glib/po/zh_TW.po

# Chinese (Taiwan) translation for glib 2.x
# Copyright (C) 2001, 02, 03, 05 Free Software Foundation, Inc.
#
# XML glossary from http://xml.ascc.net/zh/big5/gloss.html
#
# Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>, 2005.
# Abel Cheung <abel@oaka.org>, 2001-2003, 2005.
# Woodman Tuen <wmtuen@gmail.com>, 2005.
# 
# 
msgid ""
msgstr ""
"Project-Id-Version: glib 2.9.2\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2006-01-05 22:21-0500\n"
"PO-Revision-Date: 2006-01-04 10:19+0800\n"
"Last-Translator: Abel Cheung <abel@oaka.org>\n"
"Language-Team: Chinese (Taiwan) <community@linuxhall.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: glib/gconvert.c:408 glib/gconvert.c:486 glib/giochannel.c:1150
#, c-format
msgid "Conversion from character set '%s' to '%s' is not supported"
msgstr "不支援將字元集「%s」轉換成「%s」"

#: glib/gconvert.c:412 glib/gconvert.c:490
#, c-format
msgid "Could not open converter from '%s' to '%s'"
msgstr "無法將「%s」轉換至「%s」"

#: glib/gconvert.c:606 glib/gconvert.c:995 glib/giochannel.c:1322
#: glib/giochannel.c:1364 glib/giochannel.c:2206 glib/gutf8.c:943
#: glib/gutf8.c:1392
#, c-format
msgid "Invalid byte sequence in conversion input"
msgstr "轉換輸入資料時遇到不正確的位元組組合"

#: glib/gconvert.c:612 glib/gconvert.c:922 glib/giochannel.c:1329
#: glib/giochannel.c:2218
#, c-format
msgid "Error during conversion: %s"
msgstr "轉換時發生錯誤：%s"

#: glib/gconvert.c:647 glib/gutf8.c:939 glib/gutf8.c:1143 glib/gutf8.c:1284
#: glib/gutf8.c:1388
#, c-format
msgid "Partial character sequence at end of input"
msgstr "輸入資料結束時字元仍未完整"

#: glib/gconvert.c:897
#, c-format
msgid "Cannot convert fallback '%s' to codeset '%s'"
msgstr "無法將後備字串「%s」的字元集轉換成「%s」"

#: glib/gconvert.c:1706
#, c-format
msgid "The URI '%s' is not an absolute URI using the \"file\" scheme"
msgstr "URI「%s」不是使用“file”格式的絕對 URI"

#: glib/gconvert.c:1716
#, c-format
msgid "The local file URI '%s' may not include a '#'"
msgstr "本機檔案的 URI「%s」不應含有‘#’"

#: glib/gconvert.c:1733
#, c-format
msgid "The URI '%s' is invalid"
msgstr "URI「%s」無效"

#: glib/gconvert.c:1745
#, c-format
msgid "The hostname of the URI '%s' is invalid"
msgstr "URI「%s」中的主機名稱無效"

#: glib/gconvert.c:1761
#, c-format
msgid "The URI '%s' contains invalidly escaped characters"
msgstr "URI「%s」含有「不正確跳出」的字元"

#: glib/gconvert.c:1855
#, c-format
msgid "The pathname '%s' is not an absolute path"
msgstr "路徑名稱「%s」不是絕對路徑"

#: glib/gconvert.c:1865
#, c-format
msgid "Invalid hostname"
msgstr "主機名稱無效"

#: glib/gdir.c:121 glib/gdir.c:141
#, c-format
msgid "Error opening directory '%s': %s"
msgstr "開啟目錄「%s」時發生錯誤：%s"

#: glib/gfileutils.c:576 glib/gfileutils.c:649
#, c-format
msgid "Could not allocate %lu bytes to read file \"%s\""
msgstr "無法配置 %lu 位元來讀取檔案「%s」"

#: glib/gfileutils.c:591
#, c-format
msgid "Error reading file '%s': %s"
msgstr "讀取檔案「%s」時發生錯誤：%s"

#: glib/gfileutils.c:673
#, c-format
msgid "Failed to read from file '%s': %s"
msgstr "讀取檔案「%s」失敗：%s"

#: glib/gfileutils.c:724 glib/gfileutils.c:811
#, c-format
msgid "Failed to open file '%s': %s"
msgstr "開啟檔案「%s」失敗：%s"

