in GtkFileSystem. Set this attribute
also for GLocalFile appropriately.
Bump version to 2.49.3, so that early adopters of new API have a version
number to target.
If none of the closures in the hash table return a non-null value, the
loop never ends. Since the end of the hash table has been reached at
that point, g_hash_table_iter_next() starts asserting.
The possible fix is making the return value of g_hash_table_iter_next()
the condition in the loop.
https://bugzilla.gnome.org/show_bug.cgi?id=768029
Add a new API to allow clients to register a custom GFile implementation
handling a particular URI scheme.
This can be useful for tests, but also for cases where a different URI
scheme is desired to be used with another custom GFile backend.
As an additional cleanup, we can use this to register the "resource" URI
scheme too.
Based on a patch by Jasper St. Pierre <jstpierre@mecheye.net>.
https://bugzilla.gnome.org/show_bug.cgi?id=767887
5cea1c861d introduced accessors for 64bit
ints to gsettings, at which point the testcases were expanded.
Unfortunately, the expanded tests contained a bug: integer constants
passed to g_object_set() for a 64-bit property need an up-cast. Add
that now.
Problem found by Iain Lane.
If a backup file is created, opened successfully, then fstat() on it
fails (perhaps due to another process deleting it in the mean time?),
the FD will be leaked.
Coverity issue: #1159485https://bugzilla.gnome.org/show_bug.cgi?id=730187
Previously this would cause an assertion failure when checking the paths
of exported objects, as it would try to check that their paths started
with ‘//’ due to mishandling the root object case.
Includes a unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=761810
proxy->priv->name_owner gets overwritten in async_init_data_set_name_owner() on the
assumption that it will always be NULL when we get there. However,
on_name_owner_changed() can run first, and it does set name_owner.
==20126== 42 bytes in 6 blocks are definitely lost in loss record 15,174 of 48,256
==20126== at 0x4C280F3: malloc (vg_replace_malloc.c:299)
==20126== by 0x7541D00: g_malloc (gmem.c:104)
==20126== by 0x7558FEE: g_strdup (gstrfuncs.c:364)
==20126== by 0x6DF8E4F: on_name_owner_changed (gdbusproxy.c:1399)
==20126== by 0x6DE94C4: emit_signal_instance_in_idle_cb (gdbusconnection.c:3743)
==20126== by 0x753C315: g_main_dispatch (gmain.c:3066)
==20126== by 0x753C315: g_main_context_dispatch (gmain.c:3642)
==20126== by 0x753C667: g_main_context_iterate.isra.24 (gmain.c:3713)
==20126== by 0x753CA69: g_main_loop_run (gmain.c:3907)
==20126== by 0x5E38000: meta_run (main.c:556)
==20126== by 0x401EC0: main (main.c:441)
https://bugzilla.gnome.org/show_bug.cgi?id=755439
This fixes a build failure in Continuous that resulted in the error:
../../../gio/tests/test.gresource.xml: Failed to locate
'test-generated.txt' in any source directory.
Makefile:4676: recipe for target 'test.gresource' failed
make[6]: *** [test.gresource] Error 1
Nautilus wants to show entries in the sidebar only for removable devices.
It uses currently sort of conditions to determine which devices should be
shown. Those condition fails in some cases unfortunatelly. Lets provide
g_drive_is_removable() which uses udisks Removable property to determine
which devices should be shown. It should return true for all drives with
removable media, or flash media, or drives on usb and firewire buses.
https://bugzilla.gnome.org/show_bug.cgi?id=765900
This prevents testsuite from trying to build any TESTS in that
subdirectory, which will fail, because there are no TESTS defined
in that Makefile.am.
This happens when user runs make check TESTS=...
https://bugzilla.gnome.org/show_bug.cgi?id=766407
This adds a new --c-generate-autocleanup option to gdbus-codegen
which can be used to instruct gdbus-codegen about what autocleanup
definitions to emit.
Doing this unconditionally was found to interfere with existing
code out in the wild.
The new option takes an argument that can be
none, objects or all; to indicate whether to generate no
autocleanup functions, only do it for object types, or do it
for interface types as well. The default is 'objects', which
matches the unconditional behavior of gdbus-codegen on the 2.48
branch.
https://bugzilla.gnome.org/show_bug.cgi?id=763379
The use of past tense in g_task_had_error makes one assume that it
won't forget about any errors that might have occurred. Except, in
reality, it would.
Let's use a boolean flag to remember the error once it's been
propagated, as opposed to keeping the error around. This ensures that
the g_task_propagate_* methods continue to give invalid results when
called more than once, as mentioned in the documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=764163
Some GNOME projects unconditionally work around the generated code's
lack of g_autoptr support by defining the autoptr cleanup function
themselves, which is not forward-compatible; as a result, commit
cbbcaa4 broke them. Do not define the cleanup function unless the
including app "opts in" to newer APIs via GLIB_VERSION_MAX_ALLOWED.
Projects requiring compatibility with GLib < 2.49 can get a
forward-compatible g_autoptr for a generated GInterface type found in
a library, for example ExampleAnimal in the GIO tests, by declaring
and using a typedef with a distinct name outside the library's
namespace:
typedef AutoExampleAnimal ExampleAnimal;
G_DEFINE_AUTOPTR_CLEANUP_FUNC (AutoExampleAnimal, g_object_unref)
...
g_autoptr (AutoExampleAnimal) animal = NULL;
/* returns ExampleAnimal * */
animal = example_animal_proxy_new_sync (...);
/* takes ExampleAnimal * first argument */
example_animal_call_poke_sync (animal, ...);
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=763379
Reviewed-by: Colin Walters <walters@verbum.org>
Reviewed-by: Emmanuele Bassi <ebassi@gnome.org>
The rest of the generated classes gained g_autoptr support in fd6ca66,
but this one is still missing. Because whatever_proxy_new_finish() and
whatever_proxy_new_sync() are declared as returning a Whatever *
instead of a WhateverProxy *, and the generated method-call stubs
act on a Whatever *, it's reasonably common to want to declare a
g_autoptr (Whatever).
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Bug: https://bugzilla.gnome.org/review?bug=763379
Reviewed-by: Colin Walters <walters@verbum.org>
gdbus-tool prints a hint about the expected arguments to a function call
in case of errors. Unfortunately, it prints this message on all errors.
I've seen this confuse users several times -- they go on tweaking the
arguments trying to get the correct type, even though they had it
correct in the first place.
Let's limit the hint to the case where it was actually invalid arguments
that triggered the problem. Also, adjust the code that prints the
message so that it will also report on the case that no arguments were
expected.
We could possibly get closer to what we want by comparing the list of
expected arguments with the parameter list, as it was parsed from the
user, but that would involve composing the expected type. Let's keep
this simple for now.
https://bugzilla.gnome.org/show_bug.cgi?id=765710
When debugging a program or testing a change to an installed version, it
is often useful to be able to replace resources in the program or a
library, without recompiling.
To support this, for debugging and hacking purposes, it's now possible
to define a G_RESOURCE_OVERLAYS environment variable as a
colon-separated list of substitutions to perform when looking up
GResources.
A substitution has the form
"/org/gtk/libgtk=/home/desrt/gtk-overlay"
The part before the '=' is the resource subpath for which the overlay
applies. The part after is a filesystem path which contains files and
subdirectories as you would like to be loaded as resources with the
equivalent names.
In the example above, if an application tried to load a resource with
the resource path '/org/gtk/libgtk/ui/gtkdialog.ui' then GResource would
check the filesystem path '/home/desrt/gtk-overlay/ui/gtkdialog.ui'. If
a file was found there, it would be used instead.
Substitutions must start with a slash, and must not have a trailing
slash before the '='. It is possible to overlay the location of a
single resource with an individual file.
https://bugzilla.gnome.org/show_bug.cgi?id=765668
Replace the hand-written equivalent of this with the call to the
GHashTable built-in version to save a few lines of code.
The GResource code was written a couple of years before this function
existed.
Similarly, replace a set-mode usage of g_hash_table_insert() with a call
to g_hash_table_add().
https://bugzilla.gnome.org/show_bug.cgi?id=765668
GContextSpecificGroup has been somewhat broken for a rather long time:
when we remove the last reference on an object held in the group, we try
to clean up the source, but fail to actually remove it from the
mainloop.
We will soon stop emitting signals on the source (due to it having been
removed from the hash table) but any "in flight" signals will still be
delivered on the source, which continues to exist. This is a problem if
the event is being delivered just as the object is being destroyed.
This also means that we leave the source attached to the mainloop
forever (and next time will create a new one)...
This is demonstrated with the GtkAppChooser dialog which writes an
update to the mimeapps.list file just as it is closing, triggering the
app info monitor to fire just as it is being destroyed.
Karl Tomlinson correctly analysed the problem and proposed this fix.
https://bugzilla.gnome.org/show_bug.cgi?id=762994
GApplication has accepted any valid bus name as an application ID since
before the time of D-Bus activation. This includes bus names with '-'.
Several applications have even attempted support bus activation with
these names, going as far as installing D-Bus service files, without
realising that they are silently falling back to fork()/exec() on
account of the name containing a dash.
The reason for the problem is that D-Bus object paths cannot contain
dashes. We solved this problem privately in an unspecified way inside
of GApplication but substituting '_' in this case, but never made this
part of the Desktop Entry Specification.
The fact that these apps with '-' in the desktop file names aren't
actually using D-Bus activation is beside the point: their intent here
was clear. Let's avoid forcing them to rename their desktop files again
by simply accepting '-' in desktop file names and munging the path in
the way that GApplication did so historically.
The new path escaping code here has been copied more or less verbatim
from GApplication's own code for the same purpose, with only the removal
of one irrelevant part.
An update to the desktop entry specification will follow.
https://bugzilla.gnome.org/show_bug.cgi?id=764754
This was confusing some static analysis. Through canonicalize_filename()
at construction time, we guaranteed that ->filename is canonical and
absolute, so g_path_skip_root() should never fail.
https://bugzilla.gnome.org/show_bug.cgi?id=731988
This ensures that the generated file is always the same (not dependent
on the build machine's environment), making the build reproducible.
Thanks to Jérémy Bobbio <lunar@debian.org> for the Debian bug report and
patch.
https://bugzilla.gnome.org/show_bug.cgi?id=763617
Even though GetStartupInfo() in g_win32_run_session_bus() would
tell us that STARTF_FORCEONFEEDBACK flag is not set, it still
affects the rundll32 process for some reason.
This means that Windows WM changes mouse cursor to IDC_APPSTARTING for
a few seconds when rundll32 runs g_win32_run_session_bus(). Since
g_win32_run_session_bus() never satisfies the conditions set by
STARTF_FORCEONFEEDBACK, the busy cursor only goes away after a
timeout.
Fix this by explicitly running GetMessage(). To ensure that GetMessage()
doesn't block, post a quit message immediately before calling it.
https://bugzilla.gnome.org/show_bug.cgi?id=760694
Some applications support running in a mode where they present
themselves as a different application to the user (for example web
browsers or terminals).
To facilitate this, add an option --gapplication-app-id which allows
users to override an application's id from desktop files or similar.
Applications need to opt-in to this by setting the
G_APPLICATION_CAN_OVERRIDE_APP_ID flag.
https://bugzilla.gnome.org/show_bug.cgi?id=743933
currently schema_list will iterate over the default SchemaSource
list, and not the one associated with the passed in Schema. This
means schema_list can give incorrect results for a Schema fetched
from a non-default SchemaSource, like via new_from_directory.
https://bugzilla.gnome.org/show_bug.cgi?id=757506
Perform conversion before writing a value out of the cache into the registry,
and convert back when reading a value into the cache out of the registry.
The registry holds UTF-8 strings.
This is a flag used to understand if a key exists on the registry
and if it is readable. It makes more sense to rename it as readable
since anyway a key that does not exists anymore is a key that is
not readable.
The documentation of g_file_info_copy_into() was misleading. The
attributes are not just copied, @dest_info is also cleared at the
beginning. So any previously set attributes in @dest_info are lost.
There was a bug in gedit about this function, where some metadata were
not saved. So it might make sense to change the implementation to not
clear @dest_info, and copy one by one the attributes from @src_info to
@dest_info.
https://bugzilla.gnome.org/show_bug.cgi?id=747927
I'm tired of seeing 'No such file or directory' in the logs without
a hint as to what is actually wrong. Including the filename here
may help me tracking down a bug in the continuous infrastructure.
Visual Studio, at least the older versions, cannot use L on macros which
are defined as a constant string, plus the L must be applied to all string
literals here. This does not look nice, but this is life...
Rather than calculating it at configure time. This means it can expand
$libdir properly, and use the Make $(realpath) function rather than
invoking the non-portable `readlink -f`.
This fixes problems where `readlink` would be called on an invalid path
(due to a variable not being expanded) and would evaluate to "", which
would then cause things to be installed in the wrong place.
https://bugzilla.gnome.org/show_bug.cgi?id=744772
Add a new GDtlsConnection interface, plus derived GDtlsClientConnection
and GDtlsServerConnection interfaces, for implementing Datagram TLS
support in glib-networking.
A GDtlsConnection is a GDatagramBased, so may be used as a normal
datagram socket, wrapping all datagrams from a base GDatagramBased in
DTLS segments.
Test cases are included in the implementation in glib-networking.
https://bugzilla.gnome.org/show_bug.cgi?id=752240
We changed the behaviour of this API to adapt to a change in the D-Bus
specification. Document the new behaviour, along with the time of the
change.
https://bugzilla.gnome.org/show_bug.cgi?id=755421
gdbus sets NO_REPLY_EXPECTED when no callback is given to
g_dbus_connection_call(). It makes sense that it also handles the server
side correctly by discarding replies to clients that don't want one.
https://bugzilla.gnome.org/show_bug.cgi?id=755421
This causes several problems:
- Compilation in FreeBSD with --enable-gtk-doc broke
- Modules that still use the AM_GLIB_GNU_GETTEXT macro
doesnt compile anymore because /usr/share/glib-2.0/gettext
is not filled with the correct files, as this was done in
the glib custom po/Makefile.in.in
See https://bugzilla.gnome.org/show_bug.cgi?id=622991
This reverts commit e5c752371c.
I think it is a recursion from the GUnixMountMonitor constructor, to a
GLocalFileMonitor on /etc/fstab, and into GUnixMountMonitor again, now
with a mutex already held, so it deadlocks.
https://bugzilla.gnome.org/page.cgi?id=traceparser/trace.html&trace_id=235354
That mutex in glocalfile.c:g_local_file_find_enclosing_mount() doesn't
seem necessary any more IMHO. Inside it, only 'mount' is modified, but
that's just a stack variable local to this function. When
klass->get_mount_for_mount_path is called, it's given one const
parameter and the other is unused, so they're unchanged. 'klass'
doesn't seem it could be modified either inside that function.
It doesn't recurse infinitely, but seems to work correctly and pass the
testsuite after this change.
The FreeBSD project already applied my patch in their ports tree, and
their users seem happy with it.
See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=712848#64
and https://bugzilla.gnome.org/show_bug.cgi?id=753378
As g_win32_get_command_line() calls CommandLineToArgvW() to acquire the
arguments passed into a GApplication program, it actually returns the
whole command line which is used to invoke the program, including the
script interpreter and its flags when a script using GNOME bindings
(e.g. PyGObject and so on) is being invoked.