#: glib/gfileutils.c:741 glib/gmappedfile.c:133
#, c-format
msgid "Failed to get attributes of file '%s': fstat() failed: %s"
msgstr "獲取檔案「%s」的屬性失敗：fstat() 失敗：%s"

#: glib/gfileutils.c:775
#, c-format
msgid "Failed to open file '%s': fdopen() failed: %s"
msgstr "開啟檔案「%s」失敗：fdopen() 失敗：%s"

#: glib/gfileutils.c:909
#, c-format
msgid "Failed to rename file '%s' to '%s': g_rename() failed: %s"
msgstr "檔案名稱由「%s」改為「%s」失敗：g_rename() 失敗：%s"

#: glib/gfileutils.c:950 glib/gfileutils.c:1415
#, c-format
msgid "Failed to create file '%s': %s"
msgstr "建立檔案「%s」失敗：%s"

#: glib/gfileutils.c:964
#, c-format
msgid "Failed to open file '%s' for writing: fdopen() failed: %s"
msgstr "開啟檔案「%s」作寫入失敗：fdopen() 失敗：%s"

#: glib/gfileutils.c:989
#, c-format
msgid "Failed to write file '%s': fwrite() failed: %s"
msgstr "寫入檔案「%s」失敗：fwrite() 失敗：%s"

#: glib/gfileutils.c:1008
#, c-format
msgid "Failed to close file '%s': fclose() failed: %s"
msgstr "關閉檔案「%s」失敗：fclose() 失敗：%s"

#: glib/gfileutils.c:1126
#, c-format
msgid "Existing file '%s' could not be removed: g_unlink() failed: %s"
msgstr "現存檔案「%s」無法移除：g_unlink() 失敗：%s"

#: glib/gfileutils.c:1376
#, c-format
msgid "Template '%s' invalid, should not contain a '%s'"
msgstr "樣式「%s」無效，不應含有「%s」"

# (Abel) this is file template for mktemp/mkstemp
#: glib/gfileutils.c:1390
#, c-format
msgid "Template '%s' doesn't end with XXXXXX"
msgstr "檔案樣式「%s」末端不是 XXXXXX"

#: glib/gfileutils.c:1865
#, c-format
msgid "Failed to read the symbolic link '%s': %s"
msgstr "讀取符號連結「%s」失敗：%s"

#: glib/gfileutils.c:1886
#, c-format
msgid "Symbolic links not supported"
msgstr "不支援符號連結"

#: glib/giochannel.c:1154
#, c-format
msgid "Could not open converter from '%s' to '%s': %s"
msgstr "無法開啟將「%s」轉換至「%s」的轉換器：%s"

#: glib/giochannel.c:1499
#, c-format
msgid "Can't do a raw read in g_io_channel_read_line_string"
msgstr "在 g_io_channel_read_line_string 中無法讀取原始資料"

#: glib/giochannel.c:1546 glib/giochannel.c:1803 glib/giochannel.c:1889
#, c-format
msgid "Leftover unconverted data in read buffer"
msgstr "用來讀取資料的緩衝區中仍有未轉換的資料"

#: glib/giochannel.c:1626 glib/giochannel.c:1703
#, c-format
msgid "Channel terminates in a partial character"
msgstr "在字元未完整之前，輸入管道已經結束"

#: glib/giochannel.c:1689
#, c-format
msgid "Can't do a raw read in g_io_channel_read_to_end"
msgstr "g_io_channel_read_to_end 中無法讀取原始資料"

#: glib/gmappedfile.c:116
#, c-format
msgid "Failed to open file '%s': open() failed: %s"
msgstr "開啟檔案「%s」失敗：open() 失敗：%s"

#: glib/gmappedfile.c:193
#, c-format
msgid "Failed to map file '%s': mmap() failed: %s"
msgstr "對應檔案「%s」失敗：mmap() 失敗：%s"

#: glib/gmarkup.c:232
#, c-format
msgid "Error on line %d char %d: %s"
msgstr "第 %d 行第 %d 個字發生錯誤：%s"

#: glib/gmarkup.c:330
#, c-format
msgid "Error on line %d: %s"
msgstr "第 %d 行發生錯誤：%s"

#: glib/gmarkup.c:434
msgid ""
"Empty entity '&;' seen; valid entities are: &amp; &quot; &lt; &gt; &apos;"
msgstr "出現空白的實體「&;」；可用的實體為：&amp; &quot; &lt; &gt; &apos;"