The issue here is that g_application_run() would most probably have
trouble in the scripts scenario on Windows as it is likely unable to
"recognize" the script interpreter, causing such scripts to fail to run.
Largely based on the patch by Ray Donnelly <mingw.android@gmail.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=734095
Otherwise, we'll acquire it on every loop iteration, which can leave us
vulnerable to racing another thread for the acquisition of the main
context.
This can break methods like g_main_context_invoke, which try to acquire
a context to figure out if it can invoke the method synchronously or
need to defer to an idle. In these cases, it isn't guaranteed that the
invocation function will be invoked in the default main context,
e.g. the one that GApplication is holding.
This also matches what GMainLoop is doing.
https://bugzilla.gnome.org/show_bug.cgi?id=752983
* On W32 use a real directory (SYSTEMROOT) instead of '/etc/'
* Disable test_symbolic_icon() as it can't be passed (symbolic icons are not
really supported)
* PowerPoint/Gettext test still fails, presumably because msvcrt qsort() moves
the entires (both have the same priority)
https://bugzilla.gnome.org/show_bug.cgi?id=735696
Allocate an empty cache object, check cache objects for being empty
before using them.
Otherwise the code will re-read cache every 5 seconds, as NULL cache
does not trigger the code that stores mtime, which makes the cache
file appear modified/unloaded permanently.
https://bugzilla.gnome.org/show_bug.cgi?id=735696
As per #578363, "if one requests e.g. strings via GOptionEntry.arg_data
then those are strduped and needs to be free'ed by the application."
Fixes following leak:
=================================================================
==29426==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 10 byte(s) in 1 object(s) allocated from:
0 0x7f3ab783d37a in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.2+0x9437a)
1 0x7f3ab70f7c82 in g_malloc /home/lebedevri/src/glib/glib/gmem.c:94
2 0x7f3ab70f7f60 in g_malloc_n /home/lebedevri/src/glib/glib/gmem.c:330
3 0x7f3ab713258e in g_strndup /home/lebedevri/src/glib/glib/gstrfuncs.c:425
4 0x7f3ab709c86b in strdup_len /home/lebedevri/src/glib/glib/gconvert.c:864
5 0x7f3ab709c966 in g_locale_to_utf8 /home/lebedevri/src/glib/glib/gconvert.c:905
6 0x7f3ab7103c32 in parse_arg /home/lebedevri/src/glib/glib/goption.c:1276
7 0x7f3ab71066fb in parse_long_option /home/lebedevri/src/glib/glib/goption.c:1670
8 0x7f3ab7108047 in g_option_context_parse /home/lebedevri/src/glib/glib/goption.c:1997
9 0x408532 in main /home/lebedevri/src/glib/gio/glib-compile-resources.c:629
10 0x7f3ab6c72b44 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21b44)
https://bugzilla.gnome.org/show_bug.cgi?id=757299
It's theoretically possible (and see in the wild) for D-Bus messages to
come in to the application after shutdown() has been called and while
we're draining out the lingering events in the main context.
Prevent this from happening by ensuring we unregister our objects on
D-Bus during the shutdown process.
https://bugzilla.gnome.org/show_bug.cgi?id=757372
Bug 13403 introduced support for the non-POSIX variants of these APIs
found on a system called "DG/UX". Meanwhile, the complicated checks
here are breaking cross-builds on systems that we actually care about.
Remove the complicated checks and replace them with AC_CHECK_FUNCS.
Remove the resulting dead code from a couple of .c files.
https://bugzilla.gnome.org/show_bug.cgi?id=756475
Add various (nullable) and (optional) annotations which were missing
from a variety of functions. Also port a couple of existing (allow-none)
annotations in the same files to use (nullable) and (optional) as
appropriate instead.
Secondly, add various (not nullable) annotations as needed by the new
default in gobject-introspection of marking gpointers as (nullable). See
https://bugzilla.gnome.org/show_bug.cgi?id=729660.
This includes adding some stub documentation comments for the
assertion macro error functions, which weren’t previously documented.
The new comments are purely to allow for annotations, and hence are
marked as (skip) to prevent the symbols appearing in the GIR file.
https://bugzilla.gnome.org/show_bug.cgi?id=719966
Commit 8ece2de964 transplanted a block of
code that contained an early-exit-on-error case which freed several
variables.
Because of the move, the normal-path unconditional free of one of these
variables is now above this early exit case, so if this block is hit, it
will now be a double-free.
Remove that.
https://bugzilla.gnome.org/show_bug.cgi?id=757693
It was removed, apparently accidentally, in commit 5b48dc4.
This had the side-effect that it wasn't included in tarball releases,
which means that commit ab7b4be doesn't work when building a package.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=734469
Reviewed-by: Colin Walters <walters@verbum.org>
The new "slowly add more task threads" code doesn't fully deal with
apps that queue lots and lots of tasks which then block on tasks from
their task threads. Fix this by bringing back the "task is blocking
other task" check and making sure that such tasks get bumped to the
front of the queue.
https://bugzilla.gnome.org/show_bug.cgi?id=687223
Recent changes to file monitors removed the delay before events were
reported. Among other things, this caused the trash backend of gvfs to
notice trashed files sooner than before.
On noticing trashed files, the backend tries to read the info file to
discover (among other things) the original location of the file.
Unfortunately, g_local_file_trash() does a strange dance when trashing a
file. It does a loop of open(O_EXCL) in order to file an empty filename
in the trash to write an info file to, trashes the file, and only then
writes the contents of the info file. This means that at the time the
file is moved to the trash, the info file is an empty stub.
Change the order so that we write out the actual content of the info
file first. If the actual trash files then we will unlink the info file
anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=749314
Add string serialisation functions for GNetworkAddress, GSocketAddress,
GUnixSocketAddress, GInetSocketAddress, GNetworkService and
GSocketConnectable. These are intended for use in debug output, not for
serialisation in network or disc protocols.
They are implemented as a new virtual method on GSocketConnectable:
g_socket_connectable_to_string().
GInetSocketAddress and GUnixSocketAddress now implement
GSocketConnectable directly to implement to_string(). Previously they
implemented it via their abstract parent class, GSocketAddress.
https://bugzilla.gnome.org/show_bug.cgi?id=737116
GDatagramBased is an interface abstracting datagram-based communications
in the style of the Berkeley sockets API. It may be contrasted to (for
example) GIOStream, which supports only streaming I/O.
GDatagramBased allows socket-like communications to be done through any
object, not just a concrete GSocket (which wraps socket()).
This adds the GDatagramBased interface, and implements it in GSocket.
https://bugzilla.gnome.org/show_bug.cgi?id=697907
When G_OUTPUT_STREAM_CLOSE_TARGET is set,
g_output_stream_real_splice was not returning -1 in any error
cases, since the success flag was being overwritten.
https://bugzilla.gnome.org/show_bug.cgi?id=756255
The environment variable DISPLAY makes sense only for X11, it should
not be set in gio.
Beside, if the backend is not X11 but Wayland, forcing the value of
DISPLAY to the Wayland display will confuse the backend selection and
possibly crash the applications.
https://bugzilla.gnome.org/show_bug.cgi?id=754983
Commit a0cefc2217 introduced an unresolved
symbol, g_socket_send_message_with_timeout(), on win32. Windows
unfortunately isn’t clever enough to fill in the gaps and magic up the
implementation of that function from nowhere, so we had better do it
ourselves.
Factor the blocking behaviour out of g_socket_send_message() into a new
internal g_socket_send_message_with_timeout().
https://bugzilla.gnome.org/show_bug.cgi?id=756054
5d68947 factored out resuable items, but some of these are only for
*NIX builds, which will break the build on Windows. Fix this by
building these portions only when !G_OS_WIN32.
https://bugzilla.gnome.org/show_bug.cgi?id=756053
The value of g_socket_is_connected() gets stuck high if the GSocket is
shut down in two steps:
g_socket_shutdown (socket, TRUE, FALSE, NULL);
g_socket_shutdown (socket, FALSE, TRUE, NULL);
rather than one:
g_socket_shutdown (socket, TRUE, TRUE, NULL);
Fix that by tracking the connected status for the read half and the
write half of the connection separately.
https://bugzilla.gnome.org/show_bug.cgi?id=697907
set_auth_msg() was returning FALSE to indicate error, but all its
callers were expecting a negative return value to indicate error. This
was causing memory leaks for the GError, and errors to not be reported.
Coverity CID: 1325357
If the certificate constructor is called as:
g_tls_certificate_new_from_pem (data, length, NULL);
and PEM parsing fails for the private key, the function would have
continued to try and create a certificate using a NULL key_pem value,
which would have failed or crashed.
Use g_propagate_error() correctly to avoid this.
Coverity CID: 1325403
If an error in the underlying sendmmsg() syscall occurs after
successfully sending one or more messages, g_socket_send_messages()
should return the number of messages successfully sent, rather than an
error. This mirrors the documented sendmmsg() behaviour.
This is a slight behaviour change for g_socket_send_messages(), but as
it relaxes the error reporting (reporting errors in fewer situations
than before), it should not cause problems.
https://bugzilla.gnome.org/show_bug.cgi?id=751924
Add support for receiving multiple messages with a single system call,
using recvmmsg() if available. Otherwise, fall back to looping over
g_socket_receive_message().
This adds new API, g_socket_receive_messages(), and corresponding unit
tests.
https://bugzilla.gnome.org/show_bug.cgi?id=751924
In order to support per-operation timeouts on new API like
g_socket_receive_messages(), the internal GSocket API should use
timeouts rather than boolean blocking parameters.
(timeout == 0) === (blocking == FALSE)
(timeout == -1) === (blocking == TRUE)
(timeout > 0) === new behaviour
https://bugzilla.gnome.org/show_bug.cgi?id=751924
This complements the GOutputMessage struct. It will shortly be used for
adding a g_socket_receive_messages() function, but needs to be committed
first to allow some internal refactoring of GSocket.
https://bugzilla.gnome.org/show_bug.cgi?id=751924
Previously, GLib returned text/plain for empty files.
This is important because people may want to open empty (eg:
just-created) text files with the text editor.
An unintended side-effect of b6fc1df022
caused GLib to start returning application/octet-stream instead of
text/plain for these files.
This commit is essentially a revert of that commit, with a different
solution: we move the special-case up a bit in the function and
hard-code it to text/plain.
This change does not exactly maintain the old behaviour: previously, a
"fast" lookup would have returned application/octet-stream on an empty
file and now it will return text/plain. I consider this to be an
improvement (since we're returning better data) and don't expect it to
cause problems.
https://bugzilla.gnome.org/show_bug.cgi?id=755795
The API design here is a bit awkward — the in/out flags argument should
actually have been an in flags argument and an out msg_flags argument.
Clarify that a bit in the documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=751924
_wstat32i64() doesn't exist in msvcrt.dll. This doesn't cause a problem
on 32-bit Windows because mingw-w64 #defines _wstat32i64 to _wstati64,
but on 64-bit Windows we get a link error.
In addition, _wstat32i64() takes a struct _stat32i64 *, but
GLocalFileStat is #defined to struct _stati64, which is not the same
type on 64-bit Windows.
Fix by using _wstati64().
https://bugzilla.gnome.org/show_bug.cgi?id=749161
Make use of the common autotools module that is used to generate the MSVC
project files from their respective templates so that the main build files
beccome cleaner, and enhance them in a way that the headers that should be
installed can be written to the property sheets during 'make dist', so that
the chances of missing headers for MSVC builds can be greatly reduced.
Also use this autotools module to fill in the projects for
glib-compile-schemas and glib-compile-resources.
https://bugzilla.gnome.org/show_bug.cgi?id=735429
We don't need to run binaries we just built in order to successfully
build GLib and friends any more.
Since commit b74e2a7, we don't need to run glib-genmarshal when building
GIO; since commit f9eb9eed, all our tests (including the ones that do
need to run binaries we just built) are only built when running "make
check", instead of unconditionally at every build.
This means that we don't need to check for existing, native binaries
when cross-compiling, and fail the configuration step if they are not
found — which also means that you don't need to natively build GLib for
your toolchain, in order to cross-compile GLib.
We can also use the cross-compilation conditional, and skip those tests
that require a binary we just built in order to build.
https://bugzilla.gnome.org/show_bug.cgi?id=753745
GListStore already has a g_list_store_insert_sorted function,
which can be used to keep the list sorted according to a fixed
sort function. But if the sort function changes (as e.g. with
sort columns in a list UI), the entire list needs to be
resorted. In that case, you want g_list_store_sort().
https://bugzilla.gnome.org/show_bug.cgi?id=754152
Enhance GTestTlsBackend to allow setting the issuer property of
GTlsCertificates, and add a test to ensure certificate chain
construction with g_tls_certificate_new_from_pem() works as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=754264
If a private key (or anything, in fact) follows the final certificate in
the file, certificate parsing will be aborted and only the first
certificate in the chain will be returned, with the private key not set.
Be tolerant of this, rather than expecting the final character in the
file to be the newline following the last certificate.
https://bugzilla.gnome.org/show_bug.cgi?id=754264
If @error is NULL then we don't even need to evaluate the remaining
arguments. And if errno is EWOULDBLOCK, then no one should see the
error message anyway, so don't bother g_strdup_printf'ing up a pretty
one.
https://bugzilla.gnome.org/show_bug.cgi?id=752769
If you called g_dbus_connection_remove_filter() on a filter while it
was running (or about to be run) in another thread, its GDestroyNotify
would be run immediately, potentially causing the filter thread to
crash.
Fix this by refcounting the filters, and using the existing mechanism
for running a GDestroyNotify in another thread in the case where the
the gdbus thread is the one that frees it.
Also, add a bit of documentation explaining this (and add a related
clarification to g_dbus_connection_signal_subscribe()).
https://bugzilla.gnome.org/show_bug.cgi?id=704568
This will prevent attempting to read from some files that appear normal but are
really device-like, such as those in /proc and /sys.
If we can't stat() the file then don't bother attempting to sniff, either.
https://bugzilla.gnome.org/show_bug.cgi?id=708525
FreeBSD and NetBSD have field st_birthtim and st_birthtime in struct stat,
respectively, which can be used to get file creation time on supported file
systems such as UFS2 and tmpfs.
https://bugzilla.gnome.org/show_bug.cgi?id=749492
gvfs commit b358ca "Make sure metadata is always returned by
query_writable_namespaces()" changed the
query_writable_namespaces vfunc to never return NULL, but the error
checking in g_daemon_file_query_writable_namespaces still assumes vfunc
failure implies NULL return value and GError set. This causes a memory
leak as on failure the GError will be set but the vfunc implementation
will have created its own default list so NULL will not be returned, and
the GError will never be cleared.
This commit directly checks if the GError is set to detect failures,
my_error is directly dereferenced in the error block anyway.
This also removes an unneeded call to g_file_attribute_info_new(); as
the vfunc always returns us a non-NULL GFileAttributeInfoList.
https://bugzilla.gnome.org/show_bug.cgi?id=747364
These tests clear up a misunderstanding of mine: Monitoring
nonexisting files and directories *does* work with the inotify
implementation, it just has a very long timeout for scanning
for missing locations, so the test needs to take that into
account.
This is meant for opaque, non-POSIX-like backends to indicate that the
URI is not persistent. Applications should look at
G_FILE_ATTRIBUTE_STANDARD_SYMLINK_TARGET for the persistent URI.
Examples of such backends could be a portal for letting sandboxed
applications access the file-system, or a database-backed storage like
Google Drive.
In these cases, the user visible file and folder names are different
from the real identifiers, used by the backend. So, a request to
create google-drive://user@gmail.com/foo/New\ File, would actually
lead to google-drive://user@gmail.com/foo/bar on the server even though
the user visible name is still "New File". Since the server-defined URI
is persistent and sanity-checked by the backend, it is recommended that
applications switch to it as soon as possible. Backends will try to
keep a mapping from "fake" to "real" URIs, but those are only on a
best effort basis. They might not be persistent or have the same
guarantees as the "real" URIs.
https://bugzilla.gnome.org/show_bug.cgi?id=741602
g_dbus_method_invocation_return_value(), etc, don't have GError
parameters (which makes sense since they won't usually return errors,
and there's not much you could do if they did), so in the rare case
when something does go wrong, they print a warning.
However, there is at least one situation where the warning is a bad
idea: if you are using private bus connections, and a client connects,
makes a request, and then disconnects before getting the response.
Given that there's nothing the caller can do to prevent this case from
getting hit (since the client might not disconnect until after the
call to g_dbus_method_invocation_return_value() starts) and given that
the server can never actually know for sure that the client has
received the response (it might disconnect after reading the response,
but before processing it), just kill the warning in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=753839
Add a new test which checks that atomically replacing a file that
is being monitored by GFileMonitor produced the expected events.
The test can easily be expanded to cover other file monitoring
scenarios.
After the big file monitoring rewrite, we only put the IN_MOVED_FROM event
in the queue for such pairs. It matches INOTIFY_DIR_MASK and thus we call
ip_dispatch_event on it, but that function was filtering it out because
the filename in the 'from' event is the one of the temp file, not the
one we are monitoring. That name is in the 'to' event, so compare it as
well, and let the event passin that case.
There is another instance of this check in glocalfilemonitor.c, which is
corrected here as well.
https://bugzilla.gnome.org/show_bug.cgi?id=751358
This is a binding-friendly version of g_dbus_connection_register_object.
Based on a patch by Martin Pitt and the code of g_bus_watch_name_with_closures.
https://bugzilla.gnome.org/show_bug.cgi?id=656325
exit-on-close for a DBus connection is a completely normal thing. On
a regular GNOME login, gdm retains the X server, but terminates the
session login bus and associated helpers like gnome-settings-dameon,
the a11y tools, etc.
I've seen several downstream reports of confusion as to what these
apparent error messages mean in the system log. It doesn't help
that they're so obtuse.
We're also printing them to stderr, when this is not an error.
The reason this was introduced is presumably some people were confused
as to why their process exited when the system bus did. But the
solution for that I believe is documentation, not printing stuff to
everyone's system log in normal operation.
https://bugzilla.gnome.org/show_bug.cgi?id=742386
The previous commit introduced a possible memory leak in cases
where we get a G_IO_ERROR_CLOSED error. Make sure to always
free an error, if we got one.
https://bugzilla.gnome.org/show_bug.cgi?id=753278
There are real world cases where emitting signals can fail, such
as if the DBus connection closes. Asserting and aborting the process
in these cases is just plain lazy.
Ignore the errors when the connection is closed, and turn the
others into warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=753278
Add a property to GNetworkMonitor indicating if the network
is metered, e.g. subject to limitations set by service providers.
The default value is FALSE
https://bugzilla.gnome.org/show_bug.cgi?id=750282
A signal accumulator can return TRUE to continue signal emission, and
FALSE to stop signal emission. handle-local-options callbacks can return
« return a non-negative option if you have handled your options and
want to exit the process ».
Currently, g_application_handle_local_options_accumulator (the
accumulator for the handle-local-options signal) returns TRUE on
non-negative return value (ie continue signal emission), and returns
FALSE on negative return values (ie when the default option processing
should continue).
This return value seems backward as on >= 0 values, subsequent
handle-local-options callbacks could overwrite the 'exit request' from
the handler, while on < 0 values, the handle-local-options processing
could end up early if several callbacks are listening for this signal.
In particular, the default handler for this signal
(g_application_real_handle_local_options) always returns -1 and will
overwrite >= 0 return values from other handlers.
This commit inverts the check so that signal emission stops early when
one of the handle-local-options callbacks indicates it wants processing
to stop and the process to exit.
https://bugzilla.gnome.org/show_bug.cgi?id=751598
We already have start, stop and is_active methods, but turning it
into a real property is useful for a few reasons:
- it allows us to bind the property to an UI or a setting
- it allows us to get notified when the state changes
- it allows us to instantiate objects directly in the stopped state
https://bugzilla.gnome.org/show_bug.cgi?id=752089
Also add g_app_info_get_fallback_for_type() and
g_app_info_get_recommended_for_type() as proxies for
g_app_info_get_all_for_type(), until gcontenttype support is improved.
This code was out of date with current coding practices.
Nowadays it's common to receive file descriptors over environment
variables from other processes like systemd. The unit files that
control these file descriptors are configurable by sysadmins.
It is not (necessarily) a programmer error when g_socket_details_from_fd()
is called with a file descriptor that is not a socket. It can also
be a system and/or configuration error.
https://bugzilla.gnome.org/show_bug.cgi?id=746339
In 4e7d22e268, deleting the file was moved
after the assertion which checks for the changed event that results from
it being deleted. This is the wrong way around and makes the assertion
fail.
Move the deletion back up before we check the condition. delete_app is
no longer an idle callback so it can be made void. The change
notification might come in when the loop isn't running now, so don't try
to quit if it isn't running. In this case we'll wait for the three
second timeout and the test will still pass.
https://bugzilla.gnome.org/show_bug.cgi?id=751737
When a task is cancelled, we want to move it to the front
of the queue - our sort function does that for us, but there
is no need to resort the entire queue here, we can just
move the one item and be done with it. This uses just-introduced
threadpool api for this purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=751160
Make sure to initialize the notification backend in
g_application_withdraw_notification() the same way as is done in
g_application_send_notification().
This makes it possible for an app to withdraw notifications it has sent
in a previous execution of the application.
https://bugzilla.gnome.org/show_bug.cgi?id=750625
We need to be more careful when we try to assign values to gpointers, so
that means we have to assign the value to the properly-dereference
gpointer, so that the assigned value will be retained after the function
returns. This code will be dropped soon, but it is done for XP
compatibility's sake for 2.44.
Should fix the issue reported in bug 730352 comment #24.
For performance reasons we should always try to send or
receive our messages first and only wait for more space
or data to become available if we get an EAGAIN (and
are in blocking mode).
https://bugzilla.gnome.org/show_bug.cgi?id=751122
This can be handy when you want to change the sense of a toggle
in the UI without rewriting the underlying logic. Currently, this
is just exposed as a construct-only property. We may add a
convenience wrapper or a special !property syntax for this later.
https://bugzilla.gnome.org/show_bug.cgi?id=728489
This is the right thing to do for the "a session is a user-session"
model implemented in dbus 1.9.14, which is described in
<http://lists.freedesktop.org/archives/dbus/2015-January/016522.html>.
It also resembles sd-bus' behaviour, although sd-bus will only try
kdbus and XDG_RUNTIME_DIR/bus, and never runs dbus-launch.
On systems following the more traditional "a session is a login-session"
model, X_R_D/bus won't exist, so it is harmless to check for it before
falling back to X11 autolaunching. Again, this matches the behaviour
of current libdbus and sd-bus versions.
Now that we do this, g_test_dbus_unset() needs to clear XDG_RUNTIME_DIR
as well as everything else.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=747941
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
This only alters what happens if we specifically connect to
"autolaunch:", for instance via "DBUS_SESSION_BUS_ADDRESS=autolaunch:".
We will still potentially try other platform-specific things if
DBUS_SESSION_BUS_ADDRESS is unset. There are currently no other
platform-specific things, so there is no practical difference yet,
but I'm about to add a more-preferred fallback path before autolaunch.
This matches libdbus' behaviour and the D-Bus Specification, in which
the autolaunch: transport specifically means X11 autolaunch
(as implemented by "dbus-launch --autolaunch") on Unix, or a
shared-memory-based protocol on Windows. Other platform-specific
transports or default/fallback modes, including launchd on Mac OS X
and XDG_RUNTIME_DIR/bus on Unix, are not part of "autolaunch:".
It's rather unfortunate that the same name means two different
platform-specific mechanisms, specific to different platforms -
if they were added today I'd call them x11: and windows-shm: or
something - but it's been like this since 2007 so it's too late now.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=747941
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Currently, applications using g_application_add_main_option_entries()
won't get translated entries in --help output. We need to call
g_option_group_set_translation_domain() with a NULL domain to ensure that the
default application gettext domain (ie the one passed to the
textdomain() call) will be used for the main entries passed by the
application.
If we want to allow more flexibility on which gettext domain should be
used for these entries, new API will be needed.
https://bugzilla.gnome.org/show_bug.cgi?id=750322
Add a new section to the main GSettings documentation which documents
the best practices for integrating GSettings into an autoconf/automake
build system using the GLIB_GSETTINGS macro.
Some of this material was adapted from the migrating-gconf.xml guide.
https://bugzilla.gnome.org/show_bug.cgi?id=741788
* Only check __OBJECT_ATTRIBUTES_DEFINED and __UNICODE_STRING_DEFINED
on MinGW (MSVC doesn't have these)
* MSVC: disable:4005 when including windows.h and ntstatus.h
* Move NTAPI cconv into the parens with the NtQueryKeyFunc
* Fix return values in some functions
https://bugzilla.gnome.org/show_bug.cgi?id=734888
- On first call scan the registry, collect information about URI protocols,
file extensions, applications and handlers, store that as a set of
interconnected structures in several hash tables
- Watch the registry keys, re-scan the registry when any one of them changes.
https://bugzilla.gnome.org/show_bug.cgi?id=666831
Use the newly added g_settings_schema_list_keys() API instead of
g_settings_list_keys() in order to list keys.
Doing this allows the 'list-keys' command to work without creating a
GSettings object, which is more efficient. It also means that we don't
have to provide a (meaningless and ignored) path when listing keys on
relocatable schemas.
While we're at it, update the 'range' command not to require creation of
a GSettings object, in a similar way.
https://bugzilla.gnome.org/show_bug.cgi?id=740308
The list of keys in a GSettings object depends entirely on the schema,
so it makes sense to expose this API there.
Move the implementation out of gsettings.c and into gsettingsschema.c,
replacing the earlier with a simple call to the new location.
We don't do the same for children because the children can change.
https://bugzilla.gnome.org/show_bug.cgi?id=740308
Cancellation of GPollFileMonitor is now handled correctly (in the sense
that no further signals will follow) but let's be extra paranoid and
disconnect our handler anyway, for good measure.
https://bugzilla.gnome.org/show_bug.cgi?id=739424
GPollFileMonitor emits CHANGES_DONE_HINT after CHANGED signals, but it
doesn't check to ensure that the file monitor wasn't cancelled before it
does that.
If the original signal caused the monitor to be unreffed, cancelled and
destroyed, we would still end up emitting an extra signal on it.
Avoid that by checking first for cancellation.
https://bugzilla.gnome.org/show_bug.cgi?id=739424
Removed all mentions of GLib file name encoding referring to
the environment strings. The env var content has no defined relation
to GLib's notion of filename encoding, or any encoding whatsoever.
It would be wrong to pass all UTF-8 strings through
g_filename_from_utf8() in order to put them into the environment,
for one thing.
https://bugzilla.gnome.org/show_bug.cgi?id=738185
DBus has recently introduced new message flag
DBUS_HEADER_FLAG_ALLOW_INTERACTIVE_AUTHORIZATION, which tells that
caller is willing to wait for unspecified amount of time for the call
to return, as the service may perform interactive authorization (e.g.
using polkit).
https://bugzilla.gnome.org/show_bug.cgi?id=739616
In order to maintain a logical stream of events, we need to make sure we
flush and queued change notifications before responding to any requests
for information from clients.
If we don't do this, it's possible that we emit an 'add' event that was
queued at the time of a 'DescribeAll' call _after_ the reply to that
call (which already contained the description of the new action).
In practice, this is not only logically incorrect, but it can also cause
problems. If a change to action 'state' or 'enabled' occurs after the
DescribeAll but before the signal has been dispatched, it will be
ignored because an 'add' signal is already pending. When that add
signal is sent, it will contain the correct data, but the receiver will
ignore it because it already saw the action in the DescribeAll reply.
https://bugzilla.gnome.org/show_bug.cgi?id=749693
This is a hack for GLocalFileInfo to correctly get icons for directories.
Without this change content type for any W32 directory is NULL
(because there's no registry entry for "inode/directory" by default,
and in any way there's no file extension that means "directory" to put there),
and GLocalFileInfo uses content type to grab icons.
https://bugzilla.gnome.org/show_bug.cgi?id=748727
The code here was returning gtk-directory and similar names as
fallback, with a comment claiming that these are 'builtin gtk'.
But they aren't, anymore, so just return the standard names.
This code used to look at the SCM_CREDENTIALS and ignore every message
not from uid 0. However, when user namespaces are in use this does not
work, as if uid 0 is not mapped you get overflowuid instead. Right now
this means we ignore all messages in such user namespaces and glib
apps hang on startup.
We can't look at pids either, as pid 0 is returned for processes
outside your pid namespace.
Instead the correct approach is to look at the sending sockaddr and
if the port id (nl_pid) is zero, then its from the kernel.
Source:
http://lists.linuxfoundation.org/pipermail/containers/2015-May/036032.htmlhttps://bugzilla.gnome.org/show_bug.cgi?id=750203
Instead of just dropping address types that we're not specifically
handling we return a GNativeSocketAddress which is just a dummy
container for the stuct sockaddr.
https://bugzilla.gnome.org/show_bug.cgi?id=750203
GListStore requires that item-type be derived from GObject, so specify
that the type of the item parameters is GObject so the functions can be
used via gobject-introspection.
Add a scope parameter for the callback used during insert_sorted.
Previously, we waited up to 0.5s, but that can fail on slow
architectures like ARM; now we wait up to 60s in 0.1s increments.
Patch originally by Simon McVittie <simon.mcvittie@collabora.co.uk>,
modified by Iain Lane to be called earlier, to catch all testcases in a
particular test.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=724113
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Acked-by: Matthias Clasen <mclasen@redhat.com>
We previously waited 0.25s, which should be enough even on slow machines,
but you never know; but we also now wait in 0.1s increments, so this test
should actually be faster now.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=724113
Acked-by: Matthias Clasen <mclasen@redhat.com>
I searched all files that mention g_test_run, and replaced most
g_print() calls. This avoids interfering with TAP. Exceptions:
* gio/tests/network-monitor: a manual mode that is run by
"./network-monitor --watch" is unaffected
* glib/gtester.c: not a test
* glib/gtestutils.c: not a test
* glib/tests/logging.c: specifically exercising g_print()
* glib/tests/markup-parse.c: a manual mode that is run by
"./markup-parse --cdata-as-text" is unaffected
* glib/tests/testing.c: specifically exercising capture of stdout
in subprocesses
* glib/tests/utils.c: captures a subprocess's stdout
* glib/tests/testglib.c: exercises an assertion failure in g_print()
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
This stops it from interfering with structured stdout such as TAP.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
This avoids any possibility of interfering with test syntax (such as
TAP) on stdout. TAP specifically does not parse stderr.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
When running the nonce-tcp and tcp-anonymous tests in one run
of gdbus-peer, or running one of them twice via command-line options
"-p /gdbus/tcp-anonymous -p /gdbus/tcp-anonymous", the one run second
would sometimes fail to connect with ECONNRESET.