#: glib/gmarkup.c:444
#, c-format
msgid ""
"Character '%s' is not valid at the start of an entity name; the & character "
"begins an entity; if this ampersand isn't supposed to be an entity, escape "
"it as &amp;"
msgstr ""
"實體名稱不應以「%s」開始，應該使用 & 字元；如果這個 & 字元不是作為實體使用，"
"請將 & 轉換為 &amp;"

#: glib/gmarkup.c:478
#, c-format
msgid "Character '%s' is not valid inside an entity name"
msgstr "實體名稱中不應含有字元「%s」"

#: glib/gmarkup.c:515
#, c-format
msgid "Entity name '%s' is not known"
msgstr "實體名稱「%s」意義不明"

#: glib/gmarkup.c:526
msgid ""
"Entity did not end with a semicolon; most likely you used an ampersand "
"character without intending to start an entity - escape ampersand as &amp;"
msgstr ""
"實體的結束部分不是分號；很可能您想使用 & 字元但未將它變為實體 ─ 請將 & 轉換"
"為 &amp;"

#: glib/gmarkup.c:579
#, c-format
msgid ""
"Failed to parse '%-.*s', which should have been a digit inside a character "
"reference (&#234; for example) - perhaps the digit is too large"
msgstr ""
"無法解析「%-.*s」，字元參引內應該含有數字（例如 &#234;）─ 可能是數字太大"

#: glib/gmarkup.c:604
#, c-format
msgid "Character reference '%-.*s' does not encode a permitted character"
msgstr "字元參引「%-.*s」無法表示任何能接受的字元"

#: glib/gmarkup.c:619
msgid "Empty character reference; should include a digit such as &#454;"
msgstr "字元參引是空白的；它應該包括數字，像 &#454;"

#: glib/gmarkup.c:629
msgid ""
"Character reference did not end with a semicolon; most likely you used an "
"ampersand character without intending to start an entity - escape ampersand "
"as &amp;"
msgstr ""
"字元參引的結束部分不是分號；很可能您想使用 & 字元但未將它變為實體 ─ 請將 & 轉"
"換為 &amp;"

#: glib/gmarkup.c:715
msgid "Unfinished entity reference"
msgstr "未完成的實體參引"

#: glib/gmarkup.c:721
msgid "Unfinished character reference"
msgstr "未完成的字元參引"

#: glib/gmarkup.c:964 glib/gmarkup.c:992 glib/gmarkup.c:1023
msgid "Invalid UTF-8 encoded text"
msgstr "無效的 UTF-8 編碼文字"

#: glib/gmarkup.c:1059
msgid "Document must begin with an element (e.g. <book>)"
msgstr "文件開始必須為一元素（例如 <book>）"

#: glib/gmarkup.c:1099
#, c-format
msgid ""
"'%s' is not a valid character following a '<' character; it may not begin an "
"element name"
msgstr "「<」字元後的「%s」不是有效的字元；這樣不可能是元素名稱的開始部份"

#: glib/gmarkup.c:1163
#, c-format
msgid ""
"Odd character '%s', expected a '>' character to end the start tag of element "
"'%s'"
msgstr "字元「%s」不尋常，元素「%s」的開始標籤應該以「>」字元結束"

#: glib/gmarkup.c:1252
#, c-format
msgid ""
"Odd character '%s', expected a '=' after attribute name '%s' of element '%s'"
msgstr "不尋常的字元「%s」，屬性名稱「%s」（屬於元素「%s」）後應該是「=」字元"

#: glib/gmarkup.c:1294
#, c-format
msgid ""
"Odd character '%s', expected a '>' or '/' character to end the start tag of "
"element '%s', or optionally an attribute; perhaps you used an invalid "
"character in an attribute name"
msgstr ""
"不尋常的字元「%s」，元素「%s」的開始標籤應該以「>」或「/」字元終結，也可以是"
"屬性；或許您在屬性名稱中使用了無效的字元"

#: glib/gmarkup.c:1383
#, c-format
msgid ""
"Odd character '%s', expected an open quote mark after the equals sign when "
"giving value for attribute '%s' of element '%s'"
msgstr ""
"不尋常的字元「%s」，當指定屬性「%s」的值（屬於元素「%s」）時，等號後應該出現"
"開引號"

#: glib/gmarkup.c:1528
#, c-format
msgid ""
"'%s' is not a valid character following the characters '</'; '%s' may not "
"begin an element name"
msgstr "「</」字元後的「%s」不是有效的字元；「%s」不可能是元素名稱的開始部份"