Adding more debug messages revealed that in the successful case,
g_main_loop_run() was executed in the server thread first:
# tcp-anonymous: server thread: listening on tcp:host=localhost,port=53517
# tcp-anonymous: server thread: starting server...
# tcp-anonymous: server thread: creating main loop...
# tcp-anonymous: server thread: running main loop...
# tcp-anonymous: main thread: trying tcp:host=localhost,port=53517...
# tcp-anonymous: main thread: waiting for server thread...
but in the failing case, the main thread attempted to connect
before the call to g_main_loop_run() in the server thread:
# tcp-anonymous: server thread: listening on tcp:host=localhost,port=40659
# tcp-anonymous: server thread: starting server...
# tcp-anonymous: server thread: creating main loop...
# tcp-anonymous: main thread: trying tcp:host=localhost,port=40659...
# tcp-anonymous: server thread: running main loop...
(The log message "creating main loop" was immediately before
create_service_loop(), and "running main loop" was immediately
before g_main_loop_run().)
To ensure that the GDBusServer has a chance to start accepting
connections before the main thread tries to connect to it, do not
tell the main thread about the service_loop immediately, but instead
defer it to an idle.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=749079
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
This test originally did not connect to the bus, which meant it was
omitted from commits like 415a8d81 that made sure none of GLib tests
rely on the presence of an existing session bus. (In particular,
Debian autobuilders don't have a session bus.)
When test_double_array() was added, environments like the Debian
autobuilders didn't catch the fact that this test relied on having a
session bus, because it is often skipped in minimal environments
due to its libdbus-1 dependency.
We don't actually need to connect to a dbus-daemon here: it's enough
to convert the message from GVariant to D-Bus serialization, and
back into an in-memory representation through libdbus. That's what
check_serialization() does, and I've verified that when I re-introduce
bug #732754 by reverting commits 627b49b and 2268628 locally, this
test still fails.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=744895
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Colin Walters <walters@verbum.org>
The changed variable was previously uninitialised in the path where the
rate limit was actually changed. This could result in the
GObject::notify signal not getting emitted.
Spotted by Coverity.
CID: #1296516https://bugzilla.gnome.org/show_bug.cgi?id=748834
The third parameter of the thumnail_verify() function had been updated to
const GLocalFileStat, so update the thumbnail-verification test likewise
so that the test works properly on all supported platforms.
https://bugzilla.gnome.org/show_bug.cgi?id=711547
Always run the full algorithm for a given mime type before considering
fallback types.
This includes considering installed applications capable of handling a
particular mimetype, even if such an app is not explicitly marked as
default, and there is a default app for a less-specific type.
Specifically, this often helps with cases of installing apps that can
handle a particular subtype of text/plain. We want to take those apps
in preference to a generic text editor, even if that editor is listed as
the default for text/plain and there is no default listed for the more
specific type.
Because of the more holistic approach taken by the algorithm, it is now
more complicated, but it also means that we can do more work while
holding the lock. In turn, that lets us avoid duplicating some strings,
which is nice.
https://bugzilla.gnome.org/show_bug.cgi?id=744282
If g_dbus_message_to_blob() fails at all, it will leak its mbuf. Spotted
by running the gdbus-serialization test under Valgrind — so there is a
justification for leak-free tests after all!
In path_rule_matches(), the given paths may be of 0-length. Do not
access memory before the array in those case. This is for example
triggered by:
test_match_rule (con, G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH, "/", "", FALSE);
in test_connection_signal_match_rules().
This bug was found thanks to GCC AddressSanitizer.
https://bugzilla.gnome.org/show_bug.cgi?id=745745
Passing an nonsense string for the --dest argument can lead
to a segfault of gdbus. Thats not nice, so use our existing
validation function for bus names here.
https://bugzilla.gnome.org/show_bug.cgi?id=747541
Make sure error handling on repeated <summary> and <description> is
being done properly, not resulting in glib-compile-schemas throwing a
critical.
https://bugzilla.gnome.org/show_bug.cgi?id=747542
Fix a couple of issues in error handling in glib-compile-schemas.
The first problem is that, in case of repeated <summary> or
<description> tags we were still allocating a GString which was never
being freed (due to the throwing of the error resulting in immediate
termination of the parse).
The second problem is that if the repeated <summary> tag also had
attributes, we would attempt to set the GError twice.
https://bugzilla.gnome.org/show_bug.cgi?id=747542
Bug 747209 introduced an error when multiple <summary> or <description>
tags are found for a single key in a GSettings schema. This check
should have been present from the start, but it was left out because the
schema compiler doesn't include these items in the cache file. Even
still -- part of the schema compiler's job is validation, and it should
be enforcing proper syntax here.
Repeated <summary> and <description> tags are a semi-common problem when
intltool has been misconfigured in the build system of a package, but
it's possible to imagine mistakes being made by hand as well.
The idea is that these problems would be caught during the build of a
package and maintainers would be forced to fix their build systems.
An unintended side-effect of this change, however, is that the schema
compiler started ignoring already-installed schemas that contained these
problems, when rebuilding the cache. This means that the installation
of _any_ application would cause the regeneration of the entire cache,
with these already-installed applications being excluded. Without the
schema in the cache, the application would crash on next startup.
The validation check in the gsettings m4 macro passes --strict to the
compiler, which is not used when rebuilding the cache after
installation. Pass this flag down into the parser and only throw the
error in case --strict was given. This will result in the (desired)
build failure without also causing already-installed apps to stop
functioning.
This means that we will not get even a warning about the invalid schema
file in the already-installed case, but that's fine. There is no sense
spamming the user with these messages when they are already quite fatal
for the developer at build time.
https://bugzilla.gnome.org/show_bug.cgi?id=747472
Commit f10b655 removed the inclusion of gasyncresult.h from gdbusproxy.c,
but gdbusproxy.c uses g_async_result_get_source_object(), which caused a
build warning/error. Fix that.
The gdbus GTask port introduced a deadlock because some code had been
using g_simple_async_result_complete_in_idle() to ensure that the
callback didn't run until after a mutex was unlocked, but in the gtask
version, the callback was being run immediately. Fix it to drop the
mutex before calling g_task_return*(). Also, tweak
tests/gdbus-connection to test this.
https://bugzilla.gnome.org/show_bug.cgi?id=747349
Add support for copying session data between client connections.
This is needed for implementing FTP over SSL. Most servers use a separate
session for each control connection and enforce sharing of each control
connection's session between the related data connection.
Copying session data between two connections is needed for two reasons:
1) The data connection runs on a separate port and so has a different
server_identity which means it would not normally share the session with
the control connection using the session caching currently implemented.
2) It is typical to have multiple control connections, each of which
uses a different session with the same server_identity, so only one of
these sessions gets stored in the cache. If a data connection is opened,
(ignoring the port issue) it may try and reuse the wrong control
connection's session, and fail.
This operation is conceptually the same as OpenSSL's SSL_copy_session_id
operation.
https://bugzilla.gnome.org/show_bug.cgi?id=745255
This allows the caller to know when a socket has been bound so that
it can for instance set the SO_SENDBUF and SO_RECVBUF socket options
before listen is called
https://bugzilla.gnome.org/show_bug.cgi?id=738207
GTask used a 10-thread thread pool for g_task_run_in_thread() /
g_task_run_in_thread_sync(), but this ran into problems when task
threads blocked waiting for another g_task_run_in_thread_sync()
operation to complete. Previously there was a workaround for this, by
bumping up the thread limit when that case was detected, but deadlocks
could still happen if there were non-GTask threads involved. (Eg, task
A sends a message to thread X and waits for a response, but thread X
needs to complete task B in a thread before returning the response to
task A.)
So, allow GTask's thread pool to be expanded dynamically, by watching
it from the glib worker thread, and growing it (at an
exponentially-decreasing rate) if too much time passes without any
tasks completing. This should solve the deadlocking problems without
causing sudden breakage in apps that assume they can queue huge
numbers of tasks at once without consequences.
https://bugzilla.gnome.org/show_bug.cgi?id=687223
This schema compiler was completely ignoring <summary> and
<description> tags. Unfortunately, there are modules out there
who merge translations for these back in, with xml:lang. And
this is giving dconf-editor a hard time. Since this is not
how translations of schemas are meant to be done, just
reject such schema files.
Also add tests exercising the new error handling.
https://bugzilla.gnome.org/show_bug.cgi?id=747209
glib-compile-resources was guessing a filename ending
in .c when generating sources, but did not do the same
for headers. Fix it so it generates a .h file when
guessing the filename for headers.
https://bugzilla.gnome.org/show_bug.cgi?id=746753
The hash table stores the list of unmatched IN_MOVE_FROM events, but we
were removing entries from it when popping IN_MOVE_TO events.
Fix that up to correct a crash in nautilus due to the assertion failure
below.
https://bugzilla.gnome.org/show_bug.cgi?id=746749
Due to a typo, a rename reported via a pair of delete/create events (due
to the watcher not giving the flag for moves to be paired) was
accidentally reported as being created with the old name instead of the
new name.
Fix that.
We declare the typedefs for GListModel and GListStore in giotypes.h, as
a matter of convention. This is not actually required, since the
typedef is emitted as part of the G_DECLARE_* macros.
The giotypes.h approach is only used to avoid cyclic dependencies
between headers, which is not a problem in this case.
Type redefinition is a C11 feature, and although it was around in some
compilers before then, gcc 4.2.1 (from 2007) is apparently still in wide
use, being the default compiler for OpenBSD.
Eventually, we will probably hit a case where we actually need to
redefine a type, but since we're not there yet, let's back off a bit.
This WIP patch moves the Windows Directory Monitoring code to the new
GLocalFileMonitor mechanism, and adds file monitoring in the process.
Progress from previous patch:
-File renames are now properly supported, but G_FILE_MONITOR_EVENT_MOVED_IN
and G_FILE_MONITOR_EVENT_MOVED_OUT needs to be investigated, as
ReadDirectoryChangesW() seems to send FILE_ACTION_REMOVED when a file is
moved out of a directory.
-Events are handled for both the long and short (8.3) variants of the
filenames, and files monitored will report changes when it is changed
via its short or long filenames.
Things to be done:
-Perhaps find out about attribute changes in files in a monitored
directory; if a file is monitored, attribute changes are correctly
handled.
-Investigate on G_FILE_MONITOR_EVENT_MOVED_OUT,
G_FILE_MONITOR_EVENT_MOVED_IN, G_FILE_MONITOR_EVENT_PRE_UNMOUNT,
G_FILE_MONITOR_EVENT_UNMOUNTED.
-Investigate on the "boredom" algoritm, and see how we can do it on
Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=730116
Completely rewrite the FAM file monitor. Major changes:
- now runs in the worker thread
- dispatches events in a threadsafe way via GFileMonitorSource
- uses unix fd source instead of a GIOChannel
- is now simple enough to fit into one short file
This is the bare minimal effort. This seems not to crash immediately,
but it definitely needs some better testing.
The backend is not in good shape. It could use some serious work.
Use the "interesting" value from g_file_monitor_source_handle_event() to
decide if we're currently being flooded by a stream of boring events.
The main case here is when one or more files is being written to and the
change events are all being rate-limited in the GFileMonitor frontends.
In that case, we become "bored" with the event stream and add a backoff
timeout. In the case that it is exactly one large file being written
(which is the common case) then leaving the event in the queue also lets
the kernel perform merging on it, so when we wake up, we will only see
the one event. Even in the case that the kernel is unable to perform
merging, the context switch overhead will be vastly reduced.
In testing, this cuts down on the number of wake ups during a large file
copy, by a couple orders of magnitude (ie: less than 1% of the number of
wake ups).
Return an "interesting" boolean from the event handler function on
GFileMonitorSource.
An event was "interesting" if it will result in a signal actually being
dispatched to the user. It is "uninteresting" if it only hit an
already-dirty rate limiter.
We will use this information to do some backing off in the backends when
faced with a flood of uninteresting events.
We generally assume that an IN_CREATE event is the start of a series of
events in which another process is doing this:
fd = creat (...) -> IN_CREATE
write (fd, ..) -> IN_MODIFY
write (fd, ..) -> IN_MODIFY
close (fd) -> IN_CLOSE_WRITE
and as such, we use the CHANGES_DONE_HINT event after CREATED in order
to show when this sequence of events has completed (ie: when we receive
IN_CLOSE_WRITE when the user closes the file).
Renaming a file into place is handled by IN_MOVED_FROM so we don't have
to worry about that.
There are many other cases, however, where a new file 'appears' in a
directory in its completed form already, and the kernel reports
IN_CREATE. Examples include mkdir, mknod, and the creation of
hardlinks. In these cases, there is no corresponding IN_CLOSE_WRITE
event and the CHANGES_DONE_HINT will have to be emitted by an arbitrary
timeout.
Try to detect some of these cases and report CHANGES_DONE_HINT
immediately.
This is not perfect. There are some cases that will not be reliably
detected. An example is if the user makes a hardlink and then
immediately deletes the original (before we can stat the new file).
Another example is if the user creates a file with O_TMPFILE. In both
of these cases, CHANGES_DONE_HINT will still eventually be delivered via
the timeout.
Remove all event merging and dispatch logic from GFileMonitor. The only
implementation of GFileMonitor outside of glib is in gvfs and it already
does these things properly.
Get rid of GLocalDirectoryMonitor. We will use a single class,
GLocalFileMonitor, for both directory and file monitoring. This will
prevent every single backend from having to create two objects
separately (eg: ginotifydirectorymonitor.c and ginotifyfilemonitor.c).
Introduce GFileMonitorSource as a thread-safe cross-context dispatch
mechanism. Put it in GLocalFileMonitor. All backends will be expected
to dispatch via the source and not touch the GFileMonitor object at all
from the worker thread.
Remove all construct properties from GLocalFileMonitor and remove the
"context" construct property from GFileMonitor. All backends must now
get the information about what file to monitor from the ->start() call
which is mandatory to implement.
Remove the implementation of rate limiting in GFileMonitor and add an
implementation in GLocalFileMonitor. gvfs never did anything with this
anyway, but if it wanted to, it would have to implement it for itself.
This was done in order to get the rate_limit field into the
GFileMonitorSource so that it could be safely accessed from the worker
thread.
Expose g_local_file_is_remote() internally for NFS detection.
With the "is_remote" functionality exposed, we can now move all
functions for creating local file monitors to a proper location in
glocalfilemonitor.c
Port the inotify backend to adjust to the changes above. None of the
other backends are ported yet. Those will come in future commits.
Remove the hardwired 1 second event queue logic from inotify-kernel and
replace it with something vastly less complicated.
Events are now reported as soon as is possible instead of after a
delay.
We still must delay IN_MOVED_FROM events in order to look for the
matching IN_MOVED_TO events, and since we want to report events in order
this means that events behind those events can also be delayed. We
limit ourselves, however:
- no more than 100 events can be delayed at a time
- no event can be delayed by more than 10ms
https://bugzilla.gnome.org/show_bug.cgi?id=627285
Add a new internal constructor for GLocalFile (which itself is private).
This new constructor allows creating a GLocalFile from a dirname and a
basename, assuming that the dirname is already in canonical form and the
basename is a regular basename.
This will be used for creating GLocalFile instances from the file
monitoring code (for signal emissions).
For all of the effort spent ensuring that this algorithm would be
correctly threadsafe, I messed up the order of operations within a
single thread when porting to the new approach.
Fix that up.
Also: fix some overzealous asserting in the testcases. Since shutdown
is now lazy, we can never surely say !is_running at any particular point
in time.
This can be used to query whether the task has completed, in the sense
that it has had a result set on it, and has already – or will soon –
invoke its callback function.
Notifications for this property are emitted immediately after the task’s
main callback, in the same main context as that callback. This allows
for multiple bits of code to listen for completion of the GTask, which
opens the door for blocking on cancellation of the GTask and improved
handling of ‘pending’ behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=743636
g_socket_client_add_application_proxy() claimed "When the indicated
proxy protocol is returned by the #GProxyResolver, #GSocketClient will
consider this protocol as supported but will not try to find a #GProxy
instance to handle handshaking." But in fact, it did the checks in the
wrong order, so GProxy proxies ended up overriding
application-specified ones. Fix that.
Also, simplify the code a bit by making use of g_hash_table_add() and
g_hash_table_contains().
https://bugzilla.gnome.org/show_bug.cgi?id=733876
Currently, the Windows code use Winsock2-specific APIs to try to emulate
calls such as inet_pton(), inet_ntop() and if_nametoindex(), which may not
do the job all the time. On Vista and later, Winsock2 does provide a
proper implementation for these functions, so we can use them if they exist
on the system, by querying for them during g_networking_init(). Otherwise,
we continue to use the original code path for these, in the case of XP and
Server 2003.
This enables many of the network-address tests to pass on Windows as a
result, when the native Winsock2 implementations can be used.
https://bugzilla.gnome.org/show_bug.cgi?id=730352
Check the IPv6 addresses on Windows, as we need to reject those that have
brackets/ports around them as valid addresses in this form would have been
accepted during the call to g_inet_address_new_from_string ().
https://bugzilla.gnome.org/show_bug.cgi?id=730352
There was a theoretical deadlock between the worker trying to emit a
signal at the same time as we were waiting for it to shutdown the
notification (while holding the lock).
The deadlock was particularly annoying because we didn't really need to
wait for the shutdown and because it wasn't possible to signals to
arrive while waiting for a start. Attempting to deal with start and
stop in an asymmetric way could have lead to other weird situations,
however.
Drop the lock while waiting for the worker thread to start. This means
that we face the possibility of multiple waiters on the cond at the same
time, so we need to make more of a state machine.
https://bugzilla.gnome.org/show_bug.cgi?id=742599
GUnixMountMonitor was not threadsafe before. It was a global singleton
which emitted signals in the first thread that happened to construct it.
Move it to a per-context singleton model where each GMainContext gets
its own GUnixMountMonitor. Monitor for the changes from the GLib worker
thread and dispatch the results to each context with an active monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=742599
Deprecate g_unix_mount_monitor_set_rate_limit() and turn it into a
no-op.
This function doesn't behave as advertised. It only controls rate
limiting for filesystem-based monitors. It has no impact over reporting
mount changes on Linux, for example, because those are based on polling
for changes in /proc (which doesn't use filesystem monitors). It also
has no impact on Mac OS because a library interface is used there.
This was added in https://bugzilla.gnome.org/show_bug.cgi?id=521946 in
order to be used by HAL, which is effectively dead. udisks no longer
uses this code at all.
https://bugzilla.gnome.org/show_bug.cgi?id=742599
This is a singleton, but we have a function called _new() to get it.
What's worse is that the documentation makes no mention of this, and
actually specifically says that a new monitor will be created each time.
https://bugzilla.gnome.org/show_bug.cgi?id=742599
Add a new internal helper called GContextSpecificGroup.
This is a mechanism for helping to maintain a group of context-specific
monitor objects (eg: GAppInfoMonitor, GUnixMountMonitor).
https://bugzilla.gnome.org/show_bug.cgi?id=742599
If someone explicitly calls g_application_quit() then don't attempt to
drain the mainloop of remaining sources.
This allows applications with 100% CPU utilisation to quit reliably.
https://bugzilla.gnome.org/show_bug.cgi?id=744876
We install win32-software/autorun.exe (as test data for mime scanning)
only on UNIX builds, so don't attempt to chmod it on 'make install'
unless we're on UNIX.
I love Emacs keyboard macros, used them to convert the list of
defines cleverly into a list of tests, then iterated and filled in
the necessary constructor arguments.
After ::shutdown, run the mainloop until all pending activity is
handled, before returning from run().
Among other things, this gives a chance for destroyed windows to be
properly withdrawn from the windowing system.
https://bugzilla.gnome.org/show_bug.cgi?id=744876
This is *significantly* more pleasant to use from C (while handling
errors and memory cleanup).
While we're here, change some ugly, leaky code in
tests/desktop-app-info.c to use it, in addition to a test case
in tests/file.c.
https://bugzilla.gnome.org/show_bug.cgi?id=661554
g_application_bind_busy_property() had the restriction that only one
property can be bound per object, so that NULL could be used to unbind.
Even though this is enough for most uses, it is a weird API.
Lift that restriction and add an explicit unbind function.
https://bugzilla.gnome.org/show_bug.cgi?id=744565
Add an implementation of non-thread-emulated async close of a GIOStream
if either of the underlying stream objects support it.
This prevents us from calling close() functions from another thread on
an object that may not be expecting that. It also allows us to skip the
thread entirely in case our objects support a pure async close.
https://bugzilla.gnome.org/show_bug.cgi?id=741630
Add an internal helper to find out if close_async() is implemented via
threads using the default implementation in the base class.
We will use this to decide if we should do a 'pure async' close of a
GIOStream or not.
https://bugzilla.gnome.org/show_bug.cgi?id=741630
delayed_close_free() calls g_object_unref() on a variable that is
expected to possibly contain NULL (as indicated by the fact that the
NULL case is handled in my_slow_close_output_stream_close_async()).
This is dead code right now (due to a bug in GDBus), which is why it
isn't actually causing a failure. It should still be fixed, however.
https://bugzilla.gnome.org/show_bug.cgi?id=743990
GApplication set the prgname to the application's id when it was running
in service mode. This broke with the addition of new --app-id option,
because g_set_prgname() was called before parsing the options. Calling
it after option parsing doesn't work, because GOptionContext sets
prgname to argv[0] unconditionally.
Instead of changing the semantics of GOptionContext, simply remove this
functionality from GApplication. It is very unusual to have the prgname
set to the app id instead of the binary's name and might confuse people
when looking at logs etc.
When overriding local_command_line() from a subclass,
g_option_context_parse() might never be invokded. Thus, continue setting
the prgname to argv[0] in GApplication.
https://bugzilla.gnome.org/show_bug.cgi?id=743933
Balancing g_application_{un,}mark_busy() is non-trivial in some cases.
Make it a bit more convenient by allowing to bind multiple boolean
properties (from different objects) to the busy state. As long as these
properties are true, the application is marked as busy.
https://bugzilla.gnome.org/show_bug.cgi?id=744565
Add g_list_store_insert_sorted() which takes a GCompareDataFunc to
decide where to insert. This ends up being a very trivial function,
thanks to GSequence.
https://bugzilla.gnome.org/show_bug.cgi?id=743927
Make sure that we only match the _get_type() function name by
restricting the regexp to matching [A-Za-z0-9_]. We were matching on .*
before which means that if we had two _get_type() functions appearing on
a single line then we would get everything in between them included (by
the default rule of '*' being greedy).
This affected G_DECLARE_*_TYPE which puts several uses of _get_type()
into a single line.
GListModel is an interface that represents a dynamic list of GObjects.
Also add GListStore, a simple implementation of GListModel that stores
all objects in memory, using a GSequence.
https://bugzilla.gnome.org/show_bug.cgi?id=729351
Currently the only way to set a state hint on an action is through a
subclass; add a g_simple_action_set_state_hint() method so that this
becomes easier for clients that already use GSimpleAction.
https://bugzilla.gnome.org/show_bug.cgi?id=743521
When implementing blocking operations on top of
nonblocking sockets we should always first try to
perform the operation and then if needed handle
EAGAIN and wait with g_socket_wait_condition.
This is an optimization since we avoid calling
wait condition when it is not needed, but most
importantly this fixes hangs on win32 where some
events (in particular FD_WRITE) are only emitted
after the operation fails with EWOULDBLOCK.
https://bugzilla.gnome.org/show_bug.cgi?id=732439https://bugzilla.gnome.org/show_bug.cgi?id=741707
Add a unit test that checks g_socket_new_from_fd by creating
a gsocket, obtaining its fd, duplicating the fd and then creating
a gsocket from the new fd. This shows a hang on win32 since the
gsocket created from the fd never receives the FD_WRITE event
because we wait for the condition without first trying to write
and windows signals the condition only after a EWOULDBLOCK error.
https://bugzilla.gnome.org/show_bug.cgi?id=741707
We were asking for properties on NM's dbus interface, but if NM is not
running then there won't be any. Check if the name has an owner before
doing anything to it.
https://bugzilla.gnome.org/show_bug.cgi?id=741653
In g_file_make_directory_with_parents(), the my_error variable is used
for several different purposes throughout the whole function, not all of
which are obvious. This explains the situation with some comments.
https://bugzilla.gnome.org/show_bug.cgi?id=719455
Allows sending of multiple messages (packets, datagrams)
in one go using sendmmsg(), thus drastically reducing the
number of syscalls when sending out a lot of data, or when
sending out the same data to multiple recipients.
https://bugzilla.gnome.org/show_bug.cgi?id=719646
Fix two problems:
1) If g_socket_service_stop is called before the accept call is requeued,
then the reference count won't decrease and this code will hang forever:
while (G_OBJECT (service)->ref_count == ref_count)
g_main_context_iteration (NULL, TRUE);
2) Sometimes the testcase fails (maybe 1 in 200 times for me):
GLib-GIO:ERROR:socket-listener.c:73:connection_cb: assertion failed
(G_OBJECT (service)->ref_count == 2): (3 == 2)
Aborted (core dumped)
The problem is that depending on ordering, cancellation of the async
listener can require further main context iterations before it releases
the reference on the socket service. Furthermore, in some cases, it
requires at least one iteration.
https://bugzilla.gnome.org/show_bug.cgi?id=712570
Add a property to GNetworkMonitor indicating the level of network
connectivity: none/local, limited, stuck behind a portal, or full.
The default implementation just returns none or full depending on the
value of is-available.
https://bugzilla.gnome.org/show_bug.cgi?id=664562
Add G_IO_ERROR_CONNECTION_CLOSED as an alias for
G_IO_ERROR_BROKEN_PIPE, and also return it on ECONNRESET.
It doesn't really make sense to try to distinguish EPIPE and
ECONNRESET at the GLib level, since the exact choice of which error
gets returned in what conditions depends on the OS. Given that, we
ought to map the two errors to the same value, and since we're already
mapping EPIPE to G_IO_ERROR_BROKEN_PIPE, we need to map ECONNRESET to
that too. But the existing name doesn't really make sense for sockets,
so we add a new name.
https://bugzilla.gnome.org/show_bug.cgi?id=728928
This is a convenience method for creating a GNetworkAddress which is
guaranteed to return IPv4 and IPv6 loopback addresses. The program
cannot guarantee that 'localhost' will resolve to both types of
address, so programs which wish to connect to a local service over
either IPv4 or IPv6 must currently manually create an IPv4 and another
IPv6 socket, and detect which of the two are working. This new API
allows the existing GSocketConnectable machinery to be used to
automate that.
Based on a patch from Philip Withnall.
https://bugzilla.gnome.org/show_bug.cgi?id=732317
g_settings_has_signal_handlers() checks whether any of the signals has
pending handlers. However, g_signal_has_handler_pending() matches on
exact detail, even when passing 0. Subscribing to one of GSettings'
signals with a detail will fail this check and never connect to the
backend.
Fix this by calling has_handler_pending() with the key as detail as
well.
https://bugzilla.gnome.org/show_bug.cgi?id=740848
Add a GSocketListener test program. Currently the only test is a
regression test for bug 712570 (based on a standalone bug reproducer
provided by Ross Lagerwall).
If all users of a GThreadedSocketService release their references to the
service while a connection thread is running, the thread function will
release the last reference to the service which causes the finalize to
deadlock waiting for all threads to finish (because it's called from the
thread function).
To fix this, don't wait for all threads to finish in the service's
finalize method. Since the threads hold a reference to the service,
finalize should only be called when all threads are finished running (or
have unrefed the service and are about to finish).
https://bugzilla.gnome.org/show_bug.cgi?id=712570
If SSL 3.0 has been disabled (at the host, application, or library
level), then the "use-ssl3" property becomes a "fail-immediately"
property.
Despite the name, the point of the property wasn't really specifically
to use SSL 3.0; it was to allow fallback when talking to broken
servers that do SSL/TLS negotiation incorrectly and break when they
see unexpectedly-high version numbers. So if we can't fall back to SSL
3.0, then the "use-ssl3" property should fall back to TLS 1.0 instead
(since there are hosts that will reject a TLS 1.2 handshake, but
accept a TLS 1.0 one).
glib-networking is being updated to implement that behavior, so update
the documentation here.
https://bugzilla.gnome.org/show_bug.cgi?id=738633
In commit 8ff5668, we are subscribing the GSettings backend later, but this
meant that we need to initialize cache_lock earlier, as we might try to
use that lock before a change notification is issued to subscribe the
backend, which would then cause an access violation if we are trying to
read GSettings values, as that lock is used to access the Windows Registry.
Initialize cache_lock once we initialize the GSettings Registry backend,
and delete it upon finalize, so that g_settings_read_from_backend() can
proceed normally, even if the GSettings backend is not yet subscribed.
https://bugzilla.gnome.org/show_bug.cgi?id=740413
GSettings objects begin watching for changes as soon as they are created
in order that they can emit the "changed" signal.
In the case of dconf, if we want to be able to emit the changed signal,
we need to go on the bus and add some match rules. This requires
creating the dconf helper thread and also requires initialising GDBus
(which creates another thread).
Some users of GSettings are never interested in the "changed" signal.
One of these users is the glib-networking code that gets run every time
a new network connection is created.
Some users are reporting that they are annoyed that simply establishing
a network connection would spawn two extra threads and create a D-Bus
connection.
In order to avoid doing unnecessary work for these simple uses, delay
the subscription until we know that we will actually need to do it.
We do this in a simple way, using a simple argument: in order for the
user to care that a value changed then they must have:
1) watched for a change signal; and then
2) actually read a value
If the user didn't actually read a value then they cannot possibly be
interested in if the value changed or not (since they never knew the old
value to begin with and therefore would be unable to observe that it
ever changed, since they have nothing to compare the new value with).