#: glib/gmarkup.c:1568
#, c-format
msgid ""
"'%s' is not a valid character following the close element name '%s'; the "
"allowed character is '>'"
msgstr "字元「%s」是無效的（位置在關閉元素「%s」末端）；允許的字元為「>」"

#: glib/gmarkup.c:1579
#, c-format
msgid "Element '%s' was closed, no element is currently open"
msgstr "元素「%s」已關閉，沒有開啟中的元素"

#: glib/gmarkup.c:1588
#, c-format
msgid "Element '%s' was closed, but the currently open element is '%s'"
msgstr "元素「%s」已關閉，但開啟中的元素是「%s」"

#: glib/gmarkup.c:1735
msgid "Document was empty or contained only whitespace"
msgstr "文件完全空白或只含有空白字元"

#: glib/gmarkup.c:1749
msgid "Document ended unexpectedly just after an open angle bracket '<'"
msgstr "文件在尖角括號「<」後突然終止"

#: glib/gmarkup.c:1757 glib/gmarkup.c:1801
#, c-format
msgid ""
"Document ended unexpectedly with elements still open - '%s' was the last "
"element opened"
msgstr "在仍然有開啟中的元素時，文件突然結束 ─「%s」是最後一個開啟的元素"

#: glib/gmarkup.c:1765
#, c-format
msgid ""
"Document ended unexpectedly, expected to see a close angle bracket ending "
"the tag <%s/>"
msgstr "文件突然結束，本來應該出現用來關閉標籤 <%s/> 的尖角括號"

#: glib/gmarkup.c:1771
msgid "Document ended unexpectedly inside an element name"
msgstr "在元素的名稱內，文件突然結束"

#: glib/gmarkup.c:1776
msgid "Document ended unexpectedly inside an attribute name"
msgstr "在屬性名稱內，文件突然結束"

#: glib/gmarkup.c:1781
msgid "Document ended unexpectedly inside an element-opening tag."
msgstr "在元素的開啟標籤內，文件突然結束"

#: glib/gmarkup.c:1787
msgid ""
"Document ended unexpectedly after the equals sign following an attribute "
"name; no attribute value"
msgstr "在屬性名稱的等號後，文件突然結束；沒有屬性值"

#: glib/gmarkup.c:1794
msgid "Document ended unexpectedly while inside an attribute value"
msgstr "在屬性值內，文件突然結束"

#: glib/gmarkup.c:1809
#, c-format
msgid "Document ended unexpectedly inside the close tag for element '%s'"
msgstr "在元素「%s」的關閉標籤內，文件突然結束"

#: glib/gmarkup.c:1815
msgid "Document ended unexpectedly inside a comment or processing instruction"
msgstr "在註解或處理指示內，文件突然結束"

#: glib/gshell.c:73
#, c-format
msgid "Quoted text doesn't begin with a quotation mark"
msgstr "應該用引號括起來的文字不是以括號為開始"

#: glib/gshell.c:163
#, c-format
msgid "Unmatched quotation mark in command line or other shell-quoted text"
msgstr "指令列或其它標為指令的字串內有不對稱的引號"

#: glib/gshell.c:541
#, c-format
msgid "Text ended just after a '\\' character. (The text was '%s')"
msgstr "文字在「\\」字元後就終止了。（文字為「%s」）"

#: glib/gshell.c:548
#, c-format
msgid "Text ended before matching quote was found for %c. (The text was '%s')"
msgstr "字串完結前仍沒有對應於 %c 的引號（字串為「%s」）"

#: glib/gshell.c:560
#, c-format
msgid "Text was empty (or contained only whitespace)"
msgstr "文字是空白的（或只含有空白字元）"

#: glib/gspawn-win32.c:276
#, c-format
msgid "Failed to read data from child process"
msgstr "無法從副進程讀取資料"

#: glib/gspawn-win32.c:291 glib/gspawn.c:1364
#, c-format
msgid "Failed to create pipe for communicating with child process (%s)"
msgstr "無法建立管道來和副進程溝通 (%s)"

#: glib/gspawn-win32.c:329 glib/gspawn.c:1028
#, c-format
msgid "Failed to read from child pipe (%s)"
msgstr "無法從管道讀取資料 (%s)"

#: glib/gspawn-win32.c:355 glib/gspawn.c:1233
#, c-format
msgid "Failed to change to directory '%s' (%s)"
msgstr "無法進入目錄「%s」(%s)"