This really is a behaviour change, however, and it does impact at least
one user: the 'monitor' functionality of the GSettings commandline tool,
which is interested in reporting changes without ever having known the
original values. We add a workaround to the commandline tool in order
to ensure that it continues to function properly.
It's also possible to argue that it is completely valid to have read a
value and _then_ established a change signal connection under the
(correct) assumption that it would not have been possible to miss a
change signal by virtue of not having returned to the mainloop.
Although this argument is true, this pattern is extremely non-idiomatic,
and the problem is easily avoided by doing things in the usual order.
We never really talked about change notification in the overview
documentation for GSettings, so it seems like now is a good time to add
some discussion, including the new rules for when one can expect change
signals to be emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=733791
This should already work according to the documentation, but doesn't
because main_options is consumed before the check in
g_application_parse_command_line().
Fix by moving the check for main_options up.
https://bugzilla.gnome.org/show_bug.cgi?id=740157
The win32 headers do:
#define interface struct
which is just evil and breaks other code that assumes it can use
"interface" as a variable name. gnetworking.h was supposed to be doing
"#undef interface" after including the win headers, but it did it too
soon, resulting in it getting redefined by a later include. Fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=738551
g_tls_certificate_new_from_file() was only loading the complete chain
if it was fully valid, but we only meant to be validating that it
formed an actual chain (since the caller may be planning to ignore
other errors).
https://bugzilla.gnome.org/show_bug.cgi?id=729739
Fix a hang due to overflow by using unsigned numbers and explicitly
checking if the number overflows to zero. This also fixes the previous
logic which assigned an int which may be negative to an unsigned number
resulting in sign extension and strange results.
Use gsize rather than int to allow for large buffers on 64 bit machines.
https://bugzilla.gnome.org/show_bug.cgi?id=727988
Fix a hang due to overflow by using unsigned numbers and explicitly
checking if the number overflows to zero. This also fixes the previous
logic which assigned an int which may be negative to an unsigned number
resulting in sign extension and strange results.
Use gsize rather than int to allow for large streams on 64 bit machines.
https://bugzilla.gnome.org/show_bug.cgi?id=727988
There are two consistent interpretations that could be taken for memory
handling of the 'invocation' parameter passed to the method_call() virtual
function of GDBusInterfaceVTable
- A reference is passed (transfer full) to the method_call() virtual function,
and that reference is then passed (transfer full) to the return_value/error
functions on GDBusMethodInvocation.
- An internal reference is retained from the point where method_call() is called
until the return_value/error function is called.
Since the return_value/error functions were already marked (transfer full),
we use the first interpretation, annotate the invocation parameter of
method call as (transfer full) and describe this in the documentation, along
with the idea that you are always supposed to call one of the return_value/error
functions.
See bug 738122 for the leak this caused in GJS.
https://bugzilla.gnome.org/show_bug.cgi?id=738259
Clarify in the documentation that a GSource created with
g_cancellable_source_new() must be explicitly removed from its
GMainContext before the GCancellable can be finalised.
This could be a common way of leaking GCancellables.
https://bugzilla.gnome.org/show_bug.cgi?id=737259
da053e34 broke the tls-certificates test by requiring the backend to
implement g_tls_certificate_verify() (which the test TLS backend
didn't). Add a trivial implementation to make the test pass again;
we'll need something more complicated when we add tests that are
supposed to get errors.
So shortcut it.
I wrote this patch less as a performance optimization and more as a
clarification, so that people looking at the code can be assured of this
invariant.
https://bugzilla.gnome.org/show_bug.cgi?id=738374
These functions are inconsistent with our normal conventions in that
they set an output variable to a specified value, even in the case that
an error is thrown.
Document very clearly that this should be considered exceptional.
https://bugzilla.gnome.org/show_bug.cgi?id=737451
Similar to the previous patch, this commit contains a minor violation of
normal API conventions. See the explanation in the previous commit
message.
Heavily based on a patch from Ignacio Casal Quinteiro.
https://bugzilla.gnome.org/show_bug.cgi?id=737451
Add an asynchronous version of _read_all().
This API is not fully consistent with the normal expectations of a
non-asynchronous version. Consistency between the sync and async version is
probably more important.
The API will still bind correctly, but access to all functionality will
not be available: specifically, in the case of an error, higher level
languages will be unable to determine how many bytes were successfully
read before the error. Most users will probably not want to use this
information anyway, so this is OK -- and if they do need the
information, then they can just write the loop for themselves.
Heavily based on a patch from Ignacio Casal Quinteiro.
https://bugzilla.gnome.org/show_bug.cgi?id=737451
Commit e24e89b accidentally ironically introduced a typo when replacing
the code with symbolic contents. Specifically, "Added Associations" was
replaced with "Default Applications" when reading defaults.list, giving
a warning about the file containing a "Default Applications" group.
If this was intended, it should have not been lumped in with a cleanup.
This patch changes the behavior of the following functions:
g_tls_certificate_new_from_pem
g_tls_certificate_new_from_file
g_tls_certificate_new_from_files
If more than one certificate is found it will try to load the chain.
It is assumed that the chain will be in the right order (top-level
certificate will be the last one in the file). If the chain cannot be
verified, the first certificate in the file will be returned as before.
https://bugzilla.gnome.org/show_bug.cgi?id=729739
g_thread_pool_push() only returns an error if it fails to spawn a new
thread. However, it unconditionally adds the task to its worker queue,
so:
• if _any_ threads exist in the pool, the task will eventually be
handled; and
• if _no_ threads exist in the pool, the task will be handled if one
is eventually successfully spawned.
If no more threads are ever spawned, the process probably has bigger
problems than a single GTask which is taking forever to complete.
https://bugzilla.gnome.org/show_bug.cgi?id=736806
For the GPtrArray example, several variables declared on the same line
is harder to read and to work with (to move, remove or comment a single
variable declaration).
Some desktop file directories, like /usr/local/share/applications may be
missing on some systems.
When we try to inotify on these directories, this will result in a
every-4-seconds poll being setup which is quite bad.
This is an issue that should be fixed in inotify itself but the problem
is much larger there. For now, we can work around it in GDesktopAppInfo
by refusing to monitor missing directories.
We may get some spurious notifications of changes in the case that
/usr/local/share or /usr/local/share/applications is created without
actually adding desktop files, but spurious changes can already be
reported in other cases, so that's OK. We won't get (user-visible)
notification for a simple case of a completely unrelated file being
created (however we cannot avoid the wakeup in this case due to how
inotify works). That's probably pretty theoretical, though, since files
in /usr don't change much and for the home directory we're likely to
have at least ~/.config and ~/.local existing.
https://bugzilla.gnome.org/show_bug.cgi?id=736350
We use "tweaks" structures to track how a particular directory impacts
the list of added, removed and default applications. We maintain this
set of tweaks for each directory, in a hash table, keyed by unaliased
mime type name, in order to facilitate fast lookups.
A typo in the logic for creating and maintaining the uniqueness of these
structures was causing the default app to be selected incorrectly from
time to time. Fix that.
If a g_socket_client_connect_async() operation is cancelled between the
CONNECTING and CONNECTED events (i.e. while in the
g_socket_connection_connect_async() call), the code in
g_socket_client_connected_callback() would previously unconditionally
loop round and try the next socket address from the address enumerator
(by calling enumerator_next_async()). This would correctly handle the
cancellation and return from the overall task — but not before emitting
a spurious RESOLVING event.
Avoid emitting the spurious RESOLVING event by explicitly handling
cancellation at the beginning of g_socket_client_connected_callback().
https://bugzilla.gnome.org/show_bug.cgi?id=735179
This function adds a single main option entry to be handeled by
GApplication. The option entry has it arg_data field set to NULL
and will be added to the applications packed_options.
The rationale for this is that bindings will be able to add
command line options even when they can't use the un-boxed struct
GOptionEntry.
https://bugzilla.gnome.org/show_bug.cgi?id=727455
It turns out that this bug actually would (sometimes) impact any sort of
fixed-sized array with an alignment requirement of 8 due to incorrectly
counting the alignment inserted between the (aligned 4) array length and
the actual data.
Fix this properly and remove the exception for doubles.
https://bugzilla.gnome.org/show_bug.cgi?id=732754
We're using a precondition in the middle of the function, and if we
hit it, we leak the closure.
Let's allocate the closure per path; this allows us to allocate it
before path-specific preconditions, and better avoids a pointless
malloc/free pair in the unhandled case.
https://bugzilla.gnome.org/show_bug.cgi?id=733576
This is a best-effort approach to preventing SIGPIPE emissions on Darwin
and iOS, where they continue to be intercepted by the Xcode debugger
even if SIG_IGN prevents them crashing the program.
This is similar to the existing code which sets MSG_NOSIGNAL on all
send() calls. MSG_NOSIGNAL doesn't exist on Darwin though.
Based on a patch from Philip Withnall.
https://bugzilla.gnome.org/show_bug.cgi?id=728730
When establishing a D-Bus connection failed, g_dbus_object_manager_client_finalize()
calls g_object_ref(manager->priv->connection) when that pointer is NULL,
which is considered and logged as error by glib.
https://bugzilla.gnome.org/show_bug.cgi?id=732984
We don't use this for anything inside of GApplication yet, but Gtk is
about to start using it to find various bits of the application (such as
its menus, icons, etc.).
By default, we form the base path from the application ID to end up with
the familiar /org/example/app style.
https://bugzilla.gnome.org/show_bug.cgi?id=722092
This is not a functional change, as the hints field is static and hence
automatically initialised to zero — which happens to be what AF_UNSPEC
and the unspecified protocol are defined as. However, it’s best to be
explicit about this, in case AF_UNSPEC is _not_ defined as zero.
https://bugzilla.gnome.org/show_bug.cgi?id=732739
I recently needed to nul-terminate the returned buffer, and I wasn't
sure if g_input_stream_read() does that or not. I've checked
glocalfileinputstream.c, which calls read(2) which doesn't nul-terminate
the buffer. So I assume it's the same behavior for all GInputStream
subclasses.
https://bugzilla.gnome.org/show_bug.cgi?id=732704
When using this API, I wasn't sure what the cancellable does. I think
it's generally desirable to kill the subprocess if the wait operation is
cancelled, since in this case the application is no longer interested by
the subprocess.
https://bugzilla.gnome.org/show_bug.cgi?id=732704
A critical message is printed when a parameter of g_file_equal() is not
a GFile. When we read the documentation before this commit, we can think
that passing NULL or another type than GFile is allowed, but it is not
the case.
Another option is to allow NULL parameters. But for consistency with
e.g. g_str_equal(), it's probably better to keep the code as is.
https://bugzilla.gnome.org/show_bug.cgi?id=732357
- g_subprocess_launcher_spawn() and spawnv(): there is no other way
AFAIK to create a GSubprocess from a launcher. So these
functions are not "convenience helper".
- annotate optional arguments for g_shell_parse_argv().
- other trivial fix
https://bugzilla.gnome.org/show_bug.cgi?id=732357
Document that giving %NULL for the activate handler is supported since
GLib 2.40. We documented this on GSimpleAction itself (where the
default handler functionality is implemented) but expecting the user to
dig that up is asking a bit much.
Also, add some more explicit documentation about the conditions under
which each field is expected to be filled in.
https://bugzilla.gnome.org/show_bug.cgi?id=732429
This property has been deprecated for three years after only having
existed for one. We've wanted to reuse the name for all that time, so
let's try to actually remove it now and see if we can get away with it.
https://bugzilla.gnome.org/show_bug.cgi?id=732102
Instead of closing the sockets explicitly, let them close themselves
when their final reference is dropped. This makes use of
g_socket_listener_add_socket() more natural.
https://bugzilla.gnome.org/show_bug.cgi?id=732107
This is quite important, as it means you can safely let the GSocket drop
out of scope while maintaining a reference to the GSource, and the
socket will remain open. That means fewer closure structures, simpler
code, and fewer allocations.
https://bugzilla.gnome.org/show_bug.cgi?id=732081
'folder' is the name of the folder icon in the incon naming spec,
and the Adwaita icon theme doesn't include an inode-directory icon.
This fixes folders appearing as generic file in the file chooser.
https://bugzilla.gnome.org/show_bug.cgi?id=731996
The stdout FD passed to dbus-daemon is propagated to all its child
processes, such as service activated processes. If we close the FD after
reading the bus address from the daemon, any child process which
subsequently writes to stdout (e.g. for logging) will get a SIGPIPE and
explode.
Instead of closing the stdout FD immediately after dbus-daemon has
spawned, keep it open until the daemon is killed.
https://bugzilla.gnome.org/show_bug.cgi?id=732019
Availability of the g_nextstep_settings_backend_get_type() prototype
is controlled by HAVE_COCOA in gsettingsbackendinternal.h and the
actual implemenation by OS_COCOA in Makefile.am. Therefore, the
giomodule.c call to that function should also be protected by a COCOA
token rather than an CARBON token (cocoa and carbon are independent
autoconf tests).
https://bugzilla.gnome.org/show_bug.cgi?id=731425
GResolver doesn't do full validation of its inputs, so in some of
these tests, the fact that we were getting back
G_RESOLVER_ERROR_NOT_FOUND is because the junk string was getting
passed to an upstream DNS resolver, which returned NXDOMAIN. But if
there's no network on the machine then we'd get
G_RESOLVER_ERROR_INTERNAL instead in that case.
Windows does not like g_unlink() to be called on files whose file
descriptor is still open, so doing that would cause a permission
denied error. Since the fd is not used in that function after
acquiring the temp file, close it earlier before
g_file_set_contents(), so that it can complete successfully.
This fixes a number of GTK+ tests on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=719344
- GSubprocessLauncher exists since 2.40, not 2.36
- more logical order for g_markup functions
- fix short description of GMarkup
- GMarkupParser: specify that some parameters are NULL-terminated.
- g_string_new (NULL); is possible.
- other trivial fixes.
https://bugzilla.gnome.org/show_bug.cgi?id=728983
* removed passing GError to ensure_input_padding() function
- it was necessary before commit 3e5214c15c
when we used GData*Streams and GMemoryInputStream with
g_seekable_seek() - now it's useless,
* removed checking return value of ensure_input_padding()
function - in previous implementation (like above)
g_seekable_seek() could return FALSE - now it's always TRUE,
* removed passing GError to g_memory_buffer_read_*() functions
and checking returned value - it also has been inherited after
old implementation with g_data_input_stream_read_*() functions
- now it's also useless
* cleaned up code formatting,
https://bugzilla.gnome.org/show_bug.cgi?id=729875
Expand the functionality of g_desktop_app_info_set_desktop_env() to
include the possibility of passing strings containing ':' characters (as
some apps, such as gnome-session, are directly passing the value of
XDG_CURRENT_DESKTOP). At the same time, deprecate it, since now we get
the list from the environment variable for ourselves.
Modify the checks in g_desktop_app_info_get_show_in() to deal with
multiple items listed in XDG_CURRENT_DESKTOP. For example, if we find
that we have
XDG_CURRENT_DESKTOP=GNOME-Classic:GNOME
and a desktop file contains:
OnlyShowIn=GNOME
then we will show this file because of the fallback to GNOME. If the
file _also_ contains the line:
NotShowIn=GNOME-Classic
Then we will not show it, because GNOME-Classic comes before GNOME in
XDG_CURRENT_DESKTOP.
https://bugzilla.gnome.org/show_bug.cgi?id=729813
GDummyTlsConnection didn't implement the "interaction" property,
meaning you'd get warnings if you tried to set it while creating a
GTlsConnection when using the dummy backend. (Of course, trying to
create the GTlsConnection will fail anyway, but it ought to fail
without hitting any g_warnings.)
It was previously possible for GThreadedResolver to return an empty list
and no error in response to a g_resolver_lookup_by_name() call, if it
happened that all the addresses returned by getaddrinfo() could not be
converted from native addresses to GSocketAddresses.
Fix that by setting a G_RESOLVER_ERROR_NOT_FOUND if the returned list is
empty.
https://bugzilla.gnome.org/show_bug.cgi?id=728776
The documentation previously wasn’t clear about whether the GResolver
methods could return an empty list and no error. On balance, this seems
like a bad idea, and GResolver should commit to always return a
non-empty list, or an error (which should be G_RESOLVER_ERROR_NOT_FOUND
if the list would otherwise be empty).
https://bugzilla.gnome.org/show_bug.cgi?id=728776
ddf82a25 removed the use of non-literal format strings from
gthreadedresolver.c, but left the "#pragma GCC diagnostic ignored
-Wformat-nonliteral" behind.
These did show up in the html. Since symbol names are checked for a
trailing plural s when generating the docs, the links stay functional
after removing these comments.
https://bugzilla.gnome.org/show_bug.cgi?id=728380
Redo the code for type-based selection of applications (all,
recommended, default, fallback) based on the new DesktopFileDir
structures that we introduced last cycle.
At the same time, we expand the functionality to add support for the new
features of the specification:
- moving ~/.local/share/applications/mimeapps.list to ~/.config/
- per-desktop default applications (via XDG_CURRENT_DESKTOP)
- sysadmin customisation of defaults (via /etc/xdg/mimeapps.list)
- deprecation of the old defaults.list, favouring the use of
/usr/share/applications/mimeapps.list (or gnome-mimeapps.list) to
accomplish the same
We modify the mimeapps testcase to check for mimeapps.list having been
created in XDG_CONFIG_HOME instead of XDG_DATA_HOME.
The modification is a net reduction of code (due to less duplication in
bookkeeping). It is also an increase in performance and reduction in
memory consumption (due to simplified data structures). Finally, it
removes the stat-based timestamp checking in favour of the
GFileMonitor-based approach that was already being used in the
implementation of DesktopFileDir (in order to know if we had to rescan
the desktop files themselves).
https://bugzilla.gnome.org/show_bug.cgi?id=728040
We currently assume that setting an application as the default will take
it to the front of the list of supported applications for a given type,
but this is not necessarily true.
Check instead that the application is actually set as default.
https://bugzilla.gnome.org/show_bug.cgi?id=728040
Set XDG_DATA_DIRS to make sure we don't use /usr/share from the
appmonitor test. We will soon throw a warning if we find defaults.list,
so make sure we don't open ourselves up to that if there is one on the
system.
https://bugzilla.gnome.org/show_bug.cgi?id=728040
The desktop file for myapp3 didn't declare support for image/png, but
the testcase expects it to be recommended on the basis of it being the
default app according to defaults.list.
This will not work in the future -- we will only list apps that actually
support the filetype in question, unless they've been explicitly added
as associations.
https://bugzilla.gnome.org/show_bug.cgi?id=728040
The app launch context may just not support startup notification,
in which case, g_app_launch_context_get_startup_notify_id() will
return NULL.
Failure to take this into account leads to criticals like this:
gnome-session[8489]: GLib-CRITICAL: g_variant_new_take_string: assertion 'string != NULL' failed
gnome-session[8489]: GLib-CRITICAL: g_variant_new_variant: assertion 'value != NULL' failed
gnome-session[8489]: GLib-CRITICAL: g_variant_get_type: assertion 'value != NULL' failed
gnome-session[8489]: GLib-CRITICAL: g_variant_type_is_subtype_of: assertion 'g_variant_type_check (type)' failed
https://bugzilla.gnome.org/show_bug.cgi?id=728066
Add G_DBUS_ERROR codes for:
* org.freedesktop.DBus.Error.UnknownObject
* org.freedesktop.DBus.Error.UnknownInterface
* org.freedesktop.DBus.Error.UnknownProperty
* org.freedesktop.DBus.Error.PropertyReadOnly
These were discussed on the dbus mailing list
and introduced in the following libdbus commit:
2c34514620c4b79ea4ec71d1db583379138d01ac
https://bugzilla.gnome.org/show_bug.cgi?id=727900
g_tls_certificate_list_new_from_file() was supposed to ignore non-PEM
content, but it accidentally required that there not be anything after
the last certificate. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=727692
Make sure that the @ sign is inside the authority part before attempting
to parse the userinfo. We do this by checking if the @ sign comes before
any of the possible authority delimiters.
Add unit test to verify parsing of ftp://ftp.gnome.org/start?foo=bar@baz
https://bugzilla.gnome.org/show_bug.cgi?id=726040
Rather than having special code in gsocket.c, handle Winsock errors
along with other Win32 errors in gioerror.c
Also, reference g_win32_error_message() from the
g_io_error_from_win32_error() docs, and update the
g_win32_error_message() docs to clarify that it works with Winsock
error codes too.
Map EPROTONOSUPPORT, ESOCKTNOSUPPORT, EPFNOSUPPORT and EAFNOSUPPORT to
G_IO_ERROR_NOT_SUPPORTED in g_io_error_from_errno(). (GSocket's
socket_io_error_from_errno() already did this with the corresponding
Winsock errors.)
Also map EOPNOTSUPP, which on Linux is the same as ENOTSUP, but may
not be on other platforms.
Also, rewrite the EAGAIN/EWOULDBLOCK section to use the simpler idiom
used by EEXIST/ENOTEMPTY and (now) ENOTSUP/EOPNOTSUPP.
Use #GVariant instead of GVariant.
g_notification_add_button_with_target,
g_notification_set_default_action_and_target:
Replace 'format_string' with 'target_format'.
g_notification_set_default_action_and_target_value:
Remove paragraph that apparently had been accidentally copied from
g_notification_set_default_action_and_target.
https://bugzilla.gnome.org/show_bug.cgi?id=727123
In the event that a GSettings object is being destroyed just as a change
signal is being delivered, the destroying thread will race with the
dconf worker thread for acquiring the lock on the GSettingsBackend.
If the signalling thread gets there first then the destroying thread
will block on the lock. The signalling thread adds a reference to the
GSettings object that is being destroyed and releases the lock. The
idea is that this should prevent the GSettings object from being
destroyed and thus maintain its entry in the list. Unfortunately, the
weak reference notify function is already running and as soon as we
release the lock, the list entry is removed.
The signalling thread crashes.
This bug is indicative of a serious problem encountered in many
situations where GObject instances are touched from multiple threads.
Ideally, we will move to a place where g_object_ref() is not called at
all on the GSettings object from the dconf worker thread and instead, a
dispatch will be done without holding a reference (similar to how
GAppInfoMonitor presently works). This would also prevent the
unfortunate case of someone dropping what they assume to be the last
reference on a GSettings object, only to have an already-pending signal
delivered once they return to the mainloop, crashing their program.
Making this change for GSettings (with multiple instances per thread,
the possibility of multiple backends and each instance being interested
in different events) is going to be extremely non-trivial, so it's not a
change that makes sense at this point in the cycle.
For now, we can do a relatively small and isolated tweak so that we
never access the list except under a lock. We still perform the bad
pattern of acquiring a ref in a foreign thread which means that we still
risk delivering a signal to a GSettings object that the user has assumed
is dead (unless they explicitly disconnect their signal handler). This
is a problem that we already had, however.
https://bugzilla.gnome.org/show_bug.cgi?id=710367
Change the order of the arguments on the (internal) keys_changed callback in
GSettingsListenerVTable.
This means that all functions in the table now fit the following signature:
void (* f) (GObject *target,
GSettingsBackend *backend,
const gchar *name_or_path,
gpointer origin_tag,
const gchar * const *names);
allowing the possibility of arguments ignored at the end.
This allows us to simplify our dispatch-to-thread code in GSettingsBackend,
making it a bit less generic.
So far, this should be a straight refactor.
https://bugzilla.gnome.org/show_bug.cgi?id=710367
The _finish functions for GUnixVolume _mount and _eject functions were
never implemented, having been simply stubbed out as 'return TRUE;'.
Implement them.
https://bugzilla.gnome.org/show_bug.cgi?id=724916
The existing code is buggy and now that we have GSubprocess, we should just use
it instead, allowing for some substantial reduction in complexity.
https://bugzilla.gnome.org/show_bug.cgi?id=724916
As of e6af432, g_content_type_get_symbolic_icon() returns non-symbolic
fallbacks. Thus, we can't append another symbolic icon to the fallbacks.
The special case was a bit of a hack anyway. It was only applied to
themed icons and there was no generic fallback for mime types that are
not folders.
https://bugzilla.gnome.org/show_bug.cgi?id=726046
We need to have these in BUILT_SOURCES so that 'make' knows to generate them
before attempting to compile other .c files in the same directory (since some
of these files include the header).
Should fix up remaining issues about partial versions of this file being
included under parallel builds.
https://bugzilla.gnome.org/show_bug.cgi?id=725891
Add a test for GSubprocess to test setting, unsetting and inheritance of
environment variables. Use communicate() to give it a bit more of a
workout as well.
https://bugzilla.gnome.org/show_bug.cgi?id=725651
On the splice for stdout or stderr completing, GSubprocess calls
_slice_finish() to collect the result.
We assume that a zero return value here means failure, but in fact this
function returns a gssize -- the number of bytes transferred, or -1 for
an error.
This causes GSubprocess to mistakenly think that it has an error when it
actually just has an empty buffer (as would be the case when collecting
stderr from a successful command).
Check for -1 instead of FALSE to detect the error.
https://bugzilla.gnome.org/show_bug.cgi?id=724916
Add the basename from the first component of the Exec line to the list of
strings to search for via g_desktop_app_info_search().
We treat Exec as a fairly strong match -- just below the visible name.
Add a testcase to make sure everything is working OK.
https://bugzilla.gnome.org/show_bug.cgi?id=725023
Visual C++ is quite zealous about checking against the types used in the
initializing of array of structures, even up to Visual C++ 2013. Fix this
by splitting up the initializing steps.
https://bugzilla.gnome.org/show_bug.cgi?id=724609
There is no longer any code left in the check/prepare functions on UNIX,
so put %NULL in the GSourceFuncs vtable.
This also allows us to simplify some logic.
https://bugzilla.gnome.org/show_bug.cgi?id=724707
We are reusing the GPollFD.revents field of the source to store a
temporary value. Use a local variable for that instead.
This is a refactor to make the next commit easier to understand.
https://bugzilla.gnome.org/show_bug.cgi?id=724707
Now that GCancellable's GSource is based on _set_ready_time() instead of
an fd, we should use it as a child source, instead of forcing the
creation of the fd and adding it as a poll.
https://bugzilla.gnome.org/show_bug.cgi?id=724707
Windows does not come with inet_aton(), and this check on IPv4 addresses
is actually not needed on Windows as the getaddrinfo() implementation on
Windows already rejects non-standard and non-real IPv4 numbers-and-dots
addresses.
https://bugzilla.gnome.org/show_bug.cgi?id=724609
After getting an EINTR, g_socket_condition_timed_wait() has to adjust
its timeout, but it was trying to convert from nanoseconds to
microseconds by multiplying by 1000 rather than dividing... Oops.
https://bugzilla.gnome.org/show_bug.cgi?id=724239
There is a race condition in the makefile that can result in build failures like this in parallel builds:
| ./gdbus-test-codegen-generated.h:7:0: error: unterminated #ifndef
| #ifndef __GDBUS_TEST_CODEGEN_GENERATED_H__
This is because a rule like this:
x.c x.h: prerequisites
@commands
doesn't consider x.c and x.h together. Instead, it expands to two rules, one to
generate x.c and one to generate x.h, which happen to run the same commands. In
the worst case they execute in parallel, overwriting each other's output.
Signed-off-by: Ross Burton <ross.burton@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=723616
If a GSimpleAsyncResult has a NULL source tag, allow it to compare
valid to a non-NULL source tag in g_simple_async_result_is_valid(), to
simplify cases where, eg, g_simple_async_result_new() and
g_simple_async_result_report_error_in_idle() are both used.
https://bugzilla.gnome.org/show_bug.cgi?id=721458
We have a configure.ac check for lib.exe that attempts to enable
creation of .lib files for our 5 public libraries. That has been broken
for a long time for two reasons:
1) the Makefiles hardcode 'lib' instead of 'lib.exe'
2) we dropped generation of .def files quite some time ago (except for
in gthread where we have the two-symbol file under version control)
Add new rules for creating .def files from dumpbin.exe (which you should
have if you have lib.exe) and fix the .lib rules to use lib.exe.
Add a bit of $(AM_V_GEN) all around, as well.
https://bugzilla.gnome.org/show_bug.cgi?id=722033
In addition to the standard "192.168.1.1" format, there are numerous
legacy IPv4 address formats (such as "192.168.257",
"0xc0.0xa8.0x01.0x01", "0300.0250.0001.0001", "3232235777", and
"0xc0a80101"). However, none of these forms are ever used any more
except in phishing attempts. GLib wasn't supposed to be accepting
these addresses (neither g_hostname_is_ip_address() nor
g_inet_address_new_from_string() recognizes them), but getaddrinfo()
accepts them, and so the parts of gio that use getaddrinfo()
accidentally did accept those formats.
Fix GNetworkAddress and GResolver to reject these address formats.
https://bugzilla.gnome.org/show_bug.cgi?id=679957
Windows needs a special inefficient hack to implement
g_socket_get_available() correctly for UDP sockets, but that hack
isn't needed for TCP, and in fact, might give the wrong answer in that
case. Fix it to only use the hack with UDP.
Also, fix that case to handle non-blocking sockets as well.
And add a test case for g_socket_get_available() with TCP.
https://bugzilla.gnome.org/show_bug.cgi?id=723422
Since we are no longer using sgml mode, using /* */ to
escape block comments inside examples does not work anymore.
Switch to using line comments with //
Our check for inotify_init1() being defined is broken. We happily
declare that inotify is supported, even if the check fails.
This was originally intended to check for inotify_init1 in the libc so
that we could fall back to inotify_init if it was not yet defined.
FreeBSD has a libinotify that emulates the inotify API via kqueue. It
installs a <sys/inotify.h> header and requires linking to -linotify. We
don't want to falsely detect working inotify in this case.
Treat the lack of inotify_init1() in the libc as a lack of inotify
support. This requires only a new libc -- we still support old kernels:
in the case that inotify1_init() fails, we fall back to inotify_init().
https://bugzilla.gnome.org/show_bug.cgi?id=724330
It’s not enough to close a connection by calling g_input_stream_close()
and g_output_stream_close() on its two substreams: to close the
underlying socket, one must use g_io_stream_close(). Document that.
https://bugzilla.gnome.org/show_bug.cgi?id=724278
Since all element markup is now gone from the doc comments,
we can turn off the gtk-doc sgml mode, which means that from
now on, docbook markup is no longer allowed in doc comments.