#: glib/gspawn-win32.c:361 glib/gspawn-win32.c:581
#, c-format
msgid "Failed to execute child process (%s)"
msgstr "無法執行副進程 (%s)"

#: glib/gspawn-win32.c:471 glib/gspawn-win32.c:527
#, c-format
msgid "Invalid program name: %s"
msgstr "程式名稱無效：%s"

#: glib/gspawn-win32.c:481 glib/gspawn-win32.c:537 glib/gspawn-win32.c:780
#: glib/gspawn-win32.c:835 glib/gspawn-win32.c:1370
#, c-format
msgid "Invalid string in argument vector at %d: %s"
msgstr "第 %d 個引數中含無效的字串：%s"

#: glib/gspawn-win32.c:492 glib/gspawn-win32.c:548 glib/gspawn-win32.c:794
#: glib/gspawn-win32.c:848 glib/gspawn-win32.c:1403
#, c-format
msgid "Invalid string in environment: %s"
msgstr "環境變數中的字串無效：%s"

#: glib/gspawn-win32.c:776 glib/gspawn-win32.c:831 glib/gspawn-win32.c:1351
#, c-format
msgid "Invalid working directory: %s"
msgstr "無效的工作目錄：%s"

#: glib/gspawn-win32.c:890
#, c-format
msgid "Failed to execute helper program (%s)"
msgstr "無法執行協助程式 (%s)"

#: glib/gspawn-win32.c:1090
#, c-format
msgid ""
"Unexpected error in g_io_channel_win32_poll() reading data from a child "
"process"
msgstr "當 g_io_channel_win32_poll() 從副進程讀取資料時發生無法預計的錯誤"

#: glib/gspawn.c:168
#, c-format
msgid "Failed to read data from child process (%s)"
msgstr "無法從副進程讀取資料 (%s)"

#: glib/gspawn.c:300
#, c-format
msgid "Unexpected error in select() reading data from a child process (%s)"
msgstr "當 select() 從副進程讀取資料時發生無法預計的錯誤 (%s)"

#: glib/gspawn.c:383
#, c-format
msgid "Unexpected error in waitpid() (%s)"
msgstr "waitpid() 發生無法預計的錯誤 (%s)"

#: glib/gspawn.c:1093
#, c-format
msgid "Failed to fork (%s)"
msgstr "無法衍生進程 (%s)"

#: glib/gspawn.c:1243
#, c-format
msgid "Failed to execute child process \"%s\" (%s)"
msgstr "無法執行副進程“%s”(%s)"

#: glib/gspawn.c:1253
#, c-format
msgid "Failed to redirect output or input of child process (%s)"
msgstr "無法將副進程的輸出或輸入重新導向 (%s)"

#: glib/gspawn.c:1262
#, c-format
msgid "Failed to fork child process (%s)"
msgstr "無法衍生副進程 (%s)"

#: glib/gspawn.c:1270
#, c-format
msgid "Unknown error executing child process \"%s\""
msgstr "執行副進程“%s”時發生不明的錯誤"

#: glib/gspawn.c:1292
#, c-format
msgid "Failed to read enough data from child pid pipe (%s)"
msgstr "無法從 child pid pipe 讀取足夠的資料 (%s)"

#: glib/gutf8.c:1017
#, c-format
msgid "Character out of range for UTF-8"
msgstr "字元不在 UTF-8 範圍之內"

#: glib/gutf8.c:1111 glib/gutf8.c:1120 glib/gutf8.c:1252 glib/gutf8.c:1261
#: glib/gutf8.c:1402 glib/gutf8.c:1498
#, c-format
msgid "Invalid sequence in conversion input"
msgstr "轉換輸入資料時出現無效的字元次序"

#: glib/gutf8.c:1413 glib/gutf8.c:1509
#, c-format
msgid "Character out of range for UTF-16"
msgstr "字元不在 UTF-16 範圍之內"

#: glib/goption.c:468
msgid "Usage:"
msgstr "用法："

#: glib/goption.c:468
msgid "[OPTION...]"
msgstr "[選項...]"