To make this possible, we have to replace all remaining
entities in doc comments by their replacement text, & -> &
and so on.
Add support for parsing command line options with GApplication.
You can add GOptionGroup and GOptionEntry using two new APIs:
g_application_add_option_group() and
g_application_add_main_option_entries().
Also add a "handle-local-options" signal that allows handling of
commandline arguments in the local process without having to override
local_command_line.
As a special feature, you can have a %NULL @arg_data in a GOptionEntry
which will cause the argument to be stored in a GVariantDict. This
dictionary is available for inspection and modification by the
"handle-local-options" signal and can be forwarded to the primary
instance in cases of command line invocation (where it can be fetched
using g_application_command_line_get_options()).
https://bugzilla.gnome.org/show_bug.cgi?id=721977
In some virtualization setups, ifindexes can end up becoming very
large, and so the existing code that assumes that *some* interface
must have an index less than 255 fails.
Fix this by explicitly looking for "lo" first. And then if that fails
(on Windows, or other systems where the loopback interface is not
called "lo"), try indexes up to 1024 rather than 255.
https://bugzilla.gnome.org/show_bug.cgi?id=723048
For some reason, IPv6 link-local multicast routing changes all the
time. GNetworkMonitorBase was already ignoring them for purposes of
emitting network-changed, but GNetworkMonitorNetlink would still
trigger a re-dump after getting one, so network-changed would end up
getting emitted anyway.
glocalfile.c: In function 'g_local_file_measure_size_of_file':
glocalfile.c:2654:3: warning: passing argument 2 of 'g_lstat' from
incompatible pointer type [enabled by default]
if (g_lstat (name->data, &buf) != 0)
^
In file included from glocalfile.c:68:0:
../glib/gstdio.h:135:5: note: expected 'struct GStatBuf *' but argument
is of type 'struct _stati64 *'
https://bugzilla.gnome.org/show_bug.cgi?id=711547
gdbusauthmechanismexternal.c: In function 'mechanism_client_initiate':
gdbusauthmechanismexternal.c:355:3: warning: 'initial_response' may be
used uninitialized in this function [-Wmaybe-uninitialized]
return initial_response;
^
gdbusauthmechanismexternal.c:332:10: note: 'initial_response' was
declared here
https://bugzilla.gnome.org/show_bug.cgi?id=711547
glocalfileinfo.c: In function '_g_local_file_info_get':
glocalfileinfo.c:1955:11: warning: passing argument 3 of
'get_thumbnail_attributes' from incompatible pointer type [enabled by
default]
get_thumbnail_attributes (path, info, &statbuf);
^
glocalfileinfo.c:1285:1: note: expected 'const struct GStatBuf *' but
argument is of type 'struct _stati64 *'
get_thumbnail_attributes (const char *path,
https://bugzilla.gnome.org/show_bug.cgi?id=711547
If the action is stateful and the user doesn't have their own activate handler
then do some reasonable things for ourselves.
After a lot of experience using stateful GSimpleAction it turns out that
people almost always end up using it in the same ways:
A boolean-typed stateful action with no parameter is most likely going
to want to be toggled. Any other type of action that has the parameter
type equal to the state type probably intends for activation to
represent a request to change the state.
This patch implements those two cases. This will let people stop
writing their own trivial handlers over and over.
https://bugzilla.gnome.org/show_bug.cgi?id=722503
Clarify in the documentation that the commandline arguments passed
around by GApplication (to local_command_line and returned via
g_application_command_line_get_arguments()) are in the GLib filename
encoding (ie: UTF-8) on Windows, not the system code page.
Fix the mismatch that would result from having argv passed to
g_application_run() in main() on Windows (where it is in the system
code page) by ignoring argc/argv on Windows and calling
g_win32_get_command_line() for ourselves. Document this.
This might be a slight API break on Windows: we documented that it was
possible to call g_application_run() with arguments other than argc/argv
and now doing that will result in those arguments being ignored. It has
always been recommended practice to only call g_application_run() from
main() directly, however, and all of our code examples have shown only
this. We will see if this causes any issues and consider reevaluating
the situation if so.
https://bugzilla.gnome.org/show_bug.cgi?id=722025
Add a note to the documentation for g_file_new_for_commandline_arg()
that this function is intended to operate on strings already in the GLib
filename encoding on Windows.
This has been the case for a long time, but this documents the
requirement.
https://bugzilla.gnome.org/show_bug.cgi?id=722025
g_strconcat() allocates memory, it needs to be freed.
==10653== 1,400 bytes in 50 blocks are definitely lost in loss record
1,838 of 1,851
==10653== at 0x4A0645D: malloc (in
/usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==10653== by 0x54ACB22: g_malloc (gmem.c:102)
==10653== by 0x54ACE4D: g_malloc_n (gmem.c:343)
==10653== by 0x54C8463: g_strconcat (gstrfuncs.c:589)
==10653== by 0x4D6ED38: get_xattrs_from_fd (glocalfileinfo.c:660)
==10653== by 0x4D71622:
_g_local_file_info_get_from_fd (glocalfileinfo.c:2028)
==10653== by 0x4D731A0:
g_local_file_input_stream_query_info (glocalfileinputstream.c:356)
==10653== by 0x4C996D8:
g_file_input_stream_query_info (gfileinputstream.c:148)
==10653== by 0x4C863F6: file_copy_fallback (gfile.c:3120)
==10653== by 0x4C86DD2: g_file_copy (gfile.c:3398)
https://bugzilla.gnome.org/show_bug.cgi?id=722357
The default local_command_line handler has a fast return path for the
case that we handle the commandline by forwarding it to the primary
instance, but this doesn't account for the fact that we may want to
become a service.
Allow for this by making sure we don't take the fast path of the service
flag is set.
Add a --gapplication-service switch to the default implementation of
local_command_line. This name is unlikely to clash with any option used
by an existing application.
When a normal application (neither service nor launcher) is launched with
exactly this one argument, G_APPLICATION_IS_SERVICE will be set.
The idea is that people will write their D-Bus service file with
--gapplication-service on the Exec line. This provides a nice
compromise for people who want the benefits of DBusActivatable
applications but without losing the ability to easily run them directly
(under the debugger or inside jhbuild, etc.)
https://bugzilla.gnome.org/show_bug.cgi?id=710965
Make sure we escape any special characters that are found in annotation
names or values to avoid emitting a malformed XML document in response
to an Introspect call.
https://bugzilla.gnome.org/show_bug.cgi?id=721796
The file extension of the GIO module could be something other than .so,
depending on platform. Use G_MODULE_SUFFIX so that the test will run
correctly on non-*nix platforms, such as Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=719344
If installed tests are not enabled, installed_testdir is not
defined, so we end up trying to create /modules and to chmod
things in /x-content/, which is not right.
When losing the D-Bus connection, we would write to stdout about it just
before killing ourselves with SIGTERM. We're a library, so we should
probably use stderr instead.
https://bugzilla.gnome.org/show_bug.cgi?id=721324
Part of the purpose of g_settings_get_child() was that it could be used
after you delay() a GSettings object, and then apply() all of the
settings together. In order for that to work, we need to share the
backend.
https://bugzilla.gnome.org/show_bug.cgi?id=720891
The x-content/win32-software type is only recognized if
the autorun.exe file is executable. Since the file is installed
as data, we need to fix up its permissions in an
install-data-hook.
This test is inspired by its namesake in GTK+. We instantiate
all types, and check the default values of their properties,
with some exceptions for types that are known not to work.
In case an object is already monitored, we lock then return without
unlocking it which can then result in a self deadlock. So properly
unlock before returning.
https://bugzilla.gnome.org/show_bug.cgi?id=721074
Use g_variant_parse_error_print_context() to format the error message
from the GVariant parser.
There is a slightly dubious interaction with the "parse me harder"
functionality here. We're probably going to have to deal with that
separately.
https://bugzilla.gnome.org/show_bug.cgi?id=715028
I recently had to track down why these tests failed. Turned
out that some rogue package on my system had installed mime
types that declared all files with 3 letter names to be
'chemical/x-turbomole-vibrational'.
This change will make it more obvious what is going on by
mentioning the mime types in the assertion message.
When replacing a version of goa-daemon (from gnome-online-accounts)
by a newer version with some added interfaces, evolution-data-server
and the gvfs-goa volume monitor might crash as there's no interface
definition for this new interface.
Work-around this by returning earlier from the _notify() implementation,
rather than accessing invalid memory.
https://bugzilla.gnome.org/show_bug.cgi?id=720539
Add missing (allow-none) annotations to
g_desktop_app_info_launch_uris_as_manager(). Tested with
python -c "from gi.repository import GLib, Gio; Gio.DesktopAppInfo.new('gcalctool.desktop').launch_uris_as_manager([], None, GLib.SpawnFlags.SEARCH_PATH|GLib.SpawnFlags.STDOUT_TO_DEV_NULL, None, None, None, None)"
which is necessary to do a launch_uris() without leaking stdout.
https://launchpad.net/bugs/1259721
GDBusConnection cleanup is inherently racy due to its use of worker
threads. Put tests that expect a NULL G_BUS_TYPE_SESSION singleton
as the first tests to work around cleanup races.
https://bugzilla.gnome.org/show_bug.cgi?id=719837
Allow only format strings that copy all values (i.e, don't contain '&'),
as the returned pointers might become invalid in some rare cases.
Since this is technically an API break, this patch only prints a
critical when a faulty format string is detected, but still fetches the
values.
https://bugzilla.gnome.org/show_bug.cgi?id=719979
Usually async methods copy/ref its arguments so caller can
forget about them. g_file_replace_contents_async() and
g_output_stream_write_async() are exceptions.
https://bugzilla.gnome.org/show_bug.cgi?id=690525
The desktop-files directory contains a mimeapps.cache file
that was not installed as data for installed tests, causing
the file measure test to fail only in when installed.
Make the testcase compare the byte size to what is reported
by du. Also add a test for the async api, and mak eit test
the progress reporting callback.
Comparing the code generated for the setter and other methods without
(real) return value, I noticed that the setter does not unref the
gvariant it gets.
https://bugzilla.gnome.org/show_bug.cgi?id=719472
This function turns a varargs argument list into a string array,
but forgets to NULL-terminate it. This function was not covered
by unit tests...so it was broken.
The test reveals that there's something fishy with this monitor.
One has to call g_app_info_get_all() for it to start working,
and then it only works once.
The previous patch to simplify the GSettings commandline tool by making
more use of global variables went a bit too far and broke 'gsettings
monitor' when used without a specific key.
Fix that up again.
The static analyser (correctly) considers a type check to fail if the
variable is NULL. In this case, the address must be non-NULL as no error
was thrown by g_socket_connection_get_remote_address(), but the static
analyser doesn’t know this.
Add a non-NULL assertion anyway, both to shut the analyser up, and
because it’s good extra testing.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
These prevent some false positives from the static analyser which are
caused by it not inspecting the invariants of
g_subprocess_communicate[_utf8]_finish() (i.e. that stdout and
stdout_str will always be set unless an error was returned).
They’re also good testing anyway.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
If the initial part of the header (‘MIME-TreeMagic’) is valid, but the
following line does not start with ‘[’ (i.e. is not a valid section
line), insert_matchlet() will be called with a NULL match pointer, and
will crash with a NULL pointer dereference.
Fix this by bailing out if a valid section line isn’t encountered before
the first insert_matchlet() call (i.e. between the header line and the
first data line).
Note that this has not been tested against a real treemagic file; the
fix is purely theoretical.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
In the case that (n_fds == 0 && fds == NULL), memcpy() would be called
against a NULL src pointer. Even though the number of bytes to copy is
0, avoid the possibility of a crash by only calling if fds is non-NULL.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
The static analyser will check dynamic type assertions and assume that
if they fail, the variable can either have the wrong type, or be NULL
(which is correct). The analyser doesn’t know that other constraints in
the API ensure the variable is non-NULL.
Add a non-null assertion to help the static analyser and shut it up in
this case.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
This can happen if the hash table lookup for ‘noncefile’ fails, and
hence the first ‘goto out’ is hit, at which point resolver is still
NULL.
Found with scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
Be a little bit more careful in regards to initializing a primitive type
variable before passing it by reference, as it could have random stuff
in the variable's address depending on the CRT, such as MSVCR110.DLL,
causing random, invalid stuff being written in that address.
This will fix this test when built with Visual Studio 2012.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
G_OS #ifdefs are only available once glibconfig.h has been
evaluated ; that is, after including glib headers.
Move this block down so it gets correctly evaluated.
Make it possible to skip the terminal-launching test simply
by setting DISPLAY= . Previously, you had to unset DISPLAY,
which is a little more cumbersome.
https://bugzilla.gnome.org/show_bug.cgi?id=711178
One testcase was launching appinfo-test from a GAppInfo that
does not have a filename. In this case, the G_LAUNCHED_DESKTOP_FILE
envvar is not exported. Make appinfo-test deal with that, without
spewing warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=711178
The actions test tests the GSimpleActionGroup API. Maybe this
should be moved to use GActionMap, but for now, just disable
the deprecations.
There was also one test that wasn't actually hooked up, so
do that as well.
Most _list_schemas() uses were to check for the availability
of a particular schema. g_settings_schema_source_lookup() is
a better way to do this.
https://bugzilla.gnome.org/show_bug.cgi?id=712315
In Windows development environments that have it, <unistd.h> is mostly
just a wrapper around several other native headers (in particular,
<io.h>, which contains read(), close(), etc, and <process.h>, which
contains getpid()). But given that some Windows dev environments don't
have <unistd.h>, everything that uses those functions on Windows
already needed to include the correct Windows header as well, and so
there is never any point to including <unistd.h> on Windows.
Also, remove some <unistd.h> includes (and a few others) that were
unnecessary even on unix.
https://bugzilla.gnome.org/show_bug.cgi?id=710519
Assume unix platforms support the original POSIX.1 standard.
Specifically, assume that if G_OS_UNIX, then we have chown(),
getcwd(), getgrgid(), getpwuid(), link(), <grp.h>, <pwd.h>,
<sys/types.h>, <sys/uio.h>, <sys/wait.h>, and <unistd.h>.
Additionally, since all versions of Windows that we care about also
have <sys/types.h>, we can remove HAVE_SYS_TYPES_H checks everywhere.
Also remove one include of <sys/times.h>, and the corresponding
configure check, since the include is not currently needed (and may
always have just been a typo for <sys/time.h>).
https://bugzilla.gnome.org/show_bug.cgi?id=710519
Assume all supported platforms implement C90, and therefore they
(correctly) implement atexit(), memmove(), setlocale(), strerror(),
and vprintf(), and have <float.h> and <limits.h>.
(Also remove the configure check testing that "do ... while (0)" works
correctly; the non-do/while-based version of G_STMT_START and
G_STMT_END was removed years ago, but the check remained. Also, remove
some checks that configure.ac claimed were needed for libcharset, but
aren't actually used.)
Note that removing the g_memmove() function is not an ABI break even
on systems where g_memmove() was previously not a macro, because it
was never marked GLIB_AVAILABLE_IN_ALL or listed in glib.symbols, so
it would have been glib-internal since 2004.
https://bugzilla.gnome.org/show_bug.cgi?id=710519