#: glib/goption.c:556
msgid "Help Options:"
msgstr "說明選項："

#: glib/goption.c:557
msgid "Show help options"
msgstr "顯示說明的選項"

#: glib/goption.c:562
msgid "Show all help options"
msgstr "顯示所有的說明選項"

#: glib/goption.c:612
msgid "Application Options:"
msgstr "應用程式選項："

#: glib/goption.c:653
#, c-format
msgid "Cannot parse integer value '%s' for %s"
msgstr "無法給 %2$s 解析整數值「%1$s」"

#: glib/goption.c:663
#, c-format
msgid "Integer value '%s' for %s out of range"
msgstr "%2$s 的整數值「%1$s」超出範圍"

#: glib/goption.c:926
#, c-format
msgid "Error parsing option %s"
msgstr "解析 %s 選項時發生錯誤"

#: glib/goption.c:959 glib/goption.c:1070
#, c-format
msgid "Missing argument for %s"
msgstr "缺少 %s 的參數"

#: glib/goption.c:1474
#, c-format
msgid "Unknown option %s"
msgstr "未知的選項 %s"

#: glib/gkeyfile.c:339
#, c-format
msgid "Valid key file could not be found in data dirs"
msgstr "在資料目錄中找不到有效的設定鍵檔案"

#: glib/gkeyfile.c:374
#, c-format
msgid "Not a regular file"
msgstr "不是普通檔案"

#: glib/gkeyfile.c:382
#, c-format
msgid "File is empty"
msgstr "檔案是空的"

#: glib/gkeyfile.c:697
#, c-format
msgid ""
"Key file contains line '%s' which is not a key-value pair, group, or comment"
msgstr "設定鍵檔案中「%s」行並非設定鍵值配對、群組或註解"

#: glib/gkeyfile.c:765
#, c-format
msgid "Key file does not start with a group"
msgstr "設定鍵檔案並非以群組開頭"

#: glib/gkeyfile.c:808
#, c-format
msgid "Key file contains unsupported encoding '%s'"
msgstr "設定鍵檔案包含不支援的編碼「%s」"

#: glib/gkeyfile.c:1017 glib/gkeyfile.c:1176 glib/gkeyfile.c:2177
#: glib/gkeyfile.c:2242 glib/gkeyfile.c:2361 glib/gkeyfile.c:2497
#: glib/gkeyfile.c:2649 glib/gkeyfile.c:2823 glib/gkeyfile.c:2880
#, c-format
msgid "Key file does not have group '%s'"
msgstr "設定鍵檔案沒有群組「%s」"

#: glib/gkeyfile.c:1188
#, c-format
msgid "Key file does not have key '%s'"
msgstr "設定鍵檔案沒有設定鍵「%s」"

#: glib/gkeyfile.c:1289 glib/gkeyfile.c:1398
#, c-format
msgid "Key file contains key '%s' with value '%s' which is not UTF-8"
msgstr "設定鍵檔案包含的設定鍵「%s」（數值為「%s」）並非 UTF-8"

#: glib/gkeyfile.c:1307 glib/gkeyfile.c:1416 glib/gkeyfile.c:1788
#, c-format
msgid "Key file contains key '%s' which has value that cannot be interpreted."
msgstr "設定鍵檔案包含的設定鍵「%s」的數值無法解譯。"

#: glib/gkeyfile.c:2004
#, c-format
msgid ""
"Key file contains key '%s' in group '%s' which has value that cannot be "
"interpreted."
msgstr "設定鍵檔案包含的群組「%2$s」中設定鍵「%1$s」數值無法解譯"

#: glib/gkeyfile.c:2192 glib/gkeyfile.c:2376 glib/gkeyfile.c:2891
#, c-format
msgid "Key file does not have key '%s' in group '%s'"
msgstr "設定鍵檔案的群組「%2$s」中沒有設定鍵「%1$s」"

#: glib/gkeyfile.c:3067
#, c-format
msgid "Key file contains escape character at end of line"
msgstr "設定鍵檔案在行尾包含跳出字元"

#: glib/gkeyfile.c:3089
#, c-format
msgid "Key file contains invalid escape sequence '%s'"
msgstr "設定鍵檔案含有不正確的「跳出字元」「%s」"

#: glib/gkeyfile.c:3230
#, c-format
msgid "Value '%s' cannot be interpreted as a number."
msgstr "數值「%s」不能被解譯為數字。"

#: glib/gkeyfile.c:3240
#, c-format
msgid "Integer value '%s' out of range"
msgstr "整數值「%s」超出範圍"

#: glib/gkeyfile.c:3270
#, c-format
msgid "Value '%s' cannot be interpreted as a boolean."
msgstr "數值「%s」不能被解譯為邏輯值。"